1 Answer
- Procure some flexible waterproof membrane such as ice and water shield or window flashing tape. …
- Apply it to the sheathing along the concrete, tight to the joint. …
- Caulk the membrane/concrete joint with a high-quality caulk. …
- Reinstall your siding.
How do you waterproof concrete steps?
Carefully apply a waterproof epoxy caulk along all joints in between the steps and along walls, as well as any cracks the power washing exposed. Backer rods should be installed in cases of severe cracking or significant gaps between joints.
How do you protect concrete steps?
A concrete water and deicing salt repellent like the Siloxa-Tek 8500 is the best choice for concrete steps. The 8500 product is able to repel deicing salts that are commonly used on steps to protect the concrete from spalling, pitting, cracking and freeze-thaw cycle damage.
How do you waterproof a concrete porch?
Liquid Rubber Polyurethane Deck Coating makes it super easy to waterproof concrete patio floors, but for truly professional results, don’t cut corners. Strip – This step is only necessary if the patio has been previously painted. Use Liquid Rubber Smart Strip Plus to remove old paint.
How do you waterproof outdoor stairs?
How to Waterproof Stairs
- Sweep dust and dirt off the concrete, using a broom. …
- Apply painter’s tape along the edges of stairs, preventing sealer from seeping onto surrounding areas. …
- Mix the concrete sealer, using an electric mixer. …
- Seal the edges of the concrete, using a paint brush.
How do you weatherproof stairs?
Quote from Youtube video: And we'll take one step at a time making sure because it's very sticky on the back. So you have to it's a two-person process one person's gonna hold it up and the other person's gonna work with the
How do I keep my stair stringer from rotting?
Quote from the video:
Quote from Youtube video: So first off you always want to use pressure-treated wood. The second trick that I learned from a couple other carpenters is to drill lag bolts into the bottom of your stringer.
How do you seal steps?
SEALING THE STAIRCASE
- Lay out all the materials you need for this job. …
- Wipe the stairs clean. …
- Apply plenty of sealant evenly along the joint. …
- Finally, smooth the sealing joint gently by running a wet finger or putty knife over it. …
- After 30 minutes you can paint the joint. …
- Admire the result!
