According to your diagram, yes it is possible. You would connect it similar to your existing bathroom switch. Run a #14/2 ROMEX (or other appropriate cable) to the light fixture. The white wire would tie into the white wire on your diagram.
Can a light switch and outlet on same circuit?
In your case it is okay to install a receptacle alongside the switch. However you need a neutral as well as a hot wire which you may not have. Test to see if you have a neutral with a test light or meter. The neutral will be white but some switches are wired up with a white wire that is not a neutral.
Can you connect 2 lights to 1 switch?
The answer is yes; one switch can turn on multiple lights. You can use two ways to make your switch control multiple lights. The most common way is to daisy-chain the light fixtures through connecting them with each other and hooking the first fixture to the switch.
How do I wire a receptacle from a light but keep it hot when light is off?
In this case, you must change the cable from the switch to the light outlet from a 2-wire to a 3-wire cable. As you can see, connecting a receptacle to the light would see the receptacle only hot when the light switch is on.
How many lights can you have on one switch?
A regular 15A circuit can have up to 1400W of lights connected, or one 1400W light or 14 100W light bulbs. Most homes allow for 23 to 40 60-watt bulbs or 280 to 480 5-watt LEDs.
How do you split a light switch into two?
3 Answers
- Get a 2-gang box to replace your existing 1-gang box.
- Get a new switch.
- Remove your existing box and install the 2-gang box in its place.
- Run your supply hot wire to both switches.
- Connect the light/fan hot wire to one switch and the exterior light to the other.
- Join all neutrals and ground wires.
How do you wire multiple lights from one power source?
Quote from the video:
Quote from Youtube video: So you can just take some excess wire ground wire. And cut them up. So then you can use them as pigtails. And you're also going to repeat this process when we start hooking up the hot wires.
How many LED can lights can you put on one circuit?
Each CFL or LED bulb typically gives the same amount of light as a 60-watt incandescent bulb while drawing 10 watts or less, which is equivalent to a current draw of 1/12 amp. Thus a 15-amp circuit can safely control 180 or more fixtures that use CFL or LED bulbs.
How many lights can you switch on a 15 amp circuit?
Technically, you can have as many outlets on a 15 amp circuit breaker as you want. However, a good rule of thumb is 1 outlet per 1.5 amps, up to 80% of the capacity of the circuit breaker. Therefore, we would suggest a maximum of 8 outlets for a 15 amp circuit.
How many lights can be on a 15 amp switch?
For a 15-Amp circuit breaker, this will be a maximum of 12-Amps. Assuming a 60 watt light, you can put up to 24 lights on a 15 amp breaker. If you are using low-wattage LED bulbs, an LED bulb using 10 watts, you can install up to 150 bulbs on a single circuit.
What happens if you put a 15 amp switch on a 20 amp circuit?
15A switch will burn without 20A fuse ever noticing it. They must break first to protect the rest. If they don’t, they are no more a protection. If you want to use 15A switch you have to protect it with at most 15A rated fuse/breaker.
How many receptacles can be on a 20 amp circuit?
The answer to the question how many outlets on a 20 amp circuit is ten outlets. Always comply with the 80% circuit and breaker load rule, allowing a maximum load of 1.5 amps per receptacle. Remember that your circuit, wire sizes, and outlets must be compatible to avoid overheating and electrical hazards.
How many LED can lights on a 20 amp circuit?
Maximum Lights Per Circuit
Technically, you can install 13 outlets or lights on a 20-amp CB, but you can only put ten lights per circuit due to the 80% rule of maximum continuous load.
How many lights can you put on one 15 amp or 20 amp breaker?
You can safely run up to 40 50-watt lights on a 20-amp breaker of 120 volts.
How many receptacles can you have on a circuit?
Basically, there is no limit on how many outlets your circuit breaker can support. It is acceptable to put as many plugs as you want, as long as you don’t need to run appliances or devices that will overload your 15 amp circuit breaker. Generally, though, we only use up to 80% capacity of a circuit breaker for safety.
How many ceiling fans can be on a 15 amp circuit?
How many ceiling fans on a 15 amp circuit? A 15 amp circuit should be able to run 4 ceiling fans without any problem. For example, a 52 inch fan is between 90 and 100 watts at a high speed setting with three 60 watt light bulbs. That means that each fan will use around 280 watts.
Can you daisy chain ceiling fans?
Quote from the video:
Quote from Youtube video: It's called a daisy chain. Goes from one to another this wire actually goes off to your switch. And a light fan.
Does a ceiling fan need a dedicated circuit?
Ceiling Fans are Typically Wired on a Shared Circuit with Other Lights and Outlets. Due to the small amount of amperage a ceiling fan does not require a dedicated circuit.
