How do you remove a bathroom floor from concrete?
Quote from the video:
Quote from Youtube video: And another thing we did is we had a fan blowing out the bathroom window to to kind of alleviate some of that dust. Close the bathroom door and tape it up because this stuff will get everywhere.
How do you remove concrete from under tile?
Quote from the video:
Quote from Youtube video: Work in rows making sure not to leave gaps in between you don't want to leave any ridges of thin-set. Left behind on the concrete. You can usually tell by the feel of the chisel.
How do you prepare an old concrete floor for tile?
Start by sweeping your concrete floor to get rid of all dust and debris. Then clean with a wet mop of plain water. Use a few tablespoons of a degreasing cleaner in warm water and scrub the concrete with a scrub brush. Finally, rinse thoroughly.
How do you remove a mortar bed from an upstairs bathroom?
Quote from the video:
Quote from Youtube video: But I think the best way to do it is to go ahead and pull the mud up first. Just went to this area right here. It's probably about a six by eight area it's gonna fill up one of these trash bins.
How do you remove concrete from a shower floor?
Quote from the video:
Quote from Youtube video: With a jackhammer I'm going to use a little jackhammer to do it with a handheld one the worst thing you can do if you want to make it as hard as possible is go to the middle of the slab.
How do you remove a concrete slab from a shower?
Quote from the video:
Quote from Youtube video: So what we're going to do is we're going to tear up this whole floor this whole old concrete mud pan there you go black out there for a second first thing we're going to do is unscrew.
How hard is it to remove tile from concrete floor?
There’s no easy way on how to remove tile. Unlike tile on cement board or wood, there’s no underlayment or subfloor that can be pried up and thrown away. How to remove tile from concrete requires knocking out the tiles and adhesive.
How do you remove concrete from concrete?
Quote from the video:
Quote from Youtube video: For more hardened jobs completely saturate the area of hardened concrete to be removed. Do not dilute this product with water as dilution will deactivate the dissolver.
What removes cement from tiles home remedies?
How to remove cement stains from tiles
- Soak. Soak a cloth well with white vinegar.
- Apply. Place the cloth over the stain.
- Let it sit. Let the cloth soak the stain well, leaving it on for 2 hours.
- Reapply. If the vinegar keeps evaporating, reapply it periodically to keep the area wet.
- Scrub. …
- Repeat. …
- Rinse. …
- Wash.
Can you tile over old mortar bed?
You can put new thinset on top of old, but only if the old thinset is perfectly smooth and level. This is rarely the case once the old tiles have been removed. The best option to smooth out the old thinset and prepare it for new tiles is to grind it down.
How do you remove a tub from a mortar bed?
Re: Remove bathtub cemented in
That mortar bed should be about 2″ thick, have wire on the bottom of it, and it’s either attached to plywood or 1x boards. As long as there is nothing to be damaged, a sledge hammer will make short work of things. A 5 pound hammer would suffice, or a steel or fiberglass handled hammer.
How do you remove a thick mortar bed?
Chisel through tile surfacing and the mortar bed in a small section using a cold chisel and hammer. Chisel through the mortar until the underlying substrate is reached and identified. In most cases, this will be a layer of building or tar paper stapled to the subfloor.
How do you remove thick mortar from concrete floor?
Some Thinset mortar can be removed by using a chipping hammer with a scraper attachment. Use short jabbing motions to get under the mortar and pop it from the floor. But, if the mortar is stubborn, you may have to go directly to the big tools.
How do you remove old mortar from shower floor?
Quote from the video:
Quote from Youtube video: The wall done first these come off pretty easy. So you want to go underneath them and lift them up once you lift a couple up then you start from there.
How do you remove old mortar from tile?
Quote from the video:
Quote from Youtube video: And a lot of them could be pretty stubborn to get out. So what I suggest is a flat razor just scrape the majority of excess off the tile.
How do you remove cement from back of ceramic tile?
Apply muriatic acid directly to the back of a piece of tile if the mortar is particularly thick, such as more than 1/8 inch. Use a paint brush and coat the mortar with pure acid. As it loosens the concrete, use your scrub brush with water to gently scrub and remove the excess. Apply more as needed.
How do you remove grout and mortar from tile?
Remove mortar marks by wiping down the surface repeatedly. Focus cleaning on areas with the thickest layer of thinset. Gently use a scraper or a razor blade to carefully chip away mortar stains. Wipe the tile floor with a clean cloth dampened with warm water.
