Pergo want to absolve themselves of as much liability as possible, so they require expansion joints at all room connections. Obviously this isn’t always necessary to prevent movement issues. You’ll have to make a risk judgement.

Does all laminate flooring need expansion gap?

Expansion gaps are essential in all laminate floor installations. Temperature and humidity will change in all rooms. This result is the laminate flooring will expanding and contract as the temperature and humidity change.

What happens if an expansion gap is not left?





When you don’t have the proper expansion gap, the pressure caused by the natural expansion of the floor will need to go somewhere. This causes the floor to buckle and often leads to irreversible damage that calls for plank replacement. Buckling: What happens when a floor can’t expand properly.

What is the maximum floor length I can install without expansion joint?

If the room is more or less square and if there aren’t too many indoor climate changes between weekdays and the weekend or during the day, then you can lay up to 13 running metres without extra expansion joints in the floor surface. The expansion joint along the walls depends on the total length of the floor.

Can you install laminate without transition?

When installing laminate flooring, it can be set without the transitions. Yet, this will make the installation a lot more difficult. Having that in mind, you should make a plan a do a thorough preparation first. It is not impossible to achieve the flow in the installation and appearance.

Do you have to use quarter round with laminate flooring?

No you never need to use quarterround.

How do you stop laminate flooring at doorways?





How To End Flooring at a Doorway

  1. Lift to Fit. Plan on a seam in the middle of the doorway. Notch and cut the first piece to fit and then slide it completely under the jamb. …
  2. Slide Both Pieces Over. Once the two pieces are connected, slide them both over just far enough so that both jambs cover the flooring ends. 11 / 12.


Are transition strips necessary?

Transition strips are especially important when you are going from one thickness of floor covering to another. It’s common to have an area that has thick carpet that transitions to concrete or carpet that transitions to another hard surface like wood, laminate or linoleum.

Do you need transition strips between rooms with same flooring?

Between two rooms utilizing the same flooring material. While you may be able to get away without a transition strip in these spaces, using one can better allow for expansion and contraction over time. This is particularly important with wood plank, vinyl plank or tile materials.

Can you install Pergo backwards?



Quote from the video:
Quote from Youtube video: I'm gonna break it really easy. So by laying the floor backwards. I have a smaller more durable tongue sticking out. And I can hit it almost as hard as I want with my mallet without doing any damage.

Does it matter which direction you lay laminate flooring?

The direction of your flooring boards has a huge impact on a room’s overall appearance and can be a tough nut to crack. As a general rule, make sure to lay your floor in the same direction as the main light source in a room and in the same line as the most frequently used entrance.

How do you start laminate flooring in multiple rooms?

Laying the Floor



The installation starts in the corner of the house and proceeds through the first room until the edge of the flooring extends beyond the walls. It then continues straight into the adjoining rooms unless you change direction with a transition.

How do you cut the tongue off a laminate floor?



The tongue against the wall should be removed. You can use a sharp utility knife for the 7-mm or 8-mm product, but 10-mm or 12-mm product will require a saw.It is important to work from left to right to avoid damaging the tongues on the short side of the boards.

Should I cut tongue off first row of laminate?

Place the first plank with the tongue side towards the wall, being sure to allow 1/8″ for expansion. We recommend cutting off the tongue on this first row to avoid any problem with the expansion gap. Insert the second plank into the first at an angle pressing the short ends together; then press it down.

How do you start laminate flooring in a doorway?

Quote from the video:
Quote from Youtube video: Using an oscillating. Tool we can set our plank flat on the ground. And then set the saw on top for a nice flush. Cut.

Do you need to stagger laminate flooring in hallway?

Laminate flooring manufacturers often require their floors to be staggered anywhere between 6 to 12 inches, some manufacturers even want more.

How do you stagger Pergo flooring?



Quote from the video:
Quote from Youtube video: When it comes to staggering the rows. Each manufacturer is going to have their own specific measurement that they want you to keep when it comes to end joints and how close they should be aligned.

What is the best direction to install laminate flooring?

In what direction should you lay a laminate floor? In most cases, you should lay your laminate flooring parallel to the longest side of the room or your home. This will create a more natural flow and will accentuate the length of the room better.