How do you make an extension cord with multiple outlets?
Quote from the video:
Quote from Youtube video: So by making this quad box what you're doing is this is just regular residential plugs. But I can replace these plugs easily. So if these get worn and I plug them in and they just don't hold anymore.
How many watts can a 12 gauge extension cord handle?
Matching Extension Cord to Load
| Extension Cord Wire Gauges, Amperage Rating, and Wattage | ||
|---|---|---|
| #18 | 5 Amps | 600 Watts |
| #16 | 7 Amps | 840 Watts |
| #14 | 12 Amps | 1,440 Watts |
| #12 | 16 Amps | 1,920 Watts |
What is an 18 AWG extension cord?
The 18 AWG (American Wire Gauge) pure copper conductor transfers maximum power. This cable operates on 125 volts / 10 Amp power with a max of 300 volts. The 10 Amp high capacity means these cords can be used in any room in the house, even the kitchen and the laundry room.
What is a 16 3 extension cord?
These are the gauge of the wire and number of conductors (wires) in the cord. So, a number like ’12 3′ means the cord has 12 gauge diameter wire and 3 wires. Here is the breakdown: 16 gauge=light duty.
How many amps can a 16 gauge extension cord handle?
Any 16-gauge cord between 0 and 100 feet long can adequately handle tool loads up to 10 Amps.
How many watts can a 16 gauge extension cord handle?
As the cord gets longer, the current carrying capacity of the cord gets lower. For example, a 16 gauge extension cord less than 50 feet in length can power a 1625 watt (W) appliance. A 16 gauge cord that is longer than 50 feet in length can only power an appliance up to 1250W.
What is a 16 gauge extension cord good for?
Sixteen-gauge cords are low wattage and are intended for use with small appliances such as portable fans, alarm clocks, table lamps, or floor lamps (note: an electronic device such as a TV or computer should be connected to a surge protector).
What happens if you overload an extension cord?
Extension cords can overheat and cause fires when used improperly. Overheating is usually caused by overloading or connecting appliances that consume more watts than the cord can handle. Damaged extension cords can also cause fires.
What is the ampacity of 16 AWG wire?
Related Resources
| Size | Temperature Rating of Copper Conductor | |
|---|---|---|
| (AWG or kcmil) | 60°C (140°F) | 90°C (194°F) |
| 16 AWG | — | 18 |
| 14 AWG* | 25 | |
| 12 AWG* | 30 | |
How far can you run 12 gauge wire on a 15 amp circuit?
You can run a 12 gauge wire up to 70 feet on a 15 amp circuit. That number drops to 50 feet if you run 12 gauge wire on a 20 amp circuit.
How many amps will 4 AWG carry?
Size & AMP Ratings
| NM, TW, & UF WIRE (Copper Conductor) | SE CABLE (Copper Conductor) |
|---|---|
| 14 AWG – 15 AMPS | 8 AWG – 50 AMPS |
| 12 AWG – 20 AMPS | 6 AWG – 65 AMPS |
| 10 AWG – 30 AMPS | 4 AWG – 85 AMPS |
| 8 AWG – 40 AMPS | 2 AWG – 115 AMPS |
What is AWG wire used for?
AWG is of primary importance for wires that will carry electrical power — for example, home or business electrical wiring, extension cords or high-power wire in automotive or audio use. If too small a wire is used (high AWG), then the wire may overheat, melt or catch fire.
What is the difference between 4 0 and 4 AWG?
That is, 0000 can also be called 4/0, (or, like, 4 zeros, or in wire-nerd-speak, “four-aught”). Where a 4AWG wire is a little less than a 1/4″ thick, a 4/0 is about a half-inch thick. Big difference.
What is 4 AWG wire used for?
This wire is 4 AWG, good for 95 Amp when used in conduit with less than 3 conductors. This wire is rated for use in dry or wet locations, raceways, or conduit. It can be used outside exposed to the weather as well, though the insulation is not 100% UV-proof and installation in conduit is recommended.
