Can you use a brad nailer for molding?

The small 18-gauge brad nail helps you to attach delicate trims without splitting the trim. In contrast, finish nail guns that drive thicker nails offer more holding strength. With a brad nailer, you can attach thin trims and moldings without the need for using putty.

What type of nail gun do I need for molding?





Finish Nailers

If you’re planning on installing heavier pieces, like heavy crown molding or anything that needs to be able to bear a little weight, pick 16 – 15 Gauge Finish Nailers. Some DIY users recommend the 16 gauge finish nailer as the most versatile option.

What kind of Brad nailer do I need for trim?

Nailers that shoot the biggest trim nails—15 and 16 gauge—are usually called “finish nailers.” Midsize 18-gauge nailers are called “brad nailers.” The smallest nailer, the 23-gauge, is usually called a “pinner” or “micro pinner.” This is the gun I usually grab for nailing large 3/4-in. -thick baseboard and trim.

What kind of nail gun do I need for trim and baseboards?

The 16-Gauge Nailer is Versatile



Carpenters use them for a wide variety of tasks including interior trim, baseboard, and crown. You can do stair risers with them, and they’re a good option to nail down tongue and groove flooring like near a wall or in a closet where a flooring nailer won’t work.

Should I use a brad nailer or finish nailer for baseboards?





In terms of best uses, brad nails are better suited for tasks like light decorative trim and molding, paneling, picture frames, and crafts such as birdhouses. Finish nails are better suited for larger trim, such as baseboards or crown molding.

What is the difference between a nail gun and a brad nailer?

What’s the Difference Between a Brad Nailer vs Finish Nailer? The main difference between these two different nail guns is the size of the nail they shoot. The lower the gauge number, the thicker the nail. The brad nailer fires 18 gauge nails, and the finish nailer fires 16 gauge nails.

Is 18 gauge brad nailer good for baseboard?

Can You Use 18 Gauge Nails (Brad Nailer) for Baseboards? Yes, you can use an 18-gauge Brad Nailer for your baseboards. However, it doesn’t have the holding power compared to a 15 or 16-gauge nail.

Can you use 18-gauge nails for baseboards?

What gauge nails to use for baseboards? Based on nail size, you should be looking for anything between 15 gauge and 18 gauge. With these gauges it you can easily find nails up to 2.5” long which is an ideal length for baseboard nails.

What gauge nailer is best for trim?



15-gauge nails are most often used for installing thick trim. 18-gauge and higher-gauge nail guns are best used for fine detail work, furniture repair and thin trim work.

Which is better 16 or 18-gauge nail gun?

With a thickness of 0.0625-inch, 16-gauge finish nailers can hold better when compared to 18-gauge brads. It is supplied in lengths of 1 to 3.5-inch. 16-gauge finish nails are perfect for dense pieces of wood.

What is a brad nailer good for?

For delicate finishing touches, a brad nailer is best.



A brad nailer is a light-duty tool. It might be used for adding narrow decorative moldings to plain panels or under stair treads. These tools are popular with crafters and model makers. They are often used for making birdhouses and bat boxes.

How do I choose a brad nailer?



Quote from the video:
Quote from Youtube video: Sometimes you'll also see with any fine woodworking that it may split the wood. So depending on your application you can choose the right nailer for that one more visit nail gun depot.com.

Is a brad nailer worth it?

For detailed woodwork and trim, where you need more holding strength than a micro pin can provide, a brad nailer is typically the top choice among contractors and weekend warriors alike. Brad nails are formed from a fine, 18-gauge wire, which means they are smaller in diameter and typically have less holding strength.

Can I use a brad nailer for baseboards?

Q. Can you use a brad nailer for baseboards? Brad nailers are suitable for baseboards. Most fire brads as long as 2 inches, which is enough to penetrate a 3/4-inch thick molding, 1/2-inch thick drywall, and bite into the framing lumber in the baseplate or wall studs.

What nail gun is best for DIY?

The best nail gun for home use is the CRAFTSMAN Cordless Brad Nailer Kit. This cordless brad nailer removes the hassle of purchasing an air compressor by utilizing rechargeable batteries that are capable of accurately driving nails for small DIY projects around the home.

Do electric nail guns work?



Having tested most of the current batch of battery-powered cordless nailers on the market, they perform very well. Most perform as expected and provide hassle-free nailing. Neither pneumatic nor cordless nailers stay jam-free forever, but proper maintenance keeps them firing effectively.

What is the best electric nail gun on the market?

The Best Cordless Nail Guns

  • Best Overall: Metabo-HPT NT1850DF.
  • Most Powerful: Milwaukee 2746-21CT.
  • Most Reliable: DeWalt DCN680D1.
  • Most Improved: Craftsman CMCN616C1.
  • Best Value: Ryobi P320.
  • Best in Tight Spaces: Makita XNB02RJ.