Why do you need a hot water return?

Secondary hot water returns are generally used in domestic hot water applications where the point of usage (i.e. taps) are a distance away from the hot water cylinder. They are used to remove the need to draw off a large quantity of cool water, ( left in the pipe run), before hot water actually reaches the tap.

Do you need a return line for hot water heater?





In a traditional hot water recirculating system, there is a dedicated return line for the hot water pipes, which runs from the furthest bathroom or fixture back to the water heater. Near the water heater area, a recirculating pump pulls the water from the furthest fixture back into the water heater, creating a loop.

Are recirculating pumps bad for pipes?

Recirculating Hot Water Can Corrode Pipes.

How long does it take for hot water to comeback?

How long does it take for hot water to return? Typically, a water heater tank takes 30 to 40 minutes to heat up so if your water heater is still working, you can count on having more hot water come back in that amount of time as long as your system is still working adequately.

Are hot water recirculation pumps worth it?

A hot water recirculating pump will save you money, especially if you have a larger family. A family of 4 with normal water usage can expect to save $50-$75 a year. Since pumps cost about $200 each, the recirculating pump will pay for itself in 3-4 years. .

How much does it cost to install a hot water recirculation pump?





With the average national cost of water rising rapidly, a hot water recirculation pump could easily save you upwards of $50 each year. Since these pumps cost between $200 and $250 each, you could pay back the investment within a couple of years.

How do I install a hot water return line?

Quote from the video:
Quote from Youtube video: The hot water discharge line coming out of the water heater insert a gasket into the female fitting on the recirculating pump. And screw it onto the threads of the water heater discharge.

How do you plumb a hot water return line?

Quote from the video:
Quote from Youtube video: You could put them in the vertical. So spring-loaded check valve on the feed we always put arrows on them so we know what direction. So the blue comes down goes up into the service valve.

What is a dedicated hot water return line?

A dedicated return line system uses a return pipe from the last sink back to the hot-water tank or tankless heater. The homeowner needs to know if he or she has a hot-water tank or a tankless system, and a one-pipe or dedicated return line, in order to select the correct recirculation components.

How long should a 40 gallon hot water tank last?



For the most part, a 40-gallon water heater should last between 10 and 12 years. Some units come with a warranty, so you should check before buying. The following are a few signs that it may be time to replace your water heater: You are getting less hot water than normal.

Why does my hot water run out so fast?

This happens over time as your water heater ages. If you haven’t maintained your water heater with annual system flushes, this could be the problem. Sediment is formed from loose minerals that are found naturally in water. When they settle at the bottom of the tank, it causes your tank to run out of hot water quickly.

Does turning up water heater make hot water last longer?

Turning up the water heater temperature makes hot water last longer as the desired temperature is reached by using less hot water and more cold water. The recommended maximum temperature should be 120 °F. Hotter water poses risks to users and the water heater and increases energy bills.

Do circulator pumps run all the time?



The most common circulator pumps run all day, every day, whether you’re actively using hot water or not. This causes a lot of heat to dissipate in the pipes 24/7 and requires the water heater to work harder to keep the water hot.

Do recirculating pumps waste energy?

Some recirculation systems have pumps that run constantly or on a timer, but both types inevitably waste energy.

Will a recirculating pump prevent freezing?

Install hot water recirculating pump.



Installing a hot water recirculation system helps ensure that you always have hot water in your taps and prevents pipes from freezing during the winter.

How does a hot water return work?

This system creates a loop from the water heater to the faucet and back again. The unused hot water is drawn back through this loop by the pump, so when you turn on your hot water faucets, you get hot water quickly. Water is not left in the pipes to get cold and you waste less water because you don’t have to wait.

How does hot water flow and return work?



The hot water circulates from the heat source via gravity using the principle of convection (see Unit 03: Scientific Principles). The heated water in the boiler rises through the primary flow connection, heating the water before cooling and returning to the boiler through the primary return pipe.

What is a water return pipe?

a pipe by which water of condensation from a heater or radiator is conveyed back toward the boiler.

What is water return supply?

Return water or return flow means the portion of water diverted from a water supply which finds its way back into a watercourse.

Where should I put my return and supply ducts?

They must be correctly placed and unobstructed —Return ducts are usually placed in hallways, under stairwells, or in larger open areas of your home. This placement ensures that they will be able to pull in enough air to take back to the HVAC equipment.

How many return vents should a house have?



Ideally, every room except the kitchen and bath should have its own return air grille. At the very least, each level of the house should have one. Even so, many homes were built with just one or even no return ducts in an attempt to cut costs.

How do you pipe a hot water return line?

Quote from the video:
Quote from Youtube video: You could put them in the vertical. So spring-loaded check valve on the feed we always put arrows on them so we know what direction. So the blue comes down goes up into the service valve.

Can you use plastic pipe on secondary return?

Assuming you’re talking about hot water secondaries, rather than heating returns, don’t forget you can’t use plastic pipe.

How do I circulate the hot water in my house?

Quote from the video:
Quote from Youtube video: Back at the heater is a pump that moves hot water through the recirculation. Line it'll get hot water to the furthest plumbing fixture. And will deposit. Any cool water that was in the line.