Are all shower stems the same?
Today, most brands have their own specifications and parts. Now there is variance in stems (cartridges), valves, and splines. Because of this, you will need to know how to identify the brand of your faucet before you can fix it. Knowing what you’re working with makes it easier to disassemble and fix.
How far should shower valve sticks out from wall?
A shower valve should not stick out too much from the wall. It’s recommended for the base of a shower valve to sit flush against the wall. In general, a shower valve can stick out 3-4 inches from the wall. If it sticks out too much, this can look odd and take away from the shower’s aesthetic.
How tight should a shower stem be?
Be sure not to overtighten; the screw needs to be tight enough that the faucet doesn’t leak but not so tight that it introduces stress inside the handle. Once reassembled, check to make sure the valve is turning more easily.
How do you measure a shower stem?
- It is easiest for us to identify your stem or handle needs by measuring your stem from the left where the washer is attached to the right where the handle fits on the knurled end (The Broached end).
- Broached ends are unique by manufacturer and is critical when identifying your stem or cartridge.
Do you have to replace valve when replacing shower faucet?
The first issue to look for is if there are any leaks in the valve when you turn on the water. If there are drips, that’s a good indication that you should think about replacing the valve. Because, not only are you wasting water, but water that leaks behind the wall can cause rot as well as mold and mildew growth.
Are shower rough in valves universal?
Yes! Shower rough in valves without stops are by far the most common. They work absolutely as well in every way.
What do you do if your shower valve sticks out too far?
Quote from the video:
Quote from Youtube video: And push it back or go in from the back wall neither of these are viable options I did not want to move the backplate. Forward by putting a ring behind it because that would look tacky.
How do you fill gap between tub spout and wall?
Caulk It. If you’ve got a gap of 1/2 inch or less after you tighten the spout as far as it will go, the best way to erase it is to fill it with silicone caulk. Choose white caulk or one that matches the wall color, spread a thick enough bead to fill the gap, then tool it with your finger to give it a concave shape.
How do you change the depth of a shower valve?
Quote from the video:
Quote from Youtube video: Here's a foolproof tip that i used to set my valves to the right depth i grabbed my backer board applied thinset over top of that followed by kerdi. Then i applied thinset on top of that.
How far can shower head be from valve?
How Far Can Shower Head Be From Valve? A showerhead can be 2-3 feet away from a valve as long as it’s integrated into the plumbing. The water needs a controlled path to travel without the potential of a blockage.
How high should a shower faucet be?
A shower valve and spout should be about 38 to 45 inches above ground. If you also have a bathtub, the valve should be installed 8 to 18 inches above the tub spout.
How do you rough in a Moen shower valve?
Quote from the video:
Quote from Youtube video: So let's dive in the first step was to see how high to set this now this Moen roughing valve also has pecs stub outs on the side. We're also going to use copper for the top.
Can you use sharkbite for shower valve?
Quote from the video:
Quote from Youtube video: And then we're gonna hook it all together with the teff one thing cool about these elbows that I've found it's just sharkbite. So you push together. And you want to worry about it simple easy.
Can you run PEX to shower head?
Use threaded PEX water line fittings for shower valves. Tighten the fittings before crimping the PEX water line. A plastic bracket forms the sharpest 90-degree angle permitted for this brand of PEX.
What Moen shower valve do I have?
Look closely at the handle buttons that were attached to the shower valve. Typically, “Moen” will be written in the middle of the “Hot” and “Cold” buttons. If you do not see this, the handle buttons have been replaced, or the “Hot/Cold” button is a lever (wall escutcheon).
How do I know which shower cartridge to buy?
Easiest of all is when it says the brand name right on the faucet face. But you should also look at the bottom of the faucet, on the handles or on the round plate behind the handles. If you find a brand name, go to the manufacturer’s website and call the contact number for assistance.
Are Moen and Delta shower valves interchangeable?
Shower valves are not interchangeable. When you buy a shower valve kit, everything is compatible and made by the same manufacturer. They are sold this way because many shower valves made by the same manufacturer are not compatible, let alone another company’s valve. So you cannot use a Moen valve with Delta products.
