What is code for washing machine drain?
2 inches
According to the Universal Plumbing Code, the standard for washing machine drain size is 2 inches. The P-trap should be between 6 and 18 inches high from the floor, while the pipe should be between 18 and 30 inches high from the floor. These standpipes connect to the home sewage system and should also be vented.
How high should a washer and dryer outlet be?
34-36 inches high
While it depends on local building codes, electrical connections for washers and dryers usually need to be placed less than 6 feet from the unit and 34-36 inches high.
How high should a washing machine outlet pipe be?
In order for the drain hose on your Top Load washer to function properly, the drain must be at least 30″ up from the floor and less than 8 feet high. In order for the drain hose on your Front Load washer to function properly, the drain must be at least 24″ up from the floor and less than 8 feet high.
Where should the outlet be for a washing machine?
Outlet Placement
Your washing machine outlet should be placed up and out of the way of the drain hose and water lines that are attached to your machine. This is both an ease-of-use issue and a safety one. Placing the outlet above the machine allows you to unplug the unit without having to pull it out from the wall.
Where does the water drain from a washing machine?
The drain pump may be located behind removable panels in either the front or back of the washing machine, even underneath the appliance, requiring you to tip the machine forward to access it (consult your owner’s manual for instructions). You’ll see a drain hose and inlet hose connected to it with spring clamps.
Does a washer drain have to have a P-trap?
If your washing machine drains to a sewer line, such as a city sewer system or a septic tank, it must have a P-trap. A P-trap contains water in its bend. This water is an essential vapor barrier that prevents sewer gas from coming up through the drain line and entering your home.
Does a washer need a special outlet?
Washer –Washing machines are large appliances that do not require customized electrical hookups, they simply need a 120 volt outlet that can take 3 prongs.
Where does the outlet go on a washer and dryer?
Electrical hookups for washers and dryers should be placed within 6 feet of the unit. While a minimum height for outlets in a home may very, depending on local building codes, for convenience both outlets should be placed between 34 and 36 inches high.
Can a washing machine share an outlet?
Standard household electric power in the United States is 110 to 120 volts, with a 60-cycle alternating current, and most household washers can be plugged into wall outlets supplying this current.
Should washer outlet be GFCI?
GFCI Protection:
210.8(A)(10) – All 125V, 15a and 20a receptacles installed in “Laundry Areas” shall have GFCI protection. The NEC doesn’t require GFCI protection for clothes washing machines specifically, but it does for “Laundry Areas.”
Should a washing machine be plugged into a GFCI outlet?
It is possible for homeowners to believe that a washing machine requires a GFCI outlet. If you only have a washing machine in the laundry room, GFCIs are not required. A GFCI outlet is required if the sink is within six feet of the washing machine outlet.
Can I plug my washer and dryer into the same outlet?
In the Laundry Room
If you have a gas dryer, both your washing machine and gas dryer may be plugged into the same outlet. If you have an electric dryer, it will need its own dedicated 20-amp, 220-volt circuit.
Does a washing machine have to be on its own circuit?
A washing machine itself does not need a dedicated circuit, but it might make the most sense to give it one depending on your dryer. For example, if you have a gas dryer, it’s okay to plug both the washer and dryer into the same outlet. Electric dryers need their own dedicated circuit, however.
Can a fridge and washing machine be on the same circuit?
Refrigerators are considered noncontinuous duty loads. Loads that draw current for less than three hours at a time are allowed to be on the same circuit with other noncontinuous loads, as long as the total load does not exceed the circuit breaker rating.
Do washer and dryer need separate circuits?
While a dedicated circuit supplies only one appliance, a designated circuit is intended for single-use, not necessarily a single appliance. The “use” in this case is laundry, and you can plug both a washer and a gas dryer into the same receptacle.
