How thick do cabinet doors need to be for hidden hinges?
Concealed hinges can go in face-frame or frameless cabinets and on any door type—including full overlay, partial overlay, or inset—as long as the doors are at least ½ inch thick.
What size cabinet hinges do I need?
You should check the diameter of the hole in the door that your current hinge sits in – these are usually 26mm, 35mm or 40mm for larger hinges. It’s important to measure the hole in the door and not the hinge itself as the hinge may be slightly smaller.
What does 1/2 inch overlay hinge mean?
1/2″ overlay hinges are the most common overlay of cabinet hinge. These are used in face frame cabinets where the door covers a 1/2″ of the face frame all the way around the cabinet door. 1/2″ overlay hinges are the most common overlay of cabinet hinge.
Do cabinet hinges come in different sizes?
The most common are ¼”, 3/8” and ½”. There is also a variable hinge available, but it attaches to the surface of the cabinet, not the edge of the cabinet opening as shown in the diagram.
Can you change cabinet hinges to hidden?
Quote from the video:
Quote from Youtube video: If you have a situation like ours where you're replacing existing hinges i think these work well if you're like doing new cabinets. And you have to like be precise about the position.
How do I know what cabinet hinges I need?
The construction of your cabinet – most notably, the overlay of the face frame and the cabinet door – determines which cabinet hinge you need. Similarly, where your drawer slides need to be mounted dictates what type of drawer slide you need.
How do I know what size hinge I need?
In general, you’ll want to use one hinge for every 30 inches of door height.
For example:
- Use two hinges for doors up to 60 inches tall.
- Use three hinges if the door is between 60 and 90 inches tall.
- For doors between 90 inches and 120 inches, use four hinges.
How are door hinges measured?
Know Your Way Around A Hinge: Hinges are measured from top to bottom and side to side. This bit is pretty straightforward. You’ll then need to be able to discern radius corners from square corners. A square corner has that sharp angle like a square.
How do you measure cabinet hinges overlay?
Quote from the video:
Quote from Youtube video: Step 1 with your door closed draw a small line on the frame of the cabinet at the edge of the door on the hinge side of the door step 2 open the door depending.
How thick should cabinet doors be?
3/4″ Thick Standard door thickness for butt joint doors. Strong and stable for most standard cabinet door sizes. 7/8″ Thick Standard door thickness for miter joint doors.
How do you measure and replace cabinet hinges?
Quote from the video:
Quote from Youtube video: You can just take your tape measure and. And just measure the overall cup depth and you can see there we're looking at that half inch.
How wide can a cabinet door be?
Standard width for a single or double door wall cabinet is generally available in widths from 9″ to 36″, we carry them in increments of 3″ (i.e., 9″, 12″, 15″).
Wall Cabinets Dimensions.
| Height | Width | Depth |
|---|---|---|
| 12, 15, 18, 24, 30, 36, and 42 INCHES | 12-26 INCHES | 12-24 INCHES |
What is the widest you should make a cabinet door?
My advice is to stay 20″ or less in width when possible. Center panels over 17″ width can expand over 1/4″ which will be greater than the spacing for space balls. This can cause the side rails to start to separate from the cross rails. Also the wider panels are much more likely to warp or split.
How much bigger should a cabinet door be than the opening?
Add space for door overlay: Cabinet doors for framed cabinets must be larger than the cabinet opening to look right and close properly. We refer to this as an “overlay”. The industry standard for most cabinet doors is a 1/2 inch overlay around the cabinet door.
What is a full overlay cabinet hinge?
A full overlay hinge is a type of European hinge with a completely straight arm which makes the offset much greater than partial overlay or inset hinge styles. This allows the door to completely overlay the cabinet box. Use these for full overlay doors.
What is the difference between half overlay and full overlay hinges?
Full overlay hinges are used for individual cabinets or cabinets on either end of a row of cabinets. Half or Partial overlay hinges are used for a pair of cabinet doors in the middle of a row of cabinets where two doors have their hinges mounted on opposite sides of a shared middle partition.
What is the difference between a half overlay hinge and a full overlay hinge?
Full overlay hinges are for individual cabinets or the cabinets on either end of a run of cabinets. Half overlay hinges are intended for pairs of doors in the middle of a run of cabinets, where two doors have their hinges mounted on opposite sides of a shared middle partition.
