How do you replace a shower drain in a concrete floor?

How to Replace a Shower Drain in a Concrete Slab

  1. Step 1: Remove Concrete Around Drain. …
  2. Step 2: Remove Drain Cover. …
  3. Step 3: Remove Old Drain. …
  4. Step 4: Prime and Cement New Drain. …
  5. Step 5: Install New Shower Drain Cover. …
  6. Step 6: Prepare to Add New Concrete. …
  7. Step 7: Fill Hole With New Concrete.

Can I replace my shower drain?

Use a special drain assembly to quickly and easily install a new drain from the top. Replace a shower drain without tearing open the ceiling below. Use a special drain assembly and install it from the top.

How much does it cost to replace a shower drain?

According to Homewyse, the drain itself costs somewhere in the ballpark of $50 to $70, but you may need to spend another $30 to $40 on additional supplies. If you pay a professional to do the installation for you, expect labor to cost $200 to $300 on top of the materials.

How do you fix a shower drain in the basement?

Fixing a Leaking Shower Drain Without Taking Out the Pan

  1. Remove the drain cover.
  2. Discard the compression gasket.
  3. Remove the shower drain body.
  4. Clean the rim of the drain.
  5. Install the new gasket.
  6. Screw in the new shower drain body and seal it with putty.
  7. Remove any excess putty from around the drain.

Can I use a basement floor drain for a shower?

Do Basement Floor Drains Work for Showers? If you have a traditional drain attached to an existing sewer line, you can use the basement floor drain for a shower. However, some experts do not recommend this as the basement floor drain cannot handle the constant and high-water flow.

How do I convert a shower drain to a floor drain?

First, cut the tiles and remove the existing floor drain. Remove the drain pipe and put a shower drainpipe inside. Place the shower drain and screw the drain cover. Finally, seal the shower drain to the floor and retile the area.

How do you fix a shower drain that won’t drain?

First, if you have metal pipes, pour boiling water down the drain. Then remove hair from the drain. If that doesn’t work, use a mixture of vinegar and baking soda. If the clog persists, use a plunger, plumber’s snake or chemical drain opener.

How do you remove an old shower drain?


  1. Remove drain cover with flat blade screwdriver.
  2. Remove the crown nut by unthreading it using needle nose pliers.
  3. Extract the compression seal exposing drain pipe and shower drain body.
  4. With mini hacksaw, make two vertical cuts approximately 1” apart through drain body.

What are the different types of shower drains?

The Two Main Types of Shower Drains

  • Point Drains.
  • Linear Drains.
  • Three-Piece Drain.
  • One-Piece Drain.
  • Multipiece Shower Drain.

How do I fix a leaky basement drain?

One way to seal a leak in a pipe is by applying epoxy over it.

  1. Verify that there isn’t any water in the pipe and if there is then dry it. This will help the epoxy stick and help it attach correctly to the pipe.
  2. Verify that you have enough epoxy to cover the entire area where the pipe is cracked.

How do I know if my shower drain is leaking?

The good thing about testing a shower drain for a leak is that it is very simple — just wipe the drain pipe to remove all moisture and then turn on the shower and run some water in the drain until you can see the leak. You can also use a bucket or hose to supply more water volume.

Why is my shower leaking downstairs?

1) The cover plate around the shower valve or tub spout may not of been sealed with caulk, causing the leak from water splashing off the body and going behind the cover plate and down the wall and into the ceiling below. 2) The pipe from the shower valve up to the shower head could be leaking.

Can hair in shower drain cause leaks?

Smaller shower drain blockages are usually caused by a build-up of soap scum, dirt, and hair. Long hair in particular can easily clog drains, and soap worsens the problem by causing hair to stick to the drain walls more easily than it otherwise would.

Can I claim on home insurance for leaking shower?

Under most circumstances, if a leaking shower is caused by a sudden burst in pipes or other disaster with a quick onset, you can claim it on your home insurance. If, however, the leaky shower is a result of a gradual issue in your plumbing, you’ll probably pay for the repairs out of your pocket.

Why does my basement flood when I shower?

There are 3 main reasons behind this irritating problem. The very first reason could be too much water in the drain. Clog in sewer lines also plays a role in this issue as well. Finally, damage to sewer lines can also be responsible for this issue too.

How much does it cost to unclog a basement drain?

Plumbers cost $75 to $550 to unclog a drain, depending on the hourly rates, accessibility, severity, and cause of blockage. Most plumbers offer flat rates on basic drain cleaning, while unclogging severe drains is billed at $45 to $150 per hour plus parts.
Plumber Cost To Unclog Drain.

National Average Cost $216
Average Range $100 to $275

Why is there poop in my basement?

What Causes a Sewage Backup? Clogs, buildups in pipes from grease, or improperly flushed items, such as paper towels or single-use wipes, are common causes of sewage backup. Damage to the sewer lines can also cause a sewage backup because it prevents water from flowing correctly.

Will Drano unclog sewer line?

Bust a Sewer Clog With Enzyme-Based Drain Cleaner

It’s hardly ever a good idea to put Drano or a similar product in the toilet because it contains sodium hydroxide, which generates heat and can damage the pipes.

What is the black stuff in my drain?

That black substance that keeps seeping into your sink or toilet is usually bacteria that’s clinging to waste in your drain lines. This bacteria tends to grow and spread over time, particularly because the matter that goes down these drains is organic in nature, providing a food source for the bacteria to live on.

How do you know if your main line is clogged?

Here are a few signs that it’s your main line that’s clogged.

  1. Multiple slow-running drains. If more than one drain is running slow, it’s probably not a coincidence, but an indication that one clog is causing issues for all of them. …
  2. Water backing up into other drains. …
  3. Gurgling sounds. …
  4. Sewage odors coming from the drains.