https://youtu.be/kQIJIhFnvgY
What are the parts of a bathroom faucet called?
- Cartridges & Stems.
- Aerators & Flow Restrictors.
- Washers & Washer Kits.
- Escutcheons & Flanges.
- O-Rings & O-Ring Kits.
- Caps & Index Buttons.
- Faucet Aerators.
- Faucet Hardware.
- Faucet Stems & Cartridges.
- Valve Trim.
- Faucet Handles.
- Diverters.
- Faucet Spouts & Kits.
- Body Sprays.
What is the bathtub nozzle called?
Tub Spout
Tub Spout — An output device through which water flows to fill a tub. The valve controls the flow. Two Handle Faucet — Two handle faucets feature separate handles to control hot and cold water temperature.
What are the parts of a faucet called?
Faucet Parts
What are the parts of a bath called?
What is this? Rim: The upper edge of the tub. Cold and hot water supply: There’s a dedicated pipe for both cold and hot water. Drain: The part in the tub where water drains and enters the drain pipe that removes water.
What is a faucet tailpiece?
The tailpiece, or sink tailpiece, is the straight section of pipe that connects to the bottom of the sink drain fitting. If the sink has a pop-up drain, the lever rod of the drain assembly connects to a port on the back of the tailpiece.
What are the parts of a faucet aerator?
Three major components of an aerator are: housing, insert and rubber washer. A faucet aerator can be classified on the basis of its flow rate and the type of water stream (aerated, non-aerated, spray) it produces. In general, standard-sized aerators are available with female (M22x1) or male threading (M24x1).
What is the shower valve called?
Pressure balancing valves, also called mechanical or anti-scald valves, are the most common types of shower valves. A pressure balancing valve is designed to rebalance the water pressure to keep the shower from becoming excessively hot.
What is the round thing in the bathtub?
That is the tub drain overflow plate, though it’s actually above the drain, not the faucet. (The opening in this plate leads to a tube that prevents the tub from overflowing by allowing water to run out even if the drain in the bottom of the tub is stopped.)
What is a shower spout?
A bath and shower diverter is a device that diverts the flow of water either toward the tub spout (i.e., to the bathtub) or toward the showerhead. This product is commonly found in bathtubs equipped with a showerhead, such as in residential bathrooms and private commercial restrooms found in hotels.
How do you replace a shower spout?
Quote from the video:
Quote from Youtube video: The copper to remove the old tub spout first loosen off the set screw this set screw uses a 5 32nd allen key once the set screw is loosened the tub spoke should slide.
How do you replace a shower diverter spout?
Quote from the video:
Quote from Youtube video: You don't want to take a razor blade. And you want to want to scrape that and break that seal off of the edge of the spout. Then what you're gonna want to do is come and look underneath the spout.
What is a shower diverter?
If you have a shower-tub combination in your bathroom, the shower diverter valve is what allows you to divert the water back and forth between the tub faucet and the showerhead. Though they are typically very simple devices, shower diverters may malfunction and need replacing once in a while.
What does a shower diverter look like?
Quote from the video:
Quote from Youtube video: Comes in from the left cold. Water from the right the two are mixed in the valve. And will either go up to the showerhead or down to a tub spout a diverter directs which way the water goes.
What is faucet diverter?
A faucet diverter is most often used to direct the flow of water from a bathtub spout to the shower head. The presence of a faucet diverter permits a bathtub to be used either for bathing or showering and eliminates the need for a separate shower stall.
How do you fix a bathtub diverter?
Quote from the video:
Quote from Youtube video: And pulling up on the diverter. Knob once that comes off all of the parts will come loose. So we'll take a look inside the tub spout in a little bit but first let's check out the washer.
How do you fix a stuck shower diverter valve?
Spray penetrating lubricant into the spout opening so it hits the diverter piece. Spray the penetrating lubricant around the post on the top of the water spout and wait five minutes or more before trying the diverter again. If this does not work, replace the spout.
