Place a downspout strap at the top where it meets the elbow. Secure one end of the strap to the siding with a zip screw and a cordless screwdriver with 1/4-inch socket attachment. Screw the fastener in slowly and release the trigger on the drill just before the screw head meets the vinyl siding.
How do you attach a downspout to the side of a house?
Quote from the video:
Quote from Youtube video: Basically all you do you can get them 1/4 inch diameter and then you pick up a quarter inch concrete bit and drill a hole that with this will fit in put the strap.
How do you secure downspouts?
Quote from the video:
Quote from Youtube video: That might spin a little bit hold it tight there you go push it right in keep pushing. There it goes perfect good pull it up okay.
What holds a downspout in place?
Aluminum downspouts direct water collected by gutters away from the house and towards the ground. Downspouts can be attached to houses with rivets or metal screws. In the case of installing a downspout onto vinyl siding, a metal screw is used to secure it to the house.
How do you anchor a downspout?
Use Concrete Screws to Attach Downspout to Gutter
Place the clip around your gutter. Align the holes in the clip with the pilot holes in the brick. Screw a concrete screw into each hole. Once the screws are secure and the clip is snug against the gutter and wall, your job is done.
How do I attach a downspout to vinyl siding?
Place a downspout strap at the top where it meets the elbow. Secure one end of the strap to the siding with a zip screw and a cordless screwdriver with 1/4-inch socket attachment. Screw the fastener in slowly and release the trigger on the drill just before the screw head meets the vinyl siding.
What screws to use for downspout straps?
Quote from the video:
Quote from Youtube video: These are half inch zips they have the hex. End uh it's the same exact. As these longer inch and a half screws. They come in i mean a plethora of colors.
How do I stop my downspouts from blowing off?
How Do You Stop Your Downspouts From Blowing Off?
- Mark the left and right sides of your downspout path along your house.
- Mark locations for downspout straps at the top and bottom of the downspout, as well as every 10 feet (3 meters) in between.
- Pre-drill 2 anchor holes in your siding for each downspout strap.
How do you install a downpipe clip?
Quote from the video:
Quote from Youtube video: Down pipe clips are the fittings that are used to secure a down pipe back to the wall. And we do that using 5 mil by 25 mil screws on the right round head or countersunk.
How do you crimp your elbow downspout?
Quote from the video:
Quote from Youtube video: I just grabbed the downspout. Now because it's missing one smaller end and crimp it in you want to pinch in basically on the two smaller sides you want to pinch it in like.
How do you attach downspouts to a wall?
Downspout Installation Instructions
- #1. Drill A Hole Directly Into The Brick. Using a 3/16 inch steel carbide tip masonry drill bit drill two holes directly into the brick. …
- #2. Fasten A Downspout Strap To The Wall Using Tapcons. …
- #3. Fasten The Downspout To The Downspout Straps.
How do you install gutter screws?
Quote from the video:
Quote from Youtube video: To get it started basically to be able to go through the gutter right there. And then just screw it right through it with the cordless drill. Once you get the new hole started on an angle. That'll.
How do you use gutter straps?
Quote from the video:
Quote from Youtube video: Simply take the whole head and hang your attachment. Slide it underneath each shingle.
How do you install vinyl gutter hangers?
Quote from the video:
Quote from Youtube video: So right here I have the hangers that we'll be mounting the gutter to the wall. You want to make sure that you slide these onto the gutter before you put any corners.
What is a gutter clip?
Quote from the video:
Quote from Youtube video: If you've got a gutter that's hanging. Off have a look closely it might just be that you need to re clip that gutter if there's leaf and debris if the gutter has a huge downpour.
Where should gutter hangers be placed?
As a rule of thumb, gutter hangers should be spaced a maximum of three feet away from each other. If you live in a cold climate, your contractor may recommend gutter hanger spacing of two feet apart to account for the additional weight from snow and ice.
Do gutter hangers go through drip edge?
Quote from the video:
Quote from Youtube video: Just like this. Now as you can see when the water comes off of this roof. And hits this drip edge it's now going to be directed into the gutter. If you don't bend that drip edge out.
How far apart do you put rain gutter hangers?
If you live in a predominantly warm place with occasional rainfall, your gutter hangers should be close to the center of the gutter system. The spacing should be no more than 36 inches apart from the center. For wet climates, gutters should have a maximum distance of 18 inches between them.
