How do I protect my new wood fence?

In five to eight years, the fence may start to lean, but it should last 10 to 15 years overall. To keep the wood from rotting, apply a wood preservative to seal it. “It’s like wax on a car,” Holt says. “It helps protect it from the elements, from water, from sprinklers.”

Can you stain a brand new fence?





New fences should not be stained right away. The type of wood used in your new fence will influence when, approximately, you should stain it. Wet wood won’t allow the stain to properly penetrate the wood grain and protect the wood.

How long should you wait before staining a new fence?

between 1 and 6 months

Consider the type of wood, and then wait the proper amount of time (usually anywhere between 1 and 6 months) before staining or sealing your fence. This will allow it to sufficiently weather and to dry or cure.

Should I seal my new fence?

A good rule of thumb is to wait four to eight weeks after the fence has been installed before staining and sealing it. During this period of time, the moisture content of the wood will decrease. If the wood was pressure-treated you will probably have to wait longer.

Should I stain fence before or after assembly?





Most installers will tell you to wait a period of time after installation to apply stain or paint. This is true, especially if you install with pressure treated pine fence posts. Just like a deck, it needs to dry before applying a finish.

How many coats of stain do I need for a fence?

Solid-color stains are identical to regular paint in most situations, and only one coat is needed to protect your fence. Two coats are also required for semi-transparent penetrating stains, with the second coat being applied approximately an hour after the first coat.

How do you stain a weathered fence?

Youtube quote:And then use a bristle brush give it a good rub in basically it's to clean the fence once that step is done you host down give it a good rinse. You can use a pressure washer.

Do I need to stain both sides of my fence?

Your fence you are required to maintain it. Around here it has to be fully on your property by a few inches unless the neighbor gives permission. You are also supposed to put the better side out. Unless they have gone in on this fence with you, you should stain both sides.

Is cedar better than pine for a fence?



Cedar is generally regarded as the stronger and more durable of these two woods. It does not need any special treatment and stands up well to the elements, with a low risk of warping and shrinking. Pine, on the other hand, is more at risk of buckling, warping, and shrinking.

Should I pressure wash my fence before staining?

Should You Power Wash Before Fence Staining? More often than not, it is not a good idea to power wash a fence before staining it. Power washers can force the mold and mildew (the greying color of the fence) deeper into the wood pickets. This causes the wood to deteriorate quicker.