How do you transition laminate flooring to bottom of stairs?

Quote from the video:
Quote from Youtube video: So like i said before i just cut a few of the quarter inch strips. And then attached a three quarter inch slab in front of it and that gave me my one inch kick out that i. Needed.

How do you fill the gap between stair tread and riser?





Run a heavy bead of the silicone along the gap to fill it, and then use a wet fingertip to smooth it out if necessary. It’s the fastest way to fill minor gaps, and if you’re not happy with the way it looks, you can always install molding over it.

Should risers be on top of treads?

When installing stairs, install the riser first, and then the tread. Start at the bottom of the stairs and work your way up, alternating risers and treads. The back of each tread will sit flush against the riser. Treads and risers fasten with construction adhesive to the subfloor.

How do you finish trimming stairs?

Quote from the video:
Quote from Youtube video: This way on each side do that same cut five degree back bevel to try and get a perfect fit within a thirty second to a sixteenth on each side.

How do you transition laminate flooring?

Quote from the video:
Quote from Youtube video: This is going to cover this lip right here is going to cover. The laminate now you don't want it to be tight like that you want to have somewhat of a gap there just like you do along the wall.

How do you fill gaps in stairs?





Quote from the video:
Quote from Youtube video: And it's super easy to use get yourself just a simple caulk gun there are about ten ten twelve dollars for a basic cove gun. The caulk runs around twelve. Dollars a to put it in there cut the end off.

What is a stair skirt?

A stair skirtboard is a continuous piece of trim or molding for the sides of your stairs to give them a finished look. There are two kinds of skirt boards for stairs. The first type is the one between the stairs and the wall adjoining the stairs.

Should you caulk stair risers?

3. The final finishing step to this process is to go back and caulk all around the stairs. Caulking truly gives a project like this a finished, professional look to it and is a necessary step if you want to be sure your stairs look nice.

What is stair spandrel?

Spandrel: The triangular space underneath a staircase (when there is not another flight underneath).

What is the trim on stairs called?



A stair skirt or baseboard is the trim that runs along the bottom of the wall beside the steps. Often, it is made from the same baseboard used throughout the home, but it can also have a different appearance entirely. Baseboard trim can be cut with mitered corners and follow the angles of each tread and riser.

Do you put baseboards on stairs?

You do not need a skirt board on stairs. If you don’t have baseboards in your house, then you don’t need skirting for your stairs. You might want stair skirting if you have baseboards in your house, as skirting will serve to connect, esthetically, baseboards on either ends of the step.

What is shoe molding on stairs?

Paired with baseboard and stained or painted to match your trim, shoe molding (also known as “base shoe”) is a small, thin strip of molding that gives your room a finished look. Shoe molding adds a decorative touch while covering any gaps that might lie between the bottom of baseboard and the floor.

Should you put shoe molding on stairs?



You should not put a moulding at the back of a tread as it reduces the effective run of the tread, and a heel catch on the way down can put you on your kiester. Mouldings go up under the nosing. I just added new stair treads and risers to replace the carpet on our stairs.

Should baseboards match floor or trim?

Your home will be the one that’s setting the table for wood flooring. It’s a common myth among clients that your trim, baseboards, and other surfaces need to match the color of the flooring. However, you can also paint every section of the trim in a different color so it looks like the hardwood floors.

What can I use instead of shoe molding?

Quarter round is another moulding style typically paired with baseboards to cover up gaps and imperfections between the base and the floor. As such, it essentially has the same purpose as shoe moulding.

Is quarter round molding necessary?

One of the most common questions people ask is if they really need the base shoe, or if it’s just an add on. The answer is a simple yes. Without it, there is typically a gap between the trim and flooring, which is not only unattractive but makes it extremely easy for dirt and debris to build up under the base trim.

Which is better shoe molding or quarter round?



Shoe molding, also spelled “moulding,” is smaller and thinner than quarter round, and can have a decorative profile. Quarter round is, literally, a quarter circle. The thin profile of shoe molding allows it to bend into place easily, where the stout quarter round does a better job covering large gaps.

What is base shoe molding?

Shoe molding is much the same as quarter round, having the same 90° angle on the backside but instead of being a perfect quarter radius, its profile is a bit more squat. The main use for shoe molding is to run along the intersection of the baseboard and floor.

Do you need shoe molding on wood floors?

Using shoe molding gives the floor installer more latitude in their end cuts and also allows you to hide the expansion gaps between the wall and the floor. Due to the small and flexible nature of the shoe molding, it is able to expand and contract along with the floor.

Should baseboards touch the floor?

Baseboards should only touch the floor if you have no plans to carpet your floors and if you’ve already finished installing your other flooring. If you have yet to install the rest of your floor, carpet or otherwise, you’ll need to take into account the height of the installed flooring.