You can make a basement in an area where water table is high but it will be expensive, First the excavation for basement especially the sides of the pit should be protected with proper shoring(sheet piling / wooden planks) to prevent mudsliding, Second the basement has to be constructed as a water tank to prevent water …

Can you build below the water table?

Foundation footings and basement slabs should sit above the water table so that groundwater will not put pressure on the foundation or cause a dampness problem. On a site with a high water table, you may prefer to build a shallow foundation, or bring in fill to raise the grade.

Can you have a basement next to a lake?

Having a home near water usually means a high water table. Many things determine your actual water table such as soil type, drainage, and of course distance from the body of water. The water table will influence your foundation design and a full basement might not be an option.

What depth is considered a high water table?

A high water table area is defined as any area where the water table is within 1.8 metres, or 6 feet off the ground surface during the frost period up until the end of August or within 2.4 metres or 8 feet of the ground surface during the rest of the year.

How does water table affect bearing capacity?

(1) When the water table is at the ground surface, the bearing capacity reduces by 51.63%. (2) When the water table is at the bottom of the footing, the bearing capacity reduces by 20.92%. (3) When the water table is at 1m below the footing, the bearing capacity reduces by 10.46%.

Can you have a basement with a high water table?

A high water table will drive up basement moisture levels significantly. And this will make the basement feel damp or muggy. When precipitation is high, groundwater may collect around your foundation walls and push against them. This might cause your walls to bow inward or crack.

Can you waterproof a basement with a high water table?

Quote from the video:
Quote from Youtube video: Right now we're pumping in concrete to raise the floor of this basement with a drainage system underneath. It what a table very high only two inches under the original floor. So the only thing to do

What happens if water table above base of footing?

Similarly, if soil gets submerged its ability to support the load coming over its unit area is reduced when the water table is above the base of the footing, the submerged weight is used for the soil below the water table for computing the surcharge.

What happens if water table about the base of footing?

The position of ground water has a significant effect on the bearing capacity of soil. Presence of water table at a depth less than the width of the foundation from the foundation bottom will reduce the bearing capacity of the soil.

How does groundwater table affect foundations?

Lowering of the groundwater table can cause the soil to consolidate, which induces settlement. With softer, more compressible soils, settlements can become large. Many of the cases of damage reported are due to large scale land-surface subsidence induced by ground water abstraction.

How do I lower my groundwater table?

To guarantee a dry excavation pit, the groundwater table of the inflowing water can be lowered by continuous pumping with the aid of a dewatering system. Depending on the permeability of the soil, a gradient of varying degrees is created between the lowered and the groundwater level at rest during dewatering.

How does groundwater affect construction?

The effect of underground water observed on buildings are water saturated wall, deep cracks in walls, discoloration of walls, wall plastering and paint film flaked off.