What should KitchenAid freezer temp be?

0 degrees Fahrenheit

Controls are preset at the factory for normal household usage. If refrigerator is being used accordingly, ensure that control is still set at the recommended factory settings; 37 degrees Fahrenheit for the refrigerator and 0 degrees Fahrenheit for the freezer. Refer to the Owner’s Manual for settings.

How do you reset the temperature on a KitchenAid refrigerator?

How Do I Reset My KitchenAid Refrigerator?

  1. Power off your appliance by unplugging it or turning off the circuit breaker.
  2. Wait 5-10 minutes, and then power your refrigerator back on.
  3. Make sure the cooling function on your fridge is turned on.
  4. Test your KitchenAid’s control board, and if everything’s okay, you’re all set!

Why is my KitchenAid freezer not cold enough?

If the condenser coils are dirty or have not been cleaned in a while, clean them. The evaporator fan motor draws air over the evaporator coils and circulates it throughout the freezer. If the evaporator fan motor is not working, the freezer will not cool.

Why is my KitchenAid refrigerator freezing everything?

If vents are blocked, airflow will decrease. Temperature and moisture issues may arise due to blocked vents. Items placed directly in the air flow from the freezer compartment to the refrigerator compartment may freeze. Do not place temperature sensitive items, such as eggs and liquids, in these areas.

What Setting Should you have your freezer on?


The recommended freezer temperature to keep your food safe is at or below 0°F (-18°C), but your freezer may need to be set higher or lower depending on its environment and other factors. The typical freezer factory setting on Whirlpool® refrigerators is a great starting point at the recommended 0°F (-18°C).

What should my KitchenAid refrigerator be set at?


As a rule of thumb, 37°F is the correct temperature to store most foods safely. Keep in mind that temperature settings may need to be adjusted depending on varying environments and humidity levels, such as refrigerators in basements or garages.

What temperature should my refrigerator and freezer be set at?

Is there a “correct” temperature for refrigerators and freezers? Yep: A fridge temperature of 37° F will keep fresh food good for as long as possible—with no ice crystals on lettuce or bacteria breeding in raw meats. As for the freezer, a temperature of 0° F will keep foods thoroughly frozen.

How do I reset my KitchenAid refrigerator freezer?

Reset the refrigerator

  1. Power unit down by turning off the circuit breaker(s) or unpluging the product for 5 – 10 minutes.
  2. Power unit up by turning on the circuit breaker(s) or plugging the product back in.
  3. Ensure the cooling function is turned on.
  4. Test the control panel functionality.

How do I set the temperature on my refrigerator?

Quote from the video:
Quote from Youtube video: The target temperature for your top mount refrigerator at the factory setting is the midpoint on your temperature controls. You can adjust these temperatures by turning the control knob.

Why does my KitchenAid freezer keep freezing up?

Frost is likely to build if the door is left open for a long period of time. This allows excess humidity to enter the refrigerator and freezer sections. Make sure the door is closing completely and is not blocked by something between the door gasket and cabinet.

Why is my fridge suddenly freezing everything?

Quick Answer: If your refrigerator is “all of a sudden” freezing your food and drinks, the temperature setting for the fridge has been inadvertently set TOO LOW or TOO COLD. Try setting the refrigerator section temp to medium or the number 5.

Where is the thermostat on a KitchenAid refrigerator?

Quote from the video:
Quote from Youtube video: Here on the right is the freezer thermistor. Inside this cover insert the flat blade screwdriver. Into this slot and open the locking tab to release the cover. Remove the thermistor from the cover.

What is normal freezer temperature?

0° F

Keep your appliances at the proper temperatures.

The freezer temperature should be 0° F (-18° C). Check temperatures periodically. Appliance thermometers are the best way of knowing these temperatures and are generally inexpensive.

What temperature is too cold for a freezer?


The U.S. Food and Drug Administration (FDA) recommends that you keep your refrigerator temperature at or below 40°F and your freezer temperature at or below 0°F.

How do I check the temperature of my freezer?

Quote from the video:
Quote from Youtube video: With a temp with a temperature probe of some sort in between those two bags. Upon removing temperature probe immediately.

How do I know if my freezer is cold enough?

Instead, simply place the thermometer in the freezer between two pieces of already frozen food in the center of the freezer cabinet. You can also place the thermometer in ice cream. Close the door and wait at least 12 hours to allow the thermometer to get a reading.

How do I make my freezer colder?

The first is bumping the setting and the second is blocking cold airflow from the freezer.

  1. Adjust the Temperature Setting. …
  2. Clear the Compartment Vents. …
  3. Align the Door. …
  4. Clean the Gasket Seal. …
  5. Replace the Circulation Fan. …
  6. Clean the Coils. …
  7. Replace the Thermistor. …
  8. Fix the Defrost Assembly.

Is 10 degrees cold enough for a freezer?

Is 10 Degrees Cold Enough For A Freezer? Generally, it’s better to keep your freezer at or below zero degrees Fahrenheit. Although ten degrees won’t cause your food to spoil, it will take longer to freeze it. And that isn’t good for its shelf life.