You can choose from a matte or gloss finish. If you plan to prep food on your butcher block countertops, look for a food-safe sealer. Using a foam brush, apply sealer over wood surfaces and let dry. Repeat for a final coat.

What is the best finish for butcher block?

Do you want to use the butcher block countertop as a cutting surface? Going with a wax and oil finish is the way to go. If it’s decorative, all you need is polyurethane.

How do you finish a raw butcher block?

Quote from the video:
Quote from Youtube video: Just. Like you would a floor. You apply it and you go with the wood grain. And and it flows out real nice you probably put two coats of that on for a butcher block countertop.

What do you seal butcher block with?

There are two types of sealants to use on butcher block countertops: oil and film finish. And, there are two types of oil sealants: evaporating and polymerizing. The best option for your kitchen depends on what you intend to do on the surface.

How do you finish butcher block island?

To seal butcher block with mineral oil, you simply apply the mineral oil generously, let it soak in, and wipe off the excess. You need to do it fairly regularly at first but then only about once a month after you’ve gotten through several applications.

Can you polyurethane a butcher block?

Follow these steps to easily waterproof your butcher block countertops with Polyurethane: Sand the counters until they’re completely clean. Vacuum any dirt off the surface and apply a natural stain. Apply a thick coat of Polyurethane, a liquid coating that dries into a plastic.

Is tung oil good for butcher block?

Pure tung oil is a good choice for a food safe wood finish for your butcher block countertop or kitchen island. It’s easy to apply, nontoxic and leaves a beautiful matte finish that fits into almost any home style.

Can you permanently seal butcher block countertops?

There are a variety of options for permanently sealing and waterproofing butcher block wood countertops, commonly used in kitchens. When considering sealers, there are two types available: penetrating and topical.

Do you need to seal bottom of butcher block?

You will need to finish all surfaces (top, bottom and sides) of your unfinished butcher block or wide plank top with a commercial grade polyurethane or Waterlox finish. Follow manufacturer’s instructions on the polyurethane or Waterlox for finishing coats (usually three or four coats).

Is Rubio monocoat good for butcher block countertops?

The Rubio Monocoat sealer is our recommended sealer for wood countertops (with or without sinks) because you can cut on the surface, it’s easy to repair and provides a high level of protection.

Which polyurethane is best for butcher block?

For kitchen coutertops with sinks but you want a natural butcher block look use Rubio Monocoat 2C oil. Nothing else is as good or easy. For furniture style tops that a sheen is desired use Zar brand INTERIOR 100% oil poly. It flows out better than any other on the market.

Should you stain a butcher block?

Butcher block is a popular type of wooden kitchen counter. If you’re having butcher block counters installed, you’ll need to stain the wood to protect it and enhance it appearance. Also stain your butcher block if you’ve had your counters for several years and the current finish is looking worn or faded.

Whats the difference between shellac and polyurethane?

The difference between shellac and polyurethane is that Shellac is a quick-drying natural resin secreted by the female lac bug and adds a warm tone to wood. Polyurethane wood finish is an artificial resin available in both oil and water-based forms. Shellac dries in 30 minutes while polyurethane takes 2-6 hours to dry.

What is the most durable finish for wood?

In fact, oil-based varnish is the most durable finish that can be easily applied by the average woodworker. Varnish surpasses most other finishes in its resistance to water, heat, solvents and other chemicals.

Should I use lacquer or polyurethane?

Despite being available in variances, polyurethane is more durable. It is thick and leaves a strong coating. Lacquer is thin and penetrates the wood surface. It is also durable but susceptible to scratches and discoloration after some time.

What are the disadvantages of shellac?


  • Shellac is not very durable and is prone to damage.
  • This finish is not heat-resistant. As a precaution, avoid placing hot pans or objects on it.
  • Another drawback is that shellac is not water-resistant, hence unsuitable for areas such as kitchens or bathrooms.

Which is better varnish or shellac?

Due to the fact that it cures and has a harder coating, varnish provides greater protection. This is the reason it is used for exterior use, floors, interior woodwork and furniture that is used a lot or exposed to dust, wind, and pollen etc. Shellac, however, is more suitable for cabinet, antiques and table tops.

Do you need to seal shellac?

The problem with shellac, and part of the reason why it has fallen out of fashion as a modern wood finish, is that when used alone it is easily damaged by water and alcohol. To produce a lasting shellac finish, a transparent sealant must be put on top.