If you have access do it from the attic and put a cover on it not an old work box. If you don’t have access it has to be accessible so putting it under the fixture would be a code violation. Accessible can be a cover designed to be removed without affecting the finish.
Can you cover junction boxes?
Junction box covers must remain accessible; they cannot be covered with drywall or other surface material. A junction box is most often used where an electrical circuit branches off in two or more directions from a location where an outlet or fixture is not practical.
Does every light fixture need a junction box?
Often known as a junction box, this metal or plastic box includes a cover to protect the wiring within and protect you from the wiring. This rule is demonstrated nicely by wall switches, receptacles, and standard light fixtures, all of which require a junction box to mount the device and house the wiring connections.
Can you cover a junction box in a ceiling?
Youtube quote:Now after removing the piece of cardboard that says made in USA on it you're going to be greeted by a couple of screws. And a plastic mounting bracket. Next you can go ahead and start your screws.
How do you cover a junction box?
Your best bet is to either remove the box all together or just put a cover plate on it. Your other option is to run a new circuit to the new box and de-energize the circuit to the old box and mark the source wires as “NOT IN USE” at your panel in which case I believe you could cover it over.
Why can’t you cover a junction box?
Electrical wires run behind the walls and through the ceiling of your home, meeting at junction boxes. It is a safety hazard to completely bury a junction box in a wall.
Does a junction box need a cover?
A: It is important to cover an electrical junction box no matter where it’s located. When one or more electrical wires are twisted together, the connection causes resistance to the flow of electricity, which in turn creates heat.
Can I mount a light without a junction box?
You can’t install a light fixture without a junction box, but the fact that there’s no box at the spot where you want to install the light doesn’t mean you can’t install the light.
What is the difference between a junction box and a terminal box?
Terminal boxes are used for particular connections when there is no room for future extension or where the expansion of connections is not required in the future. On the other hand, a junction box has a small footprint and lots of working area. New connections might also be planned for future development.
Does a junction box have to be attached to a stud?
They don’t need to be fastened to a stud, so you can install them anywhere.
Can you hide a junction box behind drywall?
Registered. Yes any concealed box is a code violation. All splices must be accessable. Now practically speaking if the splice is made properly with wire nuts and the cables properly clamped in the box, you can cover it without concern.
How do I hide an old electrical box?
As long as there are no wires inside the box, you can cover it with drywall. If the box is still acting as a junction box, however, and wires are joined inside it, the electrical code mandates a removable cover. Covers come in plastic or metal, and you attach them with machine screws.
How do you cover a switch box?
Youtube quote:And we're using one by threes you can also use fence boards. And you can even cut them in half if you want them a little bit smaller. But this will ensure that they're water resistant rot resistant.
Can I cover an electrical box with drywall?
Per their requirements, electrical boxes must be covered with matching electrical box covers. You can’t cover them with drywall, paneling or other wall coverings. The box also needs to have enough space for the conductors inside.
Can I drywall over an old light fixture?
Permanent Covering
If you are not going to replace your old light fixture, cover the hole with a piece of drywall for a permanent fix. Use the same thickness of drywall as the surrounding ceiling, and cut the patch piece as close to the size of the hole as possible.
What can I use to cover a light fixture?
Ceiling medallions are large decorative disks that sometimes adorn the ceiling around a fan or light fixture, and you can buy one that doesn’t have an opening for a fixture. You typically glue one of these to the drywall, so you can use it to cover a hole whether or not you remove the electrical box.
How do you fill the gap between light fixture and ceiling?
Youtube quote:So go ahead get your wires ready and make sure before you do any left fork you shut the power off at the electrical box so we're going to take the trim for the light.
How do you cap off a light fixture?
Youtube quote:For this job you will need some wire nuts and electrical tape so here's a standard electrical box this sits in between two studs.
Is it OK to cap live wires?
It can be helpful to cap wires when renovating your house or making electrical repairs. These wires can cause electric shock if they are exposed. The cap should fit the strands in the wire gauge if there are multiple wires. The caps must grip the wires firms so that it does not fall off after being screwed in place.
How do you safely cap a wire?
Youtube quote:So if you take a look at this electric at these electrical wires right here you'll notice that there are three wires. There is a white one which is the neutral a black one which is the hot wire or the
