Refinishing engineered hardwood floors is ideal if your wear layer is thick. You may be able to refinish your flooring up to three times if the wear layer measures at least three millimeters thick. A wear layer that’s less than two-millimeter thick can sustain damage if you refinish it more than once.

Can you change the color of engineered wood floors?

When it comes to how to change the color of your engineered hardwood floor, sanding and refinishing is by far the most popular method. Sanding removes the existing finish, creating a fresh start for your new color. Take care to sand only engineered hardwood floors that have a thick enough veneer layer.

How do you make engineered hardwood floors look new again?

How to Clean Engineered Hardwood Floors

  1. Clear debris. Clean and clear the floor of all debris, dirt and dust using a vacuum cleaner, soft bristle broom, dust mop or microfiber mop.
  2. Wet your mop. Lightly wet your mop pad or wipe with clean water.
  3. Apply Simple Green Multi-Surface Floor Care. …
  4. Mop up in sections. …
  5. Air dry.

Can you refinish pre finished engineered hardwood?

Pre-finished hardwoods can be sanded and refinished. We do it all the time! Most of the pre-finished flooring has a bevel in between each board. That bevel can be sanded flat, if you choose.

Can you sand and stain engineered hardwood floors?

As I mentioned above, yes you can refinish engineered hardwood flooring. But it all depends on the thickness of the top layer. Typical engineered hardwoods have a wear layer thickness that ranges from 3mm to 7mm. The sanding process in refinishing your flooring will take off 1mm.

What are the disadvantages of engineered wood flooring?

10 Major Disadvantages of Installing Engineered Wood Flooring

  • Engineered Hardwood Can Be Pricey. …
  • A Low-Quality Core. …
  • There’s a Danger of Fading. …
  • You Need to Let the Wood Acclimate. …
  • Wooden Floors Require Specific Care. …
  • Engineered Hardwood Is Susceptible to Water Damage and Moisture.

How many times can you refinish engineered hardwood?

Refinishing engineered hardwood floors is ideal if your wear layer is thick. You may be able to refinish your flooring up to three times if the wear layer measures at least three millimeters thick. A wear layer that’s less than two-millimeter thick can sustain damage if you refinish it more than once.

Can engineered hardwood be buffed?

For shallow scratches, you can gently buff out the damage with fine-grit sandpaper or steel wool. Remember that the veneer on engineered hardwood flooring is much thinner than solid hardwood. You should only try to buff out scratches if they are only in the wood veneer and don’t penetrate the wood beneath.

Can you put polyurethane over engineered wood flooring?

Don’t apply other coats of stain / polyurethane finishes on already finished engineered hardwood flooring. When cleaning your new hardwood flooring, ensure that you don’t use any wax-based cleaners or harsh detergents that will dull the finish of your flooring.

Can you steam clean engineered wood floors?

Don’t use a steam cleaner on your floor as this will direct too much moisture into the layers of engineered flooring, leading them to separate. Avoid scratches by steering clear of scouring pads and steel wool. If your floor has been lacquered or oiled, there are more restrictions on what cleaning products may be used.

How do you fix faded engineered hardwood floors?

Quote from the video:
Quote from Youtube video: And not a polyurethane water-based urethane refresher just like this you're going to take your water-based urethane refresher squirt it on the dull area. Like.

How do you refinish engineered hardwood floors without sanding?

3 Approaches to Refinishing Hardwood Floors Without Sanding

  1. Use a store-bought chemical abrasion kit.
  2. Buff and recoat floors with polyurethane.
  3. Use a revitalizer.

Can you screen and recoat engineered hardwood floors?

Screening is often called buffing, since the screening is done with a buffer. Screening both smooths the floors a bit, and the abrasive action allows the polyurethane to adhere to the surface better. The screen and recoat process can restore the glow of the floors and give them a refreshed look.

Do engineered hardwood floors need to be sealed?

Does Engineered Hardwood Need to be Sealed? Most engineered hardwood often comes pre-finished and does not need to be sealed. However, if you would like to add an extra layer of protection from water leaks and spills, you can add a seal to engineered wood. Sealing your floor will keep the floors intact for longer.

How do you protect engineered hardwood floors?

Protect your engineered floors from UV damage by pulling drapes or blinds during peak sunlight hours to shield your floors from direct sunlight. Place all houseplants and furniture on soft coasters or felt pads to avoid nicks and scratches.

What does it mean to screen a floor?

What Is Screening Hardwood Floors? Screening is a process that takes off the top layer of polyurethane but doesn’t remove any wood. This relatively inexpensive technique gives you the option of doing the work yourself with little risk and saves you the cleanup and hassle associated with floor sanding.

What is the most popular finish for hardwood floors?


The satin sheen is the most popular finish for hardwood floors. This hardwood floor sheen has about 40% luster and is easy to keep clean. This level of sheen disperses light and doesn’t show all of the imperfections or dirt.

Can you recoat hardwood floors?

Screening and recoating are performed usually to remove dull and light scratches from the surface of hardwood floors. This is not to be confused with sanding the wood, only the old protective layer is removed. Recoating involves recoating the wood with a new coat of polyurethane, which can give it more protection.

How much does it cost to recoat and screen hardwood floors?

A professional screen and recoat process will cost anywhere from $1.50 to $2 per square foot. The process is less expensive than a full refinishing job, or restoration, which involves sanding, removing scuffs, and refinishing a floor.

Is it cheaper to refinish or replace hardwood floors?

Refinishing hardwood floors is more cost-effective than replacing them. On average, it costs about $2,000 to $7,000 to replace hardwood flooring (two to three times more than to refinish).

How much does it cost to refinish 500 square feet of hardwood floors?

Cost per square foot to refinish hardwood floors:

Flooring square footage Average cost
100 – 250 sq. ft. $600
251 – 500 sq. ft. $750
501 – 750 sq. ft. $1,601
751 – 1000 sq. ft. $2,100