How much clearance on either side of toilet?

Toilets and Bidets
Most codes require at least 15 inches (measured from the center of the toilet) from any side wall or obstruction and not closer than 30 inches center to center to any other sanitary fixture. (The NKBA actually recommends 32 inches.)

How much leg room do you need for a toilet?





The International Residential Code (IRC) requires that a room housing only a toilet needs to have, at minimum, 30-inch by 60-inch dimensions. This ensures at least 15 inches from the center of the toilet to each sidewall and that a minimum of 30 inches of legroom in front of this fixture.

How close can shower be to toilet?

Plan a clear floor space of at least 30 inches from the front edge of all fixtures (lavatory, toilet, bidet, tub, and shower) to any opposite bath fixture, wall, or obstacle.

How much space do you need around a toilet NZ?

In an open bathroom, allow a width of at least 750mm (although 900mm is preferred!) for the toilet to reside in to give the user enough space to sit comfortably without their elbows touching the walls. A length of between 1200 and 1500mm is usually sufficient.

What is the minimum distance from toilet to wall?

Standard Toilet Placement
The minimum distance between the toilet and a finished wall on either side is 15 inches. This is measured from the toilet’s centerline, not from the outside edge. The plumber determines the actual distance when he sets the toilet flange in the floor.

What does rough-in mean for toilets?





What is a Toilet Rough-In? The rough-in size of a toilet is the distance between the bare wall and the center of the toilet drainpipe, also known as the toilet flange.

What is the smallest space you can fit a toilet?

When designing a toilet compartment, you must provide a floor space that is 30 inches wide and 60 inches long.

What are the minimum dimensions for a toilet?

The International Residential Code (IRC) sets the required minimum dimensions of a toilet room at 30 inches by 60 inches. However, for increased comfort and accessibility, the National Kitchen and Bath Association suggests a minimum of 36 inches by 66 inches.

Which is better 1 or 2 piece toilet?

One piece toilets are typically heavier and easier to clean, and there’s less space for bacteria to grow. Because two piece toilets feature a detachable tank, they’re more customizable for preferred styles and heights. Both styles can include bells and whistles like bidet attachments or low-flow energy saving.

Does toilet have to be against wall?



There is no hard-fast rule about whether a toilet should touch the wall, as it is a matter of personal preference. Some people are okay with a toilet tank’s top touching the back wall, while others desire a minimum of one inch of space between the commode and the back wall.

How close to wall can toilet be UK?

The toilet and bidets must have a minimum space of 70cm in width and 120cm in length. If they are next to a wall, the minimum free space should be 20cm, and if there is an element on their side, they should not be placed less than 15cm away for greater usability.

How do you measure a toilet setback?

Measure from the wall behind the toilet to the center of one of the closet bolts (which hold the toilet down). If the toilet has four closet bolts, measure to the center of one of the rear ones. Then measure from the center of the mounting holes to the back of the new toilet you’re considering.

What is setback on a toilet?



The distance between the walls and the toilet is commonly referred to as setback. A minimum setback of 18 inches is necessary to maximize the use of the fixture. Position the edge of a tape measure against the wall located behind the toilet, and mark a distance 18 inches away from the wall on the bathroom floor.

How far can a toilet be from a vent stack?

6 feet

According to the UPC, the distance between your trap and the vent should be no more than 6 feet. In other words, for the vent to work properly, it needs to feed into the drain line within 6 feet of the trapways that connect to it.

Are all toilets the same distance from the wall?

Fifteen inches is the minimum distance from the toilet flange to any sidewall or nearby fixture. You can add more space if you want, but 15” is the very minimum. This means the toilet flange should be at least 15” from the vanity, the shower, the tub, and both the back and side walls.

Why is my toilet so far from the wall?



That means your flange was set at a distance further from the wall than even the 13″ you measured. A 14″ toilet might work, but a simpler and much cheaper fix would be to install an offset toilet flange.

What is the footprint of a toilet?

A toilet “footprint” is basically the measurement or size of where the bottom of the toilet pedestal meets the floor.