Can Your Polyurethane One Room at a Time? Much like the refinish, it’s best to polyurethane your hardwood floors simultaneously. It ensures there is proper continuity between rooms. That said, if you do choose to apply it room by room, the results don’t impede flow anywhere near as much as refinishing room by room.

Can I refinish my hardwood floors one room at a time?

For people who are already living in their homes and needing to shuffle furniture from one room to another to get the floors done, refinishing the entire home at once isn’t possible. So can you refinish hardwood floors one room at a time? Of course!

Can you refinish wood floors in sections?





If your wood floors continue into other rooms of the home, you cannot sand, stain and refinish the one area. This would affect the uniformity and leave the rest of your wood floors looking different. The only way to refinish one room is to install a transition piece (or if there’s one in place already).

Can you stain floors at different times?

Water based poly dries and cures faster than oil based poly, but we recommend waiting a minimum of 3 days before putting any furniture on the floor. 5 days is more ideal!

Can you sand and stain one room at a time?

You could install a thin threshold between each room. That would cover the overlap in finish between the rooms. If the planks run parallel to the doors, you could cut out one board between the two rooms. That would give a clean line between finishes (and place the one board back at the end.

Can you polyurethane half a room at a time?

Can Your Polyurethane One Room at a Time? Much like the refinish, it’s best to polyurethane your hardwood floors simultaneously. It ensures there is proper continuity between rooms. That said, if you do choose to apply it room by room, the results don’t impede flow anywhere near as much as refinishing room by room.

Can you live in a house while refinishing floors?





Even if it’s not causing migraines, it’s still uncomfortable to live in a house where the floor is being refinished and there are strong odors in the air. If yours is a professional space, it can compromise work quality and work productivity of the employees as well.

What is the cheapest way to refinish hardwood floors?

Applying a revitalizer gloss is the simplest and cheapest way to refinish hardwood floors. This approach works best on floors that only have surface-level scratches and other minor wear and tear issues. You can get the job done without the need for equipment rentals or hard-to-find materials.

Should I refinish my hardwood floors myself?

If you only have some minor scratches and dings or a dull finish, you might be able to simply buff and add a new coat of varnish. But, even if your floors need a complete makeover, refinishing hardwood is a very manageable and rewarding do-it-yourself job that can save a lot of money.

How do I make my hardwood floors look new without refinishing?

To make hardwood floors look like new without refinishing:

  1. Try buffing and polishing with a commercial-grade buffer.
  2. Use a hardwood floor polishing sealant.
  3. Clean markers with toothpaste and a clean cloth.
  4. Apply a wood floor cleaner or oil soap for a high-gloss clean.


What grit sandpaper should I use for hardwood floors?

Start with 36-grit sandpaper for a floor that hasn’t been sanded in a long time or that has a lot of heavy finish on it. Floors that have been painted may even require you to go tougher and use 24 or 16-grit paper. Maple floors are so hard that they often require 36-grit sandpaper as well.

How do you fill gaps in hardwood floors?

How to Fill Floorboard Gaps With Wood Strips

  1. Cut the Strips. Measure the width and length of each gap between floorboards. …
  2. Glue the Strips in Place. Apply wood glue to the sides of each strip and gently tap it into the gap, using a mallet or hammer. …
  3. Sand and Stain the Strips.


How many times can hardwood floors be refinished?

A solid hardwood plank at least 3/4 inches thick will likely need to be refinished four to six times during its total lifespan. It’s commonly accepted that you refinish every seven to ten years. Important note: some hardwood is only 1/4 inches thick. In this case, a refinish could strip away all traces of the floor.

How long do you have to stay off hardwood floors after refinishing?

How long do I have to wait to use my room after my floors are refinished? We recommend waiting 6 hours before walking on your new floors in socks. After 24 hours you can walk through with shoes on.

How thick is hardwood floor refinishing?

You may be able to refinish your flooring up to three times if the wear layer measures at least three millimeters thick. A wear layer that’s less than two-millimeter thick can sustain damage if you refinish it more than once. Essentially, the thinner your wear layer is, the fewer times you should refinish it.

How much can you sand off hardwood floors?



Flooring professionals can sand away as much as 1/16 inches of wood with the coarsest paper. However, some engineered floors cannot sustain more than one heavy-duty sanding, as they may have a surface veneer of only twice that thickness. Refinishing these floors more than once poses a risk of wear-through.

Can hardwood floors be sanded and refinished?

Flooring experts estimate that hardwood floors can be sanded for refinishing up to 10 times, depending on the thoroughness of the sanding and the level of wear and tear on the floor. Situations differ, but you may not be able to refinish your hardwood floor more than 10 times.

Is it cheaper to refinish or replace hardwood floors?

Refinishing hardwood floors is more cost-effective than replacing them. On average, it costs about $2,000 to $7,000 to replace hardwood flooring (two to three times more than to refinish).

How much does it cost to install 1000 square feet of hardwood floors?

between $6,000 and $12,000



Installing hardwood flooring averages between $6 and $12 per square foot. On average, wood flooring costs between $3 and $7 per square foot for materials and $3 to $5 per square foot for labor. An estimate for installation of 1000 square feet of hardwood flooring runs between $6,000 and $12,000.

How much does it cost to put hardwood floors in a 2000 square foot house?

Most professionals charge per square foot — so installing hardwood flooring in a small, 500-square-foot living room will cost significantly less than replacing carpeting throughout a 2,000-square-foot home.
Hardwood flooring prices:

Total square footage Wood flooring cost per square foot (installed)
2,000 $8,000-$20,000

Are hardwood floors worth it?

As CNN reported, hardwood floors can also increase home value by 3-5%. This makes them a very attractive prospect for anyone looking to sell their house in the near future. However, even if you don’t plan on moving any time soon, hardwood floors may still be a good investment.