You won’t be able to dim from both ends, of course. You just need a “3-Way LED Dimmer” and follow the appropriate wiring. Replace one of the switches (on each set of lights that have two switches) with the dimmer – the other switch will turn them on or off, at wherever the dimmer is set.
Can I put a dimmer on a light with two switches?
With a standard single-pole dimmer, a single switch controls the light. With a three-way dimmer, you can control a light with two switches. You will need a three-way dimmer and a three-way switch. This lets you dim from one location and turn the lights on and off from another.
Can you dim multiple LED lights?
Both bulbs and the controlling dimmer switch are specifically rated to work together. With only a single lamp plugged in everything – including dimming – is fine.
Can I put a dimmer on a light with 4 switches?
While no 4-way dimmer exists, there are 3-way dimmers that you could replace one of your two 3-way switches with. You can only have one, the other switch plus the one or more 4-way switches in the middle must be toggle switches.
Can I put a dimmer on a light with 3 switches?
Dimmer switches can be installed on a three-way switch. This allows two controls to turn the light on and off, with a third switch left for the dimming function. Three-way switches can be used with single-pole applications when installing a dimmer switch.
Can you dim LED lights from two locations?
You won’t be able to dim from both ends, of course. You just need a “3-Way LED Dimmer” and follow the appropriate wiring. Replace one of the switches (on each set of lights that have two switches) with the dimmer – the other switch will turn them on or off, at wherever the dimmer is set.
Can you put a dimmer switch on LED lights?
While many LEDs today are dimmable LEDs (not all are) you should still use a special dimmer switch for LED lights in order to avoid some of the common problems associated with incompatible dimmers.
Do LED lights need a different dimmer switch?
A standard dimmer switch cannot be used with an LED light as you will never be able to dim the LED light either completely or not very well. LED lights need their own special electronic dimmer switch to have a fully functioning and dimming light.
How many LED lights can I put on a dimmer switch?
A rule of thumb commonly used to calculate a load for LED dimmers is to divide the stated maximum load by 10. For example a 400W dimmer switch should have no more than 40W of LED bulbs connected to it, which would equate to eight 5W bulbs.
What happens if you dim a non dimmable LED?
If you install a non-dimming LED bulb in a circuit with a dimming switch, it will likely operate normally if the dimmer is at its 100% or fully on. Dimming the bulb, will likely cause erratic behavior such as flickering or buzzing and ultimately may cause damage to the bulb.
What is the difference between a 2 way and 3 way switch?
In a normal switch, the two terminals are either connected (as shown) or disconnected. When they are connected, the switch is “on.” In a three-way switch, the top terminal connects to one or the other of the bottom two terminals.
What is a multi location dimmer switch?
Unlike 3-way dimmer switches, which cannot support multiple dimmers on the circuit, multi-location dimmer switches allow for dimming controls in more than one location. These can be paired with a compatible dimmer switch, non-dimming 3-way switches, or smart-home systems and remotes.
Can you put 2 dimmer switches side by side?
Dual dimmer switches can control two separate lights or a fan and light combination. A dimmer switch for a fan must conform to power load rating specified by the manufacturer. Lutron Electronics makes dual dimmer switches that fit inside a single box.
Can you add a dimmer to any light switch?
A dimmer switch can be installed anywhere that an existing on or off switch is in place. Replacing the current toggle switch with a dimmer switch will allow you to change the lights’ brightness, so long as you are using a light bulb that is compatible with the dimmer you have chosen.
What is a 2 way dimmer?
2-way and intermediate dimming often refers to a single dimmer switch which can be paired with a 2-way switch and an intermediate switch on a single circuit. This means that you can dim from one point and use the other two switches to simply turn the lights on and off.
How do you wire a double dimmer switch?
Quote from the video:
Quote from Youtube video: You'll also have a bare copper ground wire connect the ground wire to the green ground on the dimmer switch by twisting the two together and screwing on a wire nut.
What is the difference between a 1 way and 2 way dimmer switch?
1 way is an on/off switch and means there’s only one place you can turn your light on or off. This is the most common kind of switch found in most homes. Most 2 way switches can also be used as a 1 way on/off switch. 2 way means there’s another switch controlling the same light.
Can you get an intermediate dimmer switch?
This can be extended to four or more switches. With these two products, you have the flexibility to install intermediate and 2-way switches that look like dimmers. Only one of these switches can be a dimmer but you can use VARILIGHT touch and remote dimmers, V-Pro IR and Eclique2, to dim from all switch locations.
What is the intermediate switch?
An intermediate switch allows control of a single light from several locations, typically installed across three or more points in a room or building. This makes them ideal for use in stairways, landings and open plan spaces to provide a nearby switch from multiple positions.
