Can you put a pendant light where a recessed light is?

Quote from the video:
Quote from Youtube video: It's that your DIY. Project is only as good as your tools and supplies. And in order to transform this recessed can light into a pendant.

Can you use recessed light as junction box?





3 Answers. Show activity on this post. Modern recessed lights have junction boxes built in. You are free to daisy-chain other lights or receptacles, so long as you connect properly and do not exceed the number of wires for the size of the built in box.

How do I install pendant lights without attic access?

Quote from the video:
Quote from Youtube video: I would go in and make a hole at the top of the wall. Make a hole in the ceiling. And that would allow me to get into this bay. And then to grab the wiring.

How many amps does a recessed light pull?

The main limitation to the number of recessed fixtures you can run at the same time is the rating of the circuit breaker that controls the circuit. Each fixture with a 60-watt incandescent or halogen bulb draws about 1/2 amp, so a 15-amp breaker for a standard lighting circuit would be able to handle 30 of them.

How do you convert downlights to pendant lights?

Quote from the video:
Quote from Youtube video: Let's get started simply unscrew the bulb from the recessed light wrap the cord around the cord spindle to adjust it to your desired length. Screw the pendant into the light socket.

Can you change recessed lighting to chandelier?





In those cases, you can use the existing wiring to replace recessed lighting with a pendant or chandelier fixture using a recessed light conversion kit or change the entire setup of the light and use a standard fixture.

Can you convert recessed lighting to a hanging fixture light fixture?

Everything you Need to Complete the Project is Included in the Kit. Westinghouse Light Converter lets you convert recessed lights to pendant lights. The only other supplies needed to complete this project are a drill and a screwdriver.

Can you daisy chain recessed lights?

A daisy chain connects multiple light fixtures to the same circuit. It’s useful for recessed lighting, illuminating rooms, and connecting lights to the same switch.

Can you use an electrical outlet as a junction?

Yes. For code-compliance purposes: Each 14 gauge wire is 2 cubic inches, each 12 gauge 2.25. All of the ground wires count as a largest wire.

How many LED can lights can I run on one circuit?



Assuming a 60 watt light, you can put up to 24 lights on a 15 amp breaker. If you are using low-wattage LED bulbs, an LED bulb using 10 watts, you can install up to 150 bulbs on a single circuit.

How many lights can you run on a 20-amp circuit?

Maximum Lights Per Circuit



Technically, you can install 13 outlets or lights on a 20-amp CB, but you can only put ten lights per circuit due to the 80% rule of maximum continuous load.

Do LED lights draw less Amps?

When Dave connects incandescent bulbs to an amp meter, they draw up to 1.6 amps, but when LED lights are used, they only pull about . 26 amps. The difference is significant, especially for RVers who do a lot of dry camping.

Can you replace downlights with pendant lights?



now with Snap Lighting, you can replace your downlights with pendant lights easily and safely yourself. If your downlights are plug-in style (with the standard 90mm cut-out) you can directly replace them with Snap Lighting Universal Sockets!

What can you do with old recessed lights?

Squeeze the spring hinges on your LED light and insert them into the clips inside the old recessed can. These will hold the light in place. Finally, gently push your light up into the ceiling. Believe it or not, you’re done!

Can you change downlights to normal lights?

Though you can change a light bulb, and this includes replacing the bulbs in your downlights. Just be mindful of the clips and getting your fingers stuck in them. But, when it comes to installing new downlight fittings and wiring them in, it’s best to give your expert Electrician To The Rescue a call.

Do you need an electrician to change downlights?

The simple answer is – yes. There is no extra wiring involved or nothing different with what would be for a normal downlight. So you can take an old downlight out and put the new one in place e.g the Sengled Element, without any extra wiring.

Why do LED downlights flicker?



What makes LED lights flicker? Well… put simply, LEDs flicker when their light output fluctuates. This fluctuation happens because your dimmable light-emitting diodes are designed to switch on and off at very high speed.

Are my downlights halogen or LED?

What’s the easiest way to tell if I have LED downlights? Does your light glow a slightly yellow, or orange colour when it’s switched off? If so, then they’re very likely to be LED downlights.

What is the difference between downlights and recessed light?

Recessed lights, also known as downlights or can lights, are a type of lighting fixture installed into the ceiling or wall. They are designed to sit flush with the surface for a sleek and polished finish. The housing and electrical wiring components are hidden, and the bulb appears to glow from within the opening.

Is it worth replacing halogen with LED?

Replacing halogen with LED: Save money and the environment



For one, LED lamps consume around 75% less electricity than regular halogen lamps. A switch from halogen to LED will therefore lower the energy costs for households, and make electricity bills a lot more manageable. But LEDs don’t just consume less energy.