You may or may not have one. If there is only one cable in the switch box (with a black wire on one side of the switch and a white wire on the other side), the white would be be a “switched hot” and would not be a neutral. To get power to another light one needs a hot and a neutral.

Can you get power from a light switch to another switch?

You can pull power from a switch box—sometimes



Switch boxes can sometimes be used as a power source for a new outlet, but only if the box is large enough and has neutral and ground wires running through it.

How do you borrow power from a light switch?





Quote from the video:
Quote from Youtube video: And insert it into the metal conduit. Until it gets to the light fixture. And then you would take the black wire of the romex. Tie it into this feed line right here tie it into this feed line pigtail.

Can you get constant power from a light switch?

If there is a live power source in the light outlet as well as a switched conductor to control the light, then you can use the common neutral and tap into the constant power source in the outlet box so you have a live receptacle whether the light is on or not.

Can a double pole light switch be used as a single pole?

A double pole switch can be used to control light and a fan or 2 lights on separate circuits. It is easy to wire a double pole switch to work as a single pole switch because only one side is used instead of both.

How do I add another light to an existing switch?

Quote from the video:
Quote from Youtube video: We're going to run it. Through these joists here by drilling holes through.

How do you wire two switches and lights using the same power source?





Run 12-gauge electrical cable between each switch and the light it controls. Pull one end of each cable through the back of one of the light fixture electrical boxes. Strip both ends of each cable with a knife, separate the wires and remove 1/2 inch of insulation from the end of each.

How do I turn a double light switch into a single?

To replace two switches with one, simply eliminate one switch from the “power” circuit, and connect both outgoing wires (one is red, one is black in your photo) to the same switch. Beware: some switches are “3-way”, and so while they may appear to have separate terminals, the reality is they don’t.

What’s the difference between a single pole light switch and a double?

Both single pole and double pole switches can be either single or double throw. A pole refers to the number of separate circuits a switch can control, a single pole switch can operate one circuit whereas a double pole switch can control two circuits. A throw refers to how many positions can be activated by a switch.

How do you wire a double throw single pole switch?

Quote from the video:
Quote from Youtube video: Because you know you've got two options you can put the switch at so you'll always have one wire in the middle. And then you'll have a wire over here and a wire over here.

What does a single pole double throw switch do?



A single input with two different output switches is called Single Pole Double Throw switch (SPDT). Using this we can control two different circuits with the same single input. The switch can be operated by either manual method or integrated with the electromagnetic coil.

What is a single pole single throw switch?

A Single Pole Single Throw (SPST) switch is a switch that only has a single input and can connect only to one output. This means it only has one input terminal and only one output terminal. A Single Pole Single Throw switch serves in circuits as on-off switches.

Where is a single pole double throw switch used?

A Single Pole Double Throw switch can serve a variety of functions in a circuit. It can serve as an on-off switch, depending on how the circuit is wired. Or it can serve to connect circuits to any 2 various paths that a circuit may need to function in.

What is SP3T switch?



The word “throw” simply refers to how many ON positions the switch has. So if you have a triple throw switch it has 3 on positions. When you see SP3T it usually indicates three poles it can switch to.

What is a DIP switch?

A DIP switch is a dual in-line package switch, meaning that it consists of a series of switches in a single unit. It is an electromechanical device requiring a user to manually move the actuator so that a different electronic circuit is activated or deactivated.

Why is it called a DIP switch?

DIP is short for Dual In-Line Package. A DIP switch is a set of electrical switches packaged in a small box or housing. They are designed to be mounted on printed circuit boards to provide a range of electrical inputs to an electronic device based on the position of the individual switches.

Why do they call them DIP switches?

In electronics, the acronym DIP when applied to switch types stands for ‘dual in-line package’. A dual in-line package switch, or DIP switch, is actually set of small manual electronic switches that are designed to be packaged with other circuits.