To connect 2 4x4s use a half-lap joint secured with construction adhesive, two steel plates, and four to six 1/2″ or 5/8” through bolts. Posts that support roofs or platforms should lap between 20” and 24”, other structures should connect for 6” to 10” along the centerline.

Can you put two fence posts together?

The two easy ways are adding metal tie fastener to both posts on the front and back or adding a wood face board on the front and back of both posts. What is this? The third way is a bit more difficult since you have to create a half lap joint on each post and then connect the posts with through bolts.

How do you extend a 4×4 fence post?






Quote from Youtube video: Because we'll put another one on the opposite side and saw that again then to pre-drill and screw these filler pieces directly to the fence panels. And keep repeating on one side of the fence.

How do I attach a 4×4 to a post?

Quote from the video:
Quote from Youtube video: Let's take a few exterior rated 3-inch screws in my impact driver. And I'm just going to embed the screws. About half way at an angle I'll do another one. I generally do two per side.

Can you extend a fence post?

To extend wooden fence posts, you’ll just need wood planks that match the original posts. You’ll need to use fence brackets to attach the extenders to the posts. Finding extenders for concrete posts may be a little tougher than other materials. Extenders for concrete posts will be made of metal, wood, or vinyl.

How do you secure fence posts together?

Quote from the video:
Quote from Youtube video: Because it's going to be embedded in concrete. And you're going to want the screw to last as long as possible and those screws protruding from the wood post is going to give that concrete.

How do you connect two 4×4 posts?





To connect 2 4x4s use a half-lap joint secured with construction adhesive, two steel plates, and four to six 1/2″ or 5/8” through bolts. Posts that support roofs or platforms should lap between 20” and 24”, other structures should connect for 6” to 10” along the centerline.

How do I add more height to my fence?

One of the most popular ways to add height to a fence is to add trellis. A fence topper is an easy choice as it is specifically designed to sit atop your current fence. Most fence toppers are 1ft or 2ft pieces of trellis measuring 6ft in length to fit the whole width of the fence.

How do I add height to an existing wood fence?

Adding Extra Boards



The easiest way to add a few feet to your fence is to simply buy a few fence boards, then cut them down and add them to the back of the existing fence. To do this, start by measuring the height from the top of the slats to the fence rail because that’s where your new boards will sit.

How do I make my 4 foot chain link fence taller?

4 Easy Ways to Heighten a Chain Link Fence

  1. Add Welded Wire to the Top of Your Fence. One way to heighten your chain link fence is to add material to the top of your fence. …
  2. Add Mesh Cloth to the Top of Your Fence. …
  3. Add Tenax to Your Chain Link Fence. …
  4. Use PVC Piping or New Line Posts to Extend Fence Posts.



How do you add lattice to an existing fence?

How to Do Fence Lattice Extensions

  1. Measure the Width. Measure the width between the existing fence posts. …
  2. Source Your Materials. …
  3. Cut Lattice Sheets. …
  4. Cut Fence Posts. …
  5. Add Fasteners to Posts. …
  6. Secure Lattice Sheets. …
  7. Complete Final Steps.


How tall can I make my privacy fence?



Under California’s Building Code, you must obtain a permit before building a fence that will be over 6 feet tall unless the top 2 feet of the fence will be barbed wire. For a front yard fence, the maximum height is 42 inches. For a backyard fence, the maximum height is 72 inches.

Can I put trellis on top of my fence?

Some councils even encourage people to add trellis to the tops of their fences, because it is a good burglar deterrent. A trellis is not strong enough to support much weight, so it makes it difficult to climb.

How do you put privacy on a wooden fence?

Cheap Backyard Privacy Fence Ideas

  1. Use Super-Sized Planters. Buy several large planters and fill them with tall, decorative grasses or flowers. …
  2. Plant Trees Along Your Property. …
  3. Build a Living Wall. …
  4. Hang Outdoor Curtains Around Your Patio. …
  5. Buy a Retractable Backyard Screen. …
  6. Build a Privacy Screen. …
  7. Put Up a Simple Lattice Fence.


How do I block out my Neighbours view?



11 Cheap Ways To Block Neighbours View

  1. Erect a wooden fence.
  2. Plant trees, shrubs and hedges.
  3. Grow some bamboo.
  4. Grow ornamental grasses.
  5. Corrugated metal fence.
  6. Make use of super-sized planters.
  7. Hang outdoor curtains.
  8. Use of trellis.

How do I keep my neighbors from getting over the fence?

Although fences and brick walls can do the trick, adding an extra divider, screen or plant barrier can block your neighbor’s two-story view for good. To create your secret retreat, freestanding privacy screens, wood slat partitions and partially enclosed pergolas are effective (and nice to look at).

How far apart should fence posts be?

8 to 12 feet apart

Most fence posts can be spaced 8 to 12 feet apart. While this is a general criteria, it doesn’t cover all scenarios. For instance, high tensile fence can have larger spacing, requiring line posts every 15 to 20 feet for field fence styles, and as much as 20-30 feet for high tensile barbed and smooth wire.

How far apart do you put 4×4 fence post?



Typical spacing is right around 8 feet between each post however different circumstances may call for different measurements and it is not uncommon to have spacing between posts reach up to 10 feet. Once you have a rough idea of your post layout start by digging your first hole.

How deep does a 4×4 fence post need to be?

2 feet

Dig post hole so diameter of the hole is 3 times the width of the post (i.e., the hole for a 4” wood post should be about 12 inches wide). The depth of the hole should be 1/3-1/2 the post height above ground (i.e., a 6-foot tall fence would require a hole depth of at least 2 feet).