Can an electrical panel be in a clothes closet?

ANSWER: According to Section 240-24(d) of the National Electrical Code (NEC), which says “Overcurrent devices shall not be located in the vicinity of easily ignitable material, such as in clothes closets,” you are not permitted to do this.

Can a circuit breaker box be in a closet?

According to the NEC, electric panels are not allowed to be installed in closets. NEC 240.24(D) states, “Overcurrent devices shall not be located in the vicinity of easily ignitable materials, such as a clothes closet.”

How much space do you need around an electrical panel?

3 feet

The space around electrical equipment should always be clear to be on the safe side. There should be at least 3 feet of space in front of equipment with a 30 inch width as well as 612 feet of headroom space.

How much does it cost to relocate an electrical panel?

Estimated rates for moving a panel from one area of the home to another range from $1,000 to $3,000. Actual costs can vary depending on several project factors: Whether the unit is indoors or outdoors.

Can an electrical panel be in a cabinet?

You cannot put it next to anything. There must a clear space in front of the panel for an electrician to stand. The space must be kept clear for at least 3 feet in front of the panel, and for 30 inches left to right in front of the panel.

Can you put anything in front of an electrical panel?

The National Electrical Code [NEC 110.26 (A)(1&2)] requires a clear area for access and working in front of an electric panel that is 2.5 feet (30”) wide, 3 feet (36”) deep, and 6.5 feet (78”) high for a regular residential 120/240-volt panel.

Can an electrical panel be on an interior wall?

Installation. Electrical panels mount in interior walls or hang on basement walls. However, they might require horizontal clearance, preventing them from being mounted in corners or other tight spaces. Installation provides a practical limit on where you can install an electrical panel.

Can you put a junction box in a closet?

As far as I know junction boxes are ok for closets. Your local jurisdiction may have other ideas. Please consider consulting them. Today’s circuit panels are full of (expensive) AFCI breakers that will be damaged by flooding and running many wires can get expensive with current copper prices.

Can an electrical box be moved?

Remember that electrical boxes need to be flush with the wall. You can move the boxes out, but you’d have to cut the wall open. It’s easier to use a plastic or steel extension ring. They’re available up to 1-1/4 in.

How much does it cost to move a circuit breaker?

As a general rule the cost to move an electrical panel generally are between $1500 to $2000 dollars. This depends on location and what is actually involved. If you need permits and line trucks to disconnect the power the price goes up substantially. Speak to your electrician to get a valid quote before proceeding.

How do you move a breaker in a panel?


  1. Turn Off the Main Breaker. Make sure the ground or floor and the electrical service panel are completely dry. …
  2. Unscrew the Panel Cover. …
  3. Remove the Cover. …
  4. Test for Power. …
  5. Turn Off the Branch Breaker. …
  6. Rock the Breaker Back. …
  7. Pull the Breaker Out. …
  8. Unscrew the Breaker Wire.

Can a breaker panel be moved?

You can relocate electrical panels to suit your needs, although removing and reinstalling the breaker box and extending wires where necessary takes time. The most challenging part of the job will likely be moving the service wire coming in from the outside.

Can you relocate a fuse box?

yes it can be moved, an electrician can move the fuse box, and the utility company would need to move the electric meter.

Can electrical panel be in a bedroom?

Can An Electrical Panel Be In A Bedroom? Similar to the fuse box, there is no NEC regulation that electrical panels shouldn’t be located in the bedroom. So, if you find one in your bedroom, do not panic. However, if it’s located close to your bed, ensure to move your bed as far away as possible from the panel.

How do I cover my electric panel in my living room?

Strategically placed artwork, framed message boards, or a weaving or tapestry are all viable options for covering up obtrusive electrical eyesores. HGTV suggests inserting child proof safety plugs into unused outlets before covering with artwork.

Is it code to have electrical panel in bathroom?

Is it legal to have an electrical panel located in a bathroom? An electrical panel containing the service disconnecting means cannot be located in a bathroom [230.70(A)(2)]. In dwelling units and guest rooms or suites of hotels and motels, overcurrent devices cannot be located in bathrooms [240.24(E)].

Can you put a breaker box in a bedroom?

Yes, a bedroom is an allowed location for an electrical panel. When the panel is placed in the bedroom, the electrician usually puts it in the area behind the door swing.

Can a sub panel be located in a bedroom?

It should be safe as long as you maintain the required minimum distances to flammable materials and don’t obstruct access to the panel. That means you can’t cover the panel or have it near any wall hangings, curtains, bedding, etc.