Short answer: No, you can’t run flexible cord through the ceiling/walls.

Is it safe to run extension cord in attic?

DON’T use extension cords to connect wires in the attic or above suspended ceilings/ANYWHERE. These are just accidents waiting to happen. A common violation is found in the installation of ceiling-mounted electrical equipment like projectors in training and meeting rooms (as in the following photo).

Can you run extension cord ceiling?





Running through holes or hidden in floors, ceilings and walls. Extension cords should never be used in place of proper electric wiring. Running through windows, doorways and other openings. This may result in the cord starting to fray or becoming damaged, which can create a fire hazard.

How do you route an electrical wire in the attic?

Quote from the video:
Quote from Youtube video: As you crush those wires they may short out. So a better practice is to use something like that over there which is known as a j-hook. You take your J hook. And you mount it a few feet.

Can you wire a plug to a ceiling light?

You can wire a ceiling light to a plug. It can be done by re-wiring the light with the use of an extension cord and plugging it into the available wall outlet. This is an easy DIY solution if there is no hardwire available on the ceiling.

Can you run electrical wire through attic?

An attic can be a hazardous work space. New lighting, cable, computer networking and sound systems can all require wiring that may need to come through the ceiling. On a single-story home or the the upper floor of a multiple story home, this means accessing your attic to run wire.

Can I cover electric cables with insulation?





Absolutely, for grant purposes you are required to lift or expose cables whichever is practicable, this is more of a butt covering exercise should a freak condition arise where the cable has been affected by the insulation rather than a reality.

Is it safe to run a power cord through the wall?

It is perfectly safe to run most cables through a wall! Really, the only cable you absolutely should not run through a wall is a standard power cable that plugs into an outlet.

Can I run an extension cord through conduit?

You can use a rigid galvanized metal conduit, but ensure you bury it 18 inches underground. Another option is a PVC conduit, which is resistant to corrosion. A Pro Tip: It would make sense to install a GFCI (Ground Fault Circuit Interpreter).

Can I use Romex as an extension cord?

That company was taken over by Southwire, and today ROMEX® is a trademark name, like Kleenex. Because it is not very flexible, it is not generally used for extension cords, but it can be. Use the correct gauge wire for the load you plan to service with the cord.

Can you put a plug on lighting cable?



Yes, you can. You must make sure at the lamp end that the flex is securely gripped by a suitable cable gland or other strain relief to prevent the cable being tugged out and exposing live wires.

How do I convert a ceiling light to a plug-in?

How to Convert a Hardwired Fixture to Plug-In:

  1. Choose a light fixture to convert.
  2. Locate, Separate, and Strip Wires.
  3. Acquire a new plug with removable parts.
  4. Prepare & Open Replacement Plug.
  5. Remove Prongs & Loosen Screws.
  6. Thread the new Plug onto Light Fixture’s Cord.
  7. Attach each wire to 1 Prong.
  8. Reassemble Plug with New Wires.

Can a plug-in light be hardwired?

unconventional way). One major benefit of turning a plug-in light into a hardwired one is that a plug-in is often far cheaper than a ready-to-go hardwired one. They are way more customizable too, and it only takes about 5 minutes to transform the fixture! You can see this one in place hanging from the ceiling here.

What is the difference between hardwired and plug-in?



The clear difference between hardwired and plug-in products is obviously the fact that one gets hardwired into your home by an electrician and the other is plugged into an electrical outlet.

What does a hardwired light mean?

Hard-wired sconces don’t have exposed wires and are permanently wired to your home’s electrical system. They operate either by a wall switch or by a switch in the fixture. For control over your lighting scheme, put sconces on a dimmer switch.

How can I add light to a room without wiring?

4 Ways to Update Your Lighting Without an Electrician

  1. Light bulbs and Lampshades. Start with something simple, like changing out your light bulbs or even your lampshades. …
  2. Plug-in pendant lights. …
  3. Plug-in wall sconces. …
  4. Wireless LED motion sensor lights.


Are there LED lights that don’t need to be plugged in?



Battery Powered(AA batterieds not included) led light strip,no need extra AC or DC power.It can be installed inside or outside depending on the version you choose, and is great for computer light,tv backlight, accent lighting, patio lighting, auto lighting, and more.

How can I power a string without an outlet?

7 Best Christmas Light Options Without an Outlet!

  1. Use Extension Cords.
  2. Give Solar Lights a Chance!
  3. Use Battery Operated Lights.
  4. Bluetooth Lights Are an Option.
  5. Don’t Forget Rechargeable Lights.
  6. Use USB Lights.
  7. Give Light Socket Adapters a Go.


Are there LED strip lights that don’t need to be plugged in?

Led strip lights can be installed without needing to plugged them in. The LED strips will work with any 12-volt power source; that’s the same voltage as most car batteries.

How do you connect LED strip lights to power supply?



For this, all you need to do is connect the led strips to the ends of your led splitter and then plug in your female connector to the male connector on your power supply. This will ensure that power is distributed evenly and the lights are working as they should.

Do you need electric for LED lights?

LED strips, unfortunately, are not as simple as traditional incandescent light bulbs when it comes to installation and set up. Because they run on low voltage DC, they require a power supply device that converts 120V/240V AC (depending on your location) into the voltage signal that LED strips can use.