Yep it can be done! Make sure as you separate the wires of the clock/lamp notice the one with the groves in it. Those are your hot wires. Twist both them together, wire nut then tape ( electric tape ) then twist cap and tape your two smooth ( neutral )_wires.

Can a lamp cord be spliced?

The easy way to fix a lamp cord is to splice into the old one. If the cord has visible damage and you have no reason to believe there’s anything wrong inside the lamp, you can take this approach.

Can I combine power cords?

While stringing together two extension cords can work as a temporary solution, such as in the case of a short power failure, it creates a significant risk when used as a long-term solution. Extended cords reduce the wattage capabilities of each cord and may lead to meltdown and fire.

Can you shorten a cord on a lamp?

Quote from Youtube video: For tools we'll need a screwdriver. And a wire cutters and strippers if you don't have this we can probably make a scissors work start by unplugging your lamp take off the shade.

Can you cut an electric cord?

Using electrical scissors, wire cutters or a pair of sharp shears, cleanly cut the plug off the end of the power cord. You don’t need to slit the insulation or remove any material or wire right now. If there are nicks in the cord close to the plug, trim those parts off as well.

Which wire is hot on a lamp cord?

When wiring a grounded power cord to an appliance: The SMOOTH (right) side is hot = connect to BLACK. The GROOVED (left) side is neutral = connect to WHITE.

How do you fix a broken lamp wire?

Quote from the video:
Quote from Youtube video: If you choose to use the existing cord as a fish. Then cut one conductor off on the new cord. And I'll set it like that on the old one tape it like this. And pull it through mark.

How do you splice two cords together?

Quote from the video:
Quote from Youtube video: With the factory harness is I've cut both ends. You can do this same thing with a knife. However. You've got to be very very careful especially when you're working with delicate wire.

Can you plug two extension cords into the same outlet?

Can you plug 2 extension cords into 1 outlet? Yes, you can. This is also true for power strips and surge protectors. However, you run the risk of overloading the outlet, especially if the appliances attached to the two extension cords are not only powerful but numerous.

How many things can I plug into one outlet?

two appliances

Never plug more than two appliances into an outlet at once or “piggyback” extra appliances on extension cords or wall outlets. Use only outlets designed to handle multiple plugs. Know the amount of power you’re placing on an outlet or circuit. Some recommend each outlet or circuit should not exceed 1,500 watts.

How can I make my electrical cord shorter?

Quote from the video:
Quote from Youtube video: Using our wire cutters or razor blade. Then we'll take the wire and feed it. Through. We'll do the same thing to the other side now the way we're going to determine the length of our wire.

Can I cut a cable cord with scissors?

Avoid using scissors to cut wire.

It is best to use a wire cutter or plier hand tool rather than using scissors or a blade. Even a sharp pair of scissors may not cut through wire without damaging the internal metal.

How do you fix a broken cord?

Quote from the video:
Quote from Youtube video: So let's get started so what these plastic tubes are check this out it's heat shrinking tubing right for making electrical repairs this kit this is heat shrink tubing as well different diameters.

How can I fix my power cord without soldering?

Quote from the video:
Quote from Youtube video: Place the crimp connectors in the middle of the pliers as shown. So the sizes match. Press hard and wait a few seconds. Then release the pliers. This method is a bit more complex.

Can you fix a cord that has been chewed in half?

Quote from the video:
Quote from Youtube video: First thing you want to do is cut the chewed section and the plug. Off the wire. Then separate the two wires about an inch and a half down then you want to strip the wires. Using a wire strippers.

How do you put a new plug on a lamp cord?

Quote from the video:
Quote from Youtube video: First thing you want to do of course is to cut the plug. Off you can do that with a pair of needle nose pliers or wire cutters cut the old plug off.

How do you splice a power cord?

Quote from the video:
Quote from Youtube video: Select one on is the smallest diameter. Possible that will still slide easily along the cord. Don't forget to take into consideration whether the heat shrink will fit over the splice section of wire.

Is the black wire the hot wire?

Hot wire is identified by its black casing. This is the main color of hot wire for most homes. However, other hot wires can red, blue, or yellow, although these colors can indicate a different function besides powering an outlet.

How do you know which wire is hot and black?

Place the prong of the multimeter’s black wire on the bare metal on the end of a white wire, then read the meter. If you get a reading, the black wire is hot; if you don’t, the black wire isn’t hot.

What happens if you mix up hot and neutral wires?

This happens when the hot and neutral wires get flipped around at an outlet, or upstream from an outlet. Reversed polarity creates a potential shock hazard, but it’s usually an easy repair. Any $5 electrical tester will alert you to this condition, assuming you have a properly grounded three-prong outlet.

What happens if you connect the wrong wires on a light fixture?

But here’s the catch: If you connect the circuit wires to the wrong terminals on an outlet, the outlet will still work, but the polarity will be backward. When this happens, a lamp, for example, will have its bulb socket sleeve energized rather than the little tab inside the socket.