Yes, you can do that and it will swap the power to the light and fan. Just remember to turn off the power at the breaker before doing any work.

Can you wire a fan and light switch together?

Connecting a Light and Fan to a New Switch



Connect the white wires together in the same way, then repeat with the ground wires. When you splice ground wires, you don’t have to cap them, but it’s still a good idea to do so because the cap helps keep them together. Mount the fan and light and move to the switch box.

Can I change ceiling fan to light fixture?





An outdated ceiling fan can be replaced with a modern light fixture to give a room a fresh look. Because most ceiling fans are heavier than the average light fixture, the ceiling electrical box and wiring can be used.

What happens if I wire a ceiling fan wrong?

Wiring the fixture incorrectly could lead to circuit breakers tripping, lights burning out quickly, or a ceiling fan turning in the wrong direction. Fortunately, this is something any homeowner can do with an inexpensive voltage tester.

How do you wire a ceiling fan and separate light to one switch?

How to Connect a Ceiling Fan & a Separate Light to One Switch

  1. Shut Off the Circuit Breaker. …
  2. Remove the Wires From the Switch. …
  3. Strip the Insulation From Each End. …
  4. Create a Four-Way Pigtail Splice. …
  5. Test the Physical Connection. …
  6. Screw the Pigtails Into the Connectors. …
  7. Reattach the Switch.


Can I connect blue and black wires together?





If you only have one switch, connect the black and blue wires. The black and blue wires need to be connected. You will be able to control your fan and lights with a single switch.

Can I connect red and black wires together?

These wires are typically used for switch wiring as well as the interconnection between smoke detectors hard-wired into the power system. You can link two red wires together, or you can link a red wire to a black wire. Since red wires conduct current, they are considered hot.

How do you rewire a ceiling fan?

Quote from the video:
Quote from Youtube video: And light fixture to install connect the green and grounding wires. Together then the white wires. Together. Then connect the fans blue and black wires to the homes black and red wires.

Why is there a red wire in my ceiling fan?

A red wire up in the ceiling fan junction box usually indicates that the wiring has been installed which provides separate switch for the light and a separate switch for the fan motor. If your ceiling fan does not have a light fixture, then simply cap off the red wire and attach the fan motor to the black wire.

Can you replace a ceiling fan without a light with one with a light?



You can. Only difference being, if the existing fan is switched, that your light and fan will be powered by the same switch. You can optionally use the new units pull cords to operate the fan and light kit separately.

Can I connect red and black wires together ceiling fan?

Connect the red wire in the ceiling to the black wire in the light kit and the black wire in the ceiling to the black wire in the fan. Tuck the wires back into the box. Turn the power back on and test the fan.

Which wire is hot when both are same color?

In most modern fixtures the neutral wire will be white and the hot wire is red or black. In some types of fixtures, both wires will be the same color. In this case, the neutral wire is always identified by some means. In some cases, there will be small writing on the wiring case.

What color wires go together on a ceiling fan?



Black wire is for the fan. Blue wire is for the light, if light is included with the fan. White wire is neutral. Green wire is for the ground.

When hooking up a ceiling fan where does the blue wire go?

The blue wire from the ceiling fan gets connected to the second live wire from the ceiling. This second wire can vary in color but is most commonly red or black. This connection allows you to power your lights from the second switch. Connect the white grounded wire from the ceiling to the white wire from the fan.

What color wires go together for a ceiling light?

Black wires always signify the positive, or hot, leg of the current, while white wires signify negative, also called neutral or return. Ground wires are either left bare or covered with green insulation. When there is an extra hot wire, it is red. Ceiling fixtures almost always have a black and white wire.

What are the 3 wires in a light fixture?

A standard box for a light fixture will have three wires, a white (neutral), black (current), and copper (ground.)

What happens if you wire a light fixture wrong?



But here’s the catch: If you connect the circuit wires to the wrong terminals on an outlet, the outlet will still work, but the polarity will be backward. When this happens, a lamp, for example, will have its bulb socket sleeve energized rather than the little tab inside the socket.

Which color wires go together?

See Table below. The protective ground is green or green with yellow stripe. The neutral is white, the hot (live or active) single phase wires are black , and red in the case of a second active.



US AC power circuit wiring color codes.

Function Line, 3-phase
label L3
Color, common blue
Color, alternative yellow