Yes it doesn’t have to be a neutral to carry current in the opposite direction.
Can you jump a hot wire from one switch to another?
The pigtail gives you two hot wires instead of just one. Connect one wire to the first switch in the box and the second wire to the other switch, and connect the black wire from each of the lights to the other terminal on its respective switch.
Can you split a hot wire to two switches?
Show activity on this post. That is a perfectly functional way of splitting a single hot (highlighted green in your sketch) to supply power to two separate switched fixtures. However, most smart switches require a neutral conductor in the switch box so there can be an always-on connection for the “smart” circuitry.
Can I borrow a neutral from another circuit?
No, you can’t steal a neutral wire from another circuit. Each neutral wire is the return for the corresponding hot. If you “steal” a neutral from another circuit you run the risk of overloading that neutral wire (overheat, fire risk). Another issue might arise if the circuit later becomes a GFCI.
Can I take power from a light switch?
Switch boxes can sometimes be used as a power source for a new outlet, but only if the box is large enough and has neutral and ground wires running through it.
How do I wire two switches with one power source?
Quote from the video:
Quote from Youtube video: So one cable supplying these two switches this is already set up for from a different model for a different power source.
How do you connect two switches together?
Quote from the video:
Quote from Youtube video: Together using the uplink port method you will use one uplink port connected to one regular port then uplink port connected to the next switch's regular port just like in this diagram.
Can you pull power from a 3 way switch?
To use the 3 way for power you need to check 2 things: 1) as stated above, make sure you have the neutral wire available in that particular switch box (white wires, probably at least 2 joined together w/ a wire nut-NOT CONNECTED TO THE SWITCH) #2 even if there are neutral wires available, usually one of the two 3 way
What is daisy-chain wiring?
In electrical and electronic engineering, a daisy chain is a wiring scheme in which multiple devices are wired together in sequence or in a ring, similar to a garland of daisy flowers.
Why would an outlet have 2 hot wires?
The reason for multiple hot/neutral wires for one outlet is that the outlets are daisy-chained together. This means hot/neutral is only coming from one of the wires and it is being sent to the other wire.
How do you run power from one switch to another?
Quote from the video:
Quote from Youtube video: Now i can connect the switches to the hots i put my red switch feed which was the old switch leg out to the old light slide that into the switch. And take my new hot wire.
Can you run a spur from a light switch?
You’d probably do better running the spur from the nearest light fitting, or the CU (fuse box) unless there is as some have pointed out, a neutral at the light switch.
Can you wire a socket from a light switch?
If there is only a single cable into the box, where the brown goes into COM on the switch plate and the blue goes into L1, the blue is switched live and is NOT neutral. If this is the case you most definitely cannot safely add a socket.
Can you daisy-chain light switches?
Daisy chaining is a simple way to connect two or more light fixtures. Multiple light fixtures operated by a single switch can be most easily wired through a process known as “daisy chaining.” This is a simple, serial wiring scheme that connects the wires of the light fixtures one to the next in a single circuit.
How do you wire a multi switch box?
Quote from the video:
Quote from Youtube video: So you can just take some excess wire ground wire. And cut them up. So then you can use them as pigtails. And you're also going to repeat this process when we start hooking up the hot wires.
How do you jump from one outlet to another?
Quote from the video:
Quote from Youtube video: All right so the connections are really pretty easy the white wire goes on the silver screw which is where the white wire is now and on the other side there's a brass screw.
Can you piggyback off an electrical outlet?
Piggybacking is a wiring technique that jumps from one junction box to another. As long as the maximum amount of amperage per circuit is observed, this technique is safe. Piggybacking is possible because of the four wiring terminals found on each outlet and is a standard process when wiring a home.
How do you tap into an existing electrical wire?
Quote from the video:
Quote from Youtube video: And pull your wire back up into whatever hole you've drilled but i'm just going to tear off a piece of this. I'm just going to mark.
Can I draw power from a wall outlet to add a light and light switch?
Adding an electrical outlet next to an existing light switch is easy, as long as there is a neutral wire in the box.
- Step 1: Turn the power supply off to the light switch at the main electrical panel.
- Step 2: Remove the switch plate and unscrew the switch from the outlet box.
- Step 3: Pull the switch out from the box.
How do I wire a receptacle from a light outlet but keep it hot when light is off?
In this case, you must change the cable from the switch to the light outlet from a 2-wire to a 3-wire cable. As you can see, connecting a receptacle to the light would see the receptacle only hot when the light switch is on.
