I’d say no, not a chance in my opinion. City water pressure will flood you and spray hard once you cut that pipe. You need the water shut off. From my experience with much lower pressure fitting failures and unsuccessfully trying to push a fitting back on to a running pipe.
Will SharkBite work for compressed air?
With SharkBite and John Guest Air & Pneumatics, we now have two world-class, reliable push-fit solutions to suit all compressed air and pneumatics applications,” said Phil. “Downtime will be a thing of the past, and pipelines can be reconfigured in just seconds, rather than hours or days.
When should you not use SharkBite?
Quote from the video:
Quote from Youtube video: But for an emergency installation. Or an emergency. Situation. That's not a bad deal. But that is the only time that I would ever use it. So for emergency uses if you've got a flood.
How much pressure can a SharkBite handle?
SharkBite fittings are certified to 200 PSI and 200°F (93°C).
Why do plumbers not like SharkBite fittings?
Another possible disadvantage to using SharkBite fittings is that many plumbers feel that these fittings simply aren’t strong enough to create a tough, durable connection.
What kind of PEX is used for compressed air?
Some of the more frequently used materials are copper, black iron (or galvanized) pipe, stainless steel, PVC, and cross-linked polyethylene, more commonly known as PEX.
What type of copper pipe is used for compressed air?
Copper pipe is a common selection for sensitive compressed air systems and when correctly sized and connected is very durable and effective. Type M hard, type L hard and type K soft copper has a working pressure of 250 psig (17 bar). Type K hard copper is rated for 400 psig (27 bar).
Are shark bites as good as solder?
These groups of home owners feel SharkBite fittings are just as strong as soldering. A few of the criticisms of SharkBite and other push-fit fittings consist of; initially, push-fit fittings do not have the trustworthiness that soldering has. Soldering has actually been around much longer than push-fit fittings.
What is the life expectancy of a SharkBite fitting?
SharkBite fittings last a long time. In fact, SharkBite warrants the fittings for 25 years when used with SharkBite tubing.
Is SharkBite plumbing up to code?
Approved by the Uniform Plumbing Code, International Plumbing Code, and National Plumbing Code of Canada, properly installed SharkBite fittings offer permanent connections, says Product Manager Michael Kornegay.
Where should you not use SharkBite fittings?
A SharkBite fitting contains a rubber O-ring, which is not best for permanent connections. We don’t recommend using a SharkBite fitting outside because sunlight can dry out the rubber O-ring and cause it to crack or split.
Are SharkBite fittings good for hot water?
Yes, you can use SharkBite fittings on hot water lines. Remember, however, that they only work with copper, PEX, and CPVC pipes.
Is SharkBite and PEX the same thing?
Been reading a lot about the differences between Pex and Sharkbite. Pex is a plastic pipe material, and the obvious choice to replace copper plumbing. Shark Bite is one type of connector that can be used with pex. SB’s are easy to install without tools and are very reliable.
What is the best pipe to use for compressed air?
Copper. Copper piping is an excellent choice for use with air compressors. Any condensation that builds up in the system will not corrode copper air compressor lines, so the risk of debris entering the system is very low. It also withstands heat well.
How much air pressure can PEX pipe handle?
PEX-a pipe can withstand a burst pressure of around 800 psi (almost two times the requirement for ASTM F876, the standard specification for PEX tubing). So neither the pipe nor the fittings are weak points, making for an extremely high-performing system in domestic water and hydronic piping applications.
How do I connect my PEX to my air compressor?
Quote from the video:
Quote from Youtube video: It goes behind the workbench. And it ties in right here to a regulator. With that regulator I can set it to whatever working pressure I want so if I want it at 40 psi for painting.
How much pressure can 3/4 PEX hold?
In accordance with ASTM F876, the minimum hydrostatic burst pressure for PEX pipe is 480 pounds per square inch (for 1/2-inch pipe) and 475 psi (for 3/4-inch pipe and larger) at 73.4 degrees F.
Can PVC pipe be used for compressed air?
The use of PVC pipe is common but not recommended for use with compressed air. The biggest reason is because it is against OSHA Regulations to utilize PVC and plastic pipes in the United States for compressed air usage. It is, however, often used because it is readily available, inexpensive, and easy to install.
Can you pressure test PEX with air?
It is the recommendation of the PPI that PEX pipe and tubing systems be permitted to be tested with compressed air or inert gas, provided that the manufacturer’s instructions are followed and that all testing is performed in accordance with the local code regulations.
What PSI should water lines hold?
between 40 and 60 PSI
Normal water pressure is generally between 40 and 60 PSI. Most homeowners prefer something right in the middle around 50 PSI.
How many pounds of pressure should a plumbing system hold?
The pressure level can vary, but 60 PSI (pounds per square inch) is recommended for most residential homes. Water pressure should not be higher than 80 PSI. Anything higher can cause major appliances, including water heaters and toilets, to stop working properly because of the stress on plumbing and other parts.
