NO. You will need to get bits designed for concrete. Concrete is very abrasive and will destroy a wood bit in microseconds and not do much of anything to the concrete.

Can you use a router on concrete?

However bear in mind that your router’s motor isn’t designed for pushing through something as hard as concrete. I’d suggest surface mount EMT conduit or, if you really want it in the wall, you could also use a concrete blade in a circular saw.

Can you use any bit in a router?





There are two common sizes of router bit shanks: 1/4″ and 1/2″. Many routers come with interchangeable 1/4″ and 1/2″ collets so that either size bit can be used, but some accept only 1/4″-dia. shank bits.

What can you do with a straight router bit?

While in a class of their own, straight bits are usually used for cutting different types of square-shaped grooves. These grooves can be cut with the wood grain (the technical definition of a “groove”), against the wood grain (called a “dado”), or along the edge of wood to produce an L-shaped shoulder or “rabbet”.

Do I need a wood router?

It’s a great power tool to own because it is portable and can be used for a range of cutting, trimming, and shaping tasks on wood, plastic, metal, and laminates. Indeed, many woodworkers consider the router to be the single most versatile woodworking power tool in their arsenal.

What is a concrete router?

Marathon has engineered a concrete router to effectively rout meandering cracks in concrete prior to sealing. An electric start 30hp Kohler engine powers this rugged machine through the most demanding conditions. Long life diamond blades cleanly rout cracks, eliminate spalls and reduce costly blade change time.

How do you cut concrete slots?





Wire Saw. If you need to cut large portions of concrete to be cut down, probably the best thing you should go for is the wire saw. They work well on projects that are otherwise too large for Chain or circular saws. They can cut lengths and depth, which would be impossible for blade mounted machines.

In which direction should you move the router when routing outside edges?

When routing along an outside edge using a hand-held router, you should always work from the left to the right, against the rotation of the router bit. Feeding in the right direction allows the router bit to pull itself (and the router) up against the edge of the material, creating a smoother cut.

How do I know what size router bit to get?

Router bits come in a few different sizes, but for general purposes, you will almost always reach for a 1/2-inch router bit. These offer better stability and overall performance than smaller router bits. For fine or slight edge work, a 1/4-inch bit may be preferable.

Can you use a spade bit in a router?

You can do both. The router does a good job of keeping the hole vertical. However, it might not go to the depth you wish that easily. Start with forstner bit in drill, finish with spade bit.

Can a Dremel be used as a router?



When woodworking or doing other DIY projects involving routing, this attachment converts your Dremel Multi-Tool into a plunge router. In other words, it negates the need for a separate plunge router tool. With just this one attachment, you can use your tool to rout circles, cut letters and signs, as well as inlay work.

Is a router table worth it?

A good set-up and steady push result in a smooth, burn-free molding. Router tables are great for cutting your own moldings. Using a router table is easier and faster than using a router alone; you don’t have to clamp the board. And narrow boards that are hard to shape with a router are a cinch on a router table.

How do you use a freehand router?

Quote from the video:
Quote from Youtube video: So you put the router. Bit into the collet. Then pull it back about the thickness of a coin or or even a standard size washer and the reason we do that is to allow for any expansion.

How can I route without a router?



Luckily, there are many ways you can cut a groove without the use of a router.

  1. Table Saw. If you have a table saw available, you can use one of them to cut a proper groove. …
  2. Dremel. You can also use a Dremel tool to cut a groove properly. …
  3. Rabbeting Plane. …
  4. Chisel.


Do you push or pull a router?

Quote from the video:
Quote from Youtube video: What you want to do is you want to take the router. And you want to move the router on the outside counterclockwise around the piece.

When using a router which direction do you go?

When looking straight down at the top of a router, the bit rotates in a clockwise direction. That means you should move the router from left to right, but—and this is important—that’s only true when the router is positioned in the middle between you and the workpiece.

How deep can a router cut?



Adjust the bit so it’s cutting somewhere around 1/4-inch deep. Run the wood through the router to make the cut. Raise or lower the bit and repeat until you’ve cut a groove to the depth you want. A handheld router needs the bit lowered.

Do you use a router left to right?

Quote from the video:
Quote from Youtube video: So let's look at some basics then we'll touch on three situations. That might arise in your workshop. Think of your router. Bit as a small wheel. As you typically hold a handheld router with the bit

How do I keep my router straight?

Quote from the video:
Quote from Youtube video: The bearing of the bit ran along the straight edge of the mdf cutting perfectly straight lines on the work pieces. This process was ideal in this situation because the work pieces were oddly shaped.

Can you plunge a straight router bit?

All spiral router bits are able to plunge cut. Straight router bits with cutting edges that extend half to all of the way across the base of the bit, will allow it to plunge cut.

Can you use a laminate trimmer as a router?



A modern laminate trimmer can perform almost any task that a larger handheld router can do, with the caveat that the smaller machine may be limited in the size of bit that can physically fit within its collet and the base plate.