Given the right size hole, it would absolutely be strong, (maybe not AS strong) but that hole would need to be drilled to a roundness within about +0.05″ of the diameter of the rivet, which I highly doubt you’d be able to accomplish with a hand drill in concrete.

Where should blind rivets be used?

Blind rivets and blind riveting pliers are also called pop rivets and pop riveters. They are used to fix together hard materials such as sheet metal and metal objects when you have access to only one side of the material – for example, when you fit mudguards on your car or gutters on your house.

Are blind rivets watertight?

Categories of Blind Rivets



Standard: The most common and the least expensive, these blind rivets are not watertight and aren’t as strong as other types of fasteners. Sealed: Similar to standard rivets, the mandrel on this rivet is completely enclosed, making it watertight.

What is the difference between a rivet and a blind rivet?

Blind rivets, also commonly referred to as POP Rivets, are mainly used in applications where there is no access to the rear (blind side) of the joint. Rivets have a two-piece construction; one is called the rivet body, shell, or hat and another is called the stem or mandrel.

What is the difference between solid and blind rivets?

Unlike solid rivets, blind rivets can be installed in joints from only one side of the part—making them “blind” to the opposite side.

How strong are blind rivets?

McMaster rates pop rivets in tensile strength as well as shear strength. A 3/16″ aluminum blind pop rivet has a shear strength of 310lbs and a tensile strength of 500lbs.

Are rivets stronger than screws?

A benefit of the hollow shafts and softer metals used for pop rivets is that it makes removal relatively easy. A drill bit can be easily seated in the hollow end and used to remove the head. By contrast, solid rivets are perhaps the strongest mechanical fastener available.

What type of rivets are waterproof?

CUP stainless steel rivets are the first available on the market that are 100% waterproof when under up to one metre of water.

What can I use instead of rivets?

There are a number of alternatives to rivets, including welding, brazing, nuts and bolts and adhesives. These are all ways of either permanently or temporarily fastening materials together.

Where can you use rivets?

10 Common Uses for Rivets

  1. Aircraft. Facing strong headwinds, high altitudes, and heavy loads, aircraft of any kind need to be made from solid, strong materials. …
  2. Pots and pans. …
  3. Window blinds and coverings. …
  4. Aluminum boats. …
  5. Trailers and campers. …
  6. Military equipment. …
  7. Loudspeakers. …
  8. Electric and magnetic motors.

Are blind rivets Hollow?

A blind rivet is often manufactured with a smooth, hollow, cylindrical body that can be capped with a dome head (large flange or countersunk) and finished with a solid mandrel that maintains a bulbed head which extends from the hollow rivet shaft.

How do you install blind rivets?

Quote from the video:
Quote from Youtube video: Take our rivet gun. Slide that over the surface. And then put the pin into the rivet gun. Okay then we take our handle we squeeze release let the rivet gun come back down squeeze gun till it pops oh.

What is the strongest type of rivet?

Stainless steel rivets

What is the strongest rivet? Stainless steel rivets combined with either stainless steel or steel mandrels are the strongest. However, steel rivets combined with steel mandrels are also solid.

Why are rivets no longer used?

Indeed, the latest steel construction specifications published by AISC (the 14th Edition) no longer covers their installation. The reason for the change is primarily due to the expense of skilled workers required to install high strength structural steel rivets.

What happens if you use too long of a rivet?

Match Rivets to Material Thickness



Actual rivet length is longer that the grip range. If the rivet’s grip is too short, it creates a weak joint. If the grip is too long, the cost of the rivet will be unnecessarily high and the rivet may interfere with blind-side clearance.

What are the disadvantages of rivets?

Disadvantages of Riveted joints

  • Due to holes plates become weak.
  • Labor cost is more.
  • Overall cost of riveted joints is more.
  • They have more weight than welded joints.
  • Riveting process creates more noise.
  • Stress concentration near holes.


Which is stronger welding or rivet?

A properly welded joint is stronger than a riveted joint if we consider the forces that can draw pieces apart. Therefore, welding should be preferred for bond strength. Although welding is definitely not safe for unskilled labor or poor supervision, it may lead to severe injuries.

Are rivets better than bolts?

Rivets offer a number of advantages over threaded bolts. They won’t loosen when subjected to vibration and can secure joints with short clamp length. On the other hand, compared to threaded bolts, they are cumbersome and time consuming to install and remove, and offer limited clamp load.

Why are airplanes riveted instead of welded?

The greatest benefit of using riveted joints in an aircraft is that they are stronger and more durable than welded joints. When two components are welded together, only the exterior of the components are joined together.

Do ships still use rivets?

Riveting has long been succeeded by welding to hold ships’ plates together. Only a few hundred U.S. workers still do the demanding work. Many work on Great Lakes ore carriers, in Toledo, Ohio, or at other companies in Duluth, Minn., and Sturgeon Bay, Wis. They do other heavy industrial work when not riveting.
20 нояб. 1997

Which aircraft parts should never be welded?

Alloy Steel Parts. Do not weld alloy steel parts such as aircraft bolts, turnbuckle ends, etc., which have been heat treated to improve their mechanical properties.