Yes, get a sink that is larger than the existing hole, and the installer can cut/router out the additional amount. Finding a sink that is an exact match will be nearly impossible. As well, the cutout on the existing hole is likely to be not as neat as one would like for an undermount.

Can you turn a drop in sink into an undermount?

Most any sink can be undermounted. Don’t make such a project out of it. The main requirement is adequate support. Do what you need to support it so that the top of it is flush or slightly lower than your 3/4″ roughtop.

Can you replace an Overmount sink with an undermount sink granite?





Replacing an overmount sink with an undermount sink will hide the sink lip underneath a countertop and provide clean, modern lines. Undercounter sinks form a waterproof seal with the use of silicone caulk, clamps and the appropriate curing time.

Can I change my sink to undermount?

By Valerie A. Undermount sinks install beneath the counter and add a streamlined look and feel to your kitchen counter. Replacing and updating an undermount sink is a simple way to add extra style to your kitchen or bath. We’ll walk you through how to remove an old undermount sink and install a new one.

What is undermount sink cutout?

An undermount sink is any sink that mounts to the underside of the countertop, rather than dropping in on top of the counter.

Can you use a drop-in sink with quartz countertop?

The drop-in sinks can fit in all solid surface countertops, including quartz and laminate.

Are drop-in sinks outdated?





Drop-in sinks represent a sink type that is affordable, flexible, and easy to install. But drop-in sinks do not have much in the way of resale value and are aesthetically outdated.

How do you replace a drop-in a sink?

Quote from the video:
Quote from Youtube video: And remove them cut the caulk around the sink with a utility knife gently push up from underneath to loosen the sink and lift it away use a putty knife to clean up any old caulk or grime drop.

Can you replace an undermount sink without removing the quartz countertop?

Simply put, yes, you can replace an undermount sink without having to remove the countertop. After the plumbing and garbage disposal are disconnected, the clips that hold the sink to the countertop from below must be removed. Then, the final step is to break the silicone adhesive bond and pull the sink out.

Can I install an undermount sink with laminate?

You may have heard that you can’t have an undermount sink with a laminate countertop, but that’s old news. Yes, you CAN have an undermount sink!

How do I make an undermount sink template?



Quote from the video:
Quote from Youtube video: So starting on our template. We've got our template kit in this kit we've got the x-acto knife which is a very sharp razor edge blade dual sided each side is equivalent.

How do you cut a hole in an undermount sink?

Cut a Hole for the Sink



Trace template with a pencil. Make sure it’s positioned square with the counter and in the proper location for plumbing. Drill several holes inside marked area large enough to accommodate jigsaw blade. For an undermount sink, insert jigsaw blade in the hole and cut about 1/4″-1/2″ inside line.

How do I use undermount sink template?

Quote from the video:
Quote from Youtube video: Put some blacks around it and used a bottom mount router with a bearing bottom mount bearing router. And use the sink as a template to cut the countertop.

How do you measure a sink cutout?



Place a tape measure or ruler end-to-end above the sink and do the readings. This measurement indicated how long your new sink should fit perfectly in place of the old one. The length of the sink should cover the cutout area plus an allowance for overmount or undermount placement.

How do you measure sink cut out?

Quote from the video:
Quote from Youtube video: With and sink basin depth of your existing sink disconnect the faucet in drain from the sink then remove the sink measure. The length and width of the cut out.

Do sinks come with templates?

Most kitchen sinks come with a template to trace onto your countertop. Your placement should be no further than 4 inches from the edge of the counter, and at least 2 inches from the back wall.

What is the standard cut out for a kitchen sink?

The most common sizes for a kitchen sink are 30″ or 33″, however a standard size could measure anywhere between 24″ and 36″ in length. The bulk of what you find while shopping will fall within this size range. Generally, sinks up to 30″ will contain one large single bowl.

How do you cut a plywood undermount sink?



Quote from the video:
Quote from Youtube video: So we're gonna route that out nice and clean with our circular saw at about 1/2 an inch 3/8 to half an inch.