Expanded profiles and improved product quality are making PVC a contender for indoor applications. Though gaining ground as an alternative to traditional wood, most industry estimates give cellular PVC only about 10% of the market for exterior trim.

Can I use PVC trim indoors?

Quote from the video:
Quote from Youtube video: But it's not just exterior areas of a home where it can be used certain rooms inside your house are great places for PVC trim as well most important is bathrooms.

How do you install PVC trim indoors?

To fasten the trim to the wall, I use 2 1/4-inch-long 15-gauge nails. On the interior of a home, nail holes in PVC can be filled with almost anything used with wood; Bond-and-Fill is a safe choice. To glue joints together, use PVC cement, since wood glues like Titebond II don’t work all that well with PVC.

Are PVC baseboards safe?

PVC trim is made from a type of plastic. This plastic is difficult to produce and gives off harmful VOCs both during its manufacturing and after its installation, for up to 5 years.

Is PVC molding good?

The benefits of using cellular PVC trim in building projects is that PVC won’t chip, crack, cup, or bow, and it won’t rot or be prone to insect infestation. Cellular PVC also doesn’t absorb moisture, so it’s an excellent choice for areas of a construction project that may come into contact with the ground.

Does PVC trim need to be painted?

PVC comes in white, so it typically has to be painted to match any existing trim; it also comes in the same shapes and sizes as wood, so it is nearly indistinguishable from any nearby trim that has not been replaced.

Will PVC trim hold a screw?

Fasten PVC trim with stainless steel screws or hot-dipped siding nails. When it comes to choosing your fasteners, don’t scrimp by using fasteners that won’t last as long as the vinyl trim. Stainless steel screws with small finish heads are the best choice because they’ll never corrode.

Can you nail through PVC Moulding?

The answer is yes, you can use nails to fasten PVC trim. Use a coil nailer and stainless 8d nails with full round head for PVC trim installation. For indoor trims, the 15-gauge finish nailer works well. However, nails are not the best fasteners available.

Can you use PVC trim in bathroom?

It’s nearly indestructible, but it can be cut and nailed just like ordinary molding. It comes in almost any profile that you might find in other types of wooden molding. For all intents and purposes, quarter-round PVC trim is the best option for showers.

How do you seal PVC trim edges?

Quote from the video:
Quote from Youtube video: Fasik your PVC trim welder can also be used to fill in the edges of a cut piece of PVC. Where instead of leaving open cells to trap moisture.

Does PVC trim melt?

PVC plastic is generally used for pipes, but it can be molded into other shapes. Melting PVC plastic can be a very simple project depending on your reason for melting it. If you simply need to melt the PVC enough that it is pliable, a heat gun will get the job done.

Is PVC better than wood?

PVC has a 0.5% water absorption rate, unlike wood, which has an around 8%. Hence, PVC materials will never rot, swell or decay and will last you for years.

Does PVC molding shrink?

And unlike wood (which mostly shrinks crosswise), PVC trim grows and shrinks along its length—a lot. A long run of PVC fascia on your eave or rake easily could shrink an eighth of an inch between summer and winter—enough to be noticeable, and enough to break a glue joint.

How do you install PVC molding in a bathroom?

Quote from the video:
Quote from Youtube video: And you can just apply the glue and glue it together and then let it sit for about 10 minutes and until you have like a perfect powder joint.

Is vinyl trim better than wood?

Plastic is definitely cheaper than wood. While plastic molding won’t rot or mildew, it is very brittle and not very forgiving. You’ll waste more in installation due to breakage. You have to pre-drill every nail hole because even thin finishing nails driven directly into it will cause it to break.

Can PVC trim be painted black?

Can PVC trim be painted dark colors? Only light-to-medium colored paints—with a light reflective value of 55 units or greater—should be applied to PVC trim. For example, using paint with an LRV below 55 units will void our product warranty. LRV is measured based on color and its ability to absorb heat.

How do you fill nail holes in PVC trim?

Quote from the video:
Quote from Youtube video: You can use a two-part methyl methacrylate like bond and fill or trim welder by extreme adhesives. These products must be mixed properly.

Can you caulk PVC trim?

Dap Polyurethane Sealant is a high-quality product that can be used to seal PVC trim. It is easy to apply and dries quickly to a tough, durable finish. This sealant is also waterproof and weatherproof, making it the best caulk for PVC exterior trim as well as other interior trim and applications.

What is the best adhesive for PVC trim?

Titebond Ultimate PVC Trim Adhesive and Sealant is a one-component, advanced polymer adhesive sealant designed for a variety of PVC trim, moulding, deck railing and beadboard installations. It adheres and seals PVC trim to virtually any material including wood, metal, masonry, other PVC trim and more.

How do you stick PVC trim to a wall?

Quote from the video:
Quote from Youtube video: So this will attach PVC to wall's drywall wood that kind of thing and this comes out really slow it's you need some muscle to get that out and this is just PVC cement. Which is great for PVC to PVC.

Can PVC be painted?

PVC can be painted but it has to be prepared correctly and it needs to be painted with paints that are formulated for PVC.