How do you remove an overflow tub cap?

Quote from the video:
Quote from Youtube video: In some cases you may only have one screw but all you need to do is remove. The screws and as you can see. The cover is removed.

How do you remove a twist and turn drain stopper?





Quote from the video:
Quote from Youtube video: But basically you'd grip it underneath that top part and just grip it tight turn it once he gets loose. Enough. Just keep turning. And it comes out.

How do you remove a twist plug from a bathtub?

Quote from the video:
Quote from Youtube video: So you want to get in a screwdriver a Phillips one or a flathead. And just open that screw up.

How do you take apart a twist drain?

Quote from the video:
Quote from Youtube video: It it'll sometimes be a set screw right here you'll take your screwdriver loosen that screw. And then this part will separate from the metal bar. And you just unscrew that metal bar.

How do you replace an overflow cap?

Quote from the video:
Quote from Youtube video: Once the screw is out the faceplate easily pulls. Off. This is the new faceplate I bought at home people for around five dollars it has a chrome finish and comes with in there screw.

How do you remove a bathtub drain cover without screws?





Quote from the video:
Quote from Youtube video: One get yourself some wd-40 spray it around the rim of the drain. Let it sit for about 15 minutes or so and then get yourself some pliers that fit into these holes in the drain.

How do you remove a tub drain lever?

Quote from the video:
Quote from Youtube video: So you really don't have to be that careful about what you're doing. It just comes out like I said it goes all the way down into the drain. So you just have to be careful about pulling this thing out.

What are the different types of bathtub drain stoppers?

The six most common types of bathtub drain stoppers are push-and-pull, pop-up, lift-and-turn, flip-it, toe-touch, and trip lever. It does not matter what type you have unless it must be fixed or replaced. The sole purpose of a bathtub stopper is to keep the water in the tub while you soak.

How do you remove bathtub drain cover?

Unscrew the knob on the top of the drain stopper to see if there is a set-screw underneath. If your drain stopper has a set-screw, use a small screwdriver or a hex key to unscrew it. Twist the entire stopper counterclockwise until it pulls free from its mounting post. Remove the mounting post using pliers.

How do you remove a push down plug?



Push and Pull

  1. With the stopper in the open position, unscrew the knob from the stopper base.
  2. Push the stopper closed to reveal the center post.
  3. Use pliers or a flat-head screwdriver in the center to loosen the slotted screw inside the center post in a counterclockwise direction.
  4. Lift the stopper from the drain.


How do you open a stuck swivel plug?

First off, you can try hot water. If it is just dirt and grime, hot water is often enough to loosen the debris. Run the hot tap for around 5 minutes and keep trying to move the swivel back and forth every 30 seconds or so.



  1. Hot Water.
  2. Plunger.
  3. WD40.
  4. Sink and Plughole Unblocker.



How do you remove a flip top plug?

Quote from the video:
Quote from Youtube video: Itself unscrews sometimes it'll be a little difficult to unscrew you may have to hold it and turn the rest of the pop up from underneath the sink. Now these rings just simply unscrew.