You can’t get it anywhere else because everywhere else is either traveler or switched hot. If you have the second setup then you can pull power at the light fixture, but that would typically require running a new cable to get to the new switch.
How do you wire a 4-way switch with 4 lights?
Quote from the video:
Quote from Youtube video: We then run a brown cable from l2 of switch two over to l2 or switch three. We then run a blue wire from l2 of switch one over to l3 of switch two.
How do you wire a 4-way switch with multiple lights?
Quote from the video:
Quote from Youtube video: Then will be wired over to the actual four-way switch and then wired up to the last three-way switch. And then on to the lights. And you could have however many lights your circuit will handle.
How should a 4-way switch be wired?
Quote from the video:
Quote from Youtube video: One wire on each of the brass screws it doesn't matter which color goes on which brass screw. Then you take the two wires that are going to box number three.
What is a 4way light switch?
A four-way switch is similar to a three-way, except it has four terminals (plus a ground terminal) and controls one fixture from three locations. This type of switch must be combined between two three-way switches to form a circuit. While more uncommon, this is a good option for large rooms with several entrances.
How do you add a light switch in the middle of a circuit?
Quote from the video:
Quote from Youtube video: So this circuit is wired with a two wire power cable in a two wire power cable out two devices on the rest of the circuit. And then the switch loop down to the switch.
Is a double pole switch the same as a 4-way switch?
Double pole light switches, also known as a four-way switch, are two single pole switches put together. Two separate circuits are controlled by one switch. This is typically used to control a circuit from multiple locations in a series of three switches on one circuit.
Can you replace a 4 way switch with a 3 way switch?
The two traveling wires can be swapped either way with no bad effect. If you want to abandon the other 3-way, you cannot remove or cover the box. You must remove the switch, rewire the circuitry, and install an approved cover plate.
Can you use a 4 way switch as a 3 way switch?
A 4way switch will not work in place of a 3way. The common toggle (in), whether up or down on a 3way switch, comes in contact with both switch leg (out) terminals. A 4way switch will not accomplish this. The 4way is more like two “separate” single gang switches, they will not work in unison as one.
Is a 4 way switch a DPDT?
A “4-way” (intermediate) switch is a purpose built double pole, double throw (DPDT) switch, internally wired in manufacture to reverse the connections between the input and output and having only four external terminals.
What is a loop switch?
Quote from the video:
Quote from Youtube video: Well you can still get a complete loop wiring a switch loop so what a switch loop is is instead of running a hot to your box first for your switch.
What is double pole switch?
What is a double pole switch? Double pole switches are connected to two separate electric circuits. They essentially contain 2 switches which are linked together and can complete the circuit either simultaneously or staggered.
What is a traveler wire?
The traveler wires run between the two 3-way switches, offering two potential pathways to complete the circuit and send power onward to the light fixture. It makes no difference which traveler wire goes to which traveler terminal on the switch; the traveler terminals are interchangeable.
Can a white wire be a traveler?
All white wires used as travelers between the 3-way switches should have their ends wrapped with black electrical tape or in a plastic wire nut.
Is the red wire a traveler?
Red and blue wires link traveler terminals of both switches. The red wire, which is connected to the first switch’s common terminal, leads back to the fixture.
Is the common wire the traveler?
There are three screw terminals on the body of the switch, in addition to the green grounding screw. One screw, known as the common, is a darker color than the others. The other two screws, usually a lighter brass color, are known as the traveler terminals.
What happens if you wire a light switch wrong?
But here’s the catch: If you connect the circuit wires to the wrong terminals on an outlet, the outlet will still work, but the polarity will be backward. When this happens, a lamp, for example, will have its bulb socket sleeve energized rather than the little tab inside the socket.
How do I know which wire is the traveler?
Quote from the video:
Quote from Youtube video: If no house current is found on any of the three wires. Go to the other switch. And do the same thing one of the wires will have house current and that wire is the hot wire mark.
