Can a ceiling fan be installed without a downrod?
Quote from the video:
Quote from Youtube video: And throw it away. Then you will mount the bowl of the trim that goes with your ceiling fan right up against the ceiling here.
How do you install a ceiling fan extension rod?
Quote from the video:
Quote from Youtube video: Step two says use a metal outlet box suitable for fan support and must support at least 35 pounds. So I know that my box is suitably mounted to support a ceiling fan.
How do you install a ceiling fan mount bracket?
Steps for Installing a Ceiling Fan Brace
- Step One: Turn Off the Power. Before you start, shut off the power in that part of your home.
- Step Two: Remove the Existing Light Fixture. …
- Step Four: Remove the Old Junction Box. …
- Step Five: Position the Ceiling Fan Brace. …
- Step Six: Install the New Box.
How much do they charge to install a ceiling fan?
Ceiling fan installation costs $246 on average and usually runs between $144 and $352. Hard to access or complex installations might hit $600. Labor costs $100 to $250. Residential fans cost $50 to $1,400 with commercial types hitting $3,500 or more.
Can you put a downrod on any fan?
In most cases, the “pole” or down rod, can be added to an existing fan. These down rods are available at hardware stores in different lengths (18, 24, and up to 36 inches), and in different finishes, such as brass, white, etc.
Can you add a downrod to a flush mount ceiling fan?
Since flush mount fans are anchored directly to the ceiling, they require an adapter and downrod to fit vaulted or sloped ceilings. The adapter and downrod both add height to the ceiling fan which may defeat the idea of a flush mount ceiling fan for your purposes.
Are ceiling fan extension rods universal?
Ceiling fan downrods are not universal. Each manufacturer creates downrods to fit with their particular design of ceiling fans. They differ in their UL rating, diameter, color, and type of installation.
How do I choose a downrod length?
The most common method used to find the right downrod length is to take the ceiling height, subtract the height of the ceiling fan (most fans are between 12 and 18 inches in height depending on the fan), and then subtract the desired hanging height (usually eight feet).
How long should a downrod be for vaulted ceilings?
Most ceiling fan manufacturers include a short downrod in the box, but to install a ceiling fan safely on a vaulted or cathedral ceiling you will need to have a total downrod length of at least 12 inches. A good rule of thumb is: The bigger the fan and/or the steeper the slope, the longer the downrod.
How long should a downrod be for a 20 foot ceiling?
You can use any length of downrod in a room with a 20-foot ceiling, but 120-inch (10-foot) downrods are designed with high ceilings in mind.
How long should a downrod be for a 10 foot ceiling?
12 inch
If your fan includes a 6 inch downrod, we recommend it on a 9 foot ceiling. This downrod, a 12 inch downrod, is perfect for a 10 foot ceiling. For an 11 foot ceiling, we recommend an 18 inch downrod and this will have your blades 8 ½ feet off the ground.
How far should fan blades be from the ceiling?
10 inches
The length of your downrod depends on the height of your ceiling. For safety reasons, a ceiling fan should always hang at least 7′ above the floor. Also, for maximum air flow there should be at least 10 inches of air space between the blades and the ceiling.
Can a ceiling fan be too close to the ceiling?
Height from Ceiling
Your ceiling fan’s blades need to be at about 10 to 12 inches from the ceiling to produce the best airflow. Unless it is a hugger ceiling fan that is designed to be closer to the ceiling, if your typical fan is too close or too far from the ceiling it won’t move as much air.
What is a ceiling fan downrod?
A downrod is a pipe, usually metal, that connects the fan, or specifically the motor housing of the fan, to the ceiling mount.
