Check for a wall switch that may have been overlooked. Also check for a remote that may control the light. Check with a voltage meter the power wire to the light (usually Blue or Black) is energized. Check the pull switch with Ohms setting to verify continuity.
Why is my ceiling fan light not turning off?
When the switch won’t turn the ceiling fan off, or even when the ceiling fan light won’t turn off, the first thing to do is to try and turn the fan off any other way. In most cases, this means using the pull chain. Many fans also have a pull chain dedicated to the lights only, so you should check that one as well.
How do you bypass the pull chain on a ceiling fan?
You bypass a ceiling fan pull chain by installing a wall switch. You can also use a remote control or smart device to control the ceiling fan. You can bypass the pull chain yourself or hire a licensed electrician. Bypassing the pull chain involves dissembling the fan and connecting wires.
How do you reset a ceiling fan light?
Quote from the video:
Quote from Youtube video: Use a screwdriver to detach the fan canopy locate the dip switch on the receiver. Then use a small screwdriver or ballpoint pen to create a new frequency. And record the new dip switch setting.
How do you fix a stuck pull chain light?
What to Do When the Pull Chain for a Light Is Stuck
- Turn off the power.
- Remove the lightbulb, fixture, covers, and accessories.
- Unhook the wiring.
- Replace the old switch and chain with new ones.
- Reattach the wires.
- Put all covers, accessories, and the fixture back in place.
- Reinsert the lightbulb.
- Turn on the power.
How do you fix a pull string light switch?
Quote from the video:
Quote from Youtube video: So with the fixture out you'll notice we've got two screws here holding our white wire and our black wire. To this fixture we're going to loosen those screws.
Do ceiling fans have a reset button?
There are several ways to reset a ceiling fan remote, but here’s the most straightforward: With the power off, hold down the button until the light on the remote flashes. Then, press and hold it again for 15-30 seconds to resynchronize the remote with your fan.
How do you troubleshoot a ceiling fan switch?
Quote from the video:
Quote from Youtube video: If you flip the switch. And you don't have power on the other side means your switch is bad easiest thing to do is go get a new switch.
Where is the DIP switch on a ceiling fan?
Quote from the video:
Quote from Youtube video: So the remote dip switches can be found on the back of the remote under the back cover so you take the back cover off usually they're somewhere near the battery.
How do you test a DIP switch?
The DIP test allows you to verify the current settings of the DIP Switch on the Frame CPU board (4810AR-002). To confirm this test, you must remove the Frame CPU board to verify the setting of the DIP Switch.
What is a fan DIP switch?
Ceiling fans have a dip (for “dual in-line package”) switch for setting the frequency. Follow these steps to set or reset the frequency of the ceiling fan. Turn off the circuit breaker that provides power to the ceiling fan.
How do you adjust a DIP switch?
Most DIP switches are very small in size and can be adjusted with a finger or finger nail. However, if you cannot move a DIP switch on a circuit board, use a small tool, such as a small screwdriver or paperclip, to gently adjust the switch.
Is DIP switch on or off?
DIP switches, sometimes written as “dip switches,” are on-off switches arranged in a line and packaged in a small box or housing. A DIP switch’s function is to provide a range of electrical inputs to a computer or electronic device based on the position of the switches.
How do you replace a DIP switch on a ceiling fan?
Quote from the video:
Quote from Youtube video: Gently grab the jumper and pull up want to move it over. Here you can do that by setting it back down. And pushing it on with the needlenose pliers.
Where are the DIP switches in Hampton Bay fan?
You’ll find dip switches on your ceiling fan in two places. First, inside of the remote. To find it, you may need to open the remote and look inside the battery compartment. The matching and communicating dip switch will be found inside of the ceiling fan.
