How do you wire a ceiling fan with two switches and remotes?

Connect the black wire from the ceiling to the black wire on the input side of the remote receiver module. Connect the blue wire from the output side of the remote receiver module to the blue wire in the fan. Connect the red wire from the ceiling to the black wire in the fan.

How do you wire a ceiling fan with a light kit and remote control?





Quote from the video:
Quote from Youtube video: We're going to connect our neutral to the white on this remote control power in and we're going to connect the black to the black from the power into the remote.

Can I use the fan remote and the wall switch?

There are four buttons for the fan: off, low med, high. The output of the receiver would then go through each wall switch which would allow the fan and lights to be turned off at the wall. If the wall switches are on, then the remote would control the fans and lights.

Can two switches control one ceiling fan?

When connecting two fans to the same circuit and controlled by one set of switches, you simply connect the fans’ neutral wires, their ground wires and their hot wires in parallel.

How do you put a ceiling fan light on separate switches?

Quote from the video:
Quote from Youtube video: For my light. Now all you do is you put it around the copper screw and tighten it up so your power comes in goes through the switch. Out here and to your light. And for your fan.

What do I do with the red wire when installing a ceiling fan?





Wiring a Fan With a Switch for Light and Pull Chain for Fan



In order for the light to be controlled by its own switch, the wiring between the switch and the fan unit needs a fourth wire, a red wire, to carry power to the light kit.

How do you split a light switch into two?

3 Answers

  1. Get a 2-gang box to replace your existing 1-gang box.
  2. Get a new switch.
  3. Remove your existing box and install the 2-gang box in its place.
  4. Run your supply hot wire to both switches.
  5. Connect the light/fan hot wire to one switch and the exterior light to the other.
  6. Join all neutrals and ground wires.


What is double pole switch?

What is a double pole switch? Double pole switches are connected to two separate electric circuits. They essentially contain 2 switches which are linked together and can complete the circuit either simultaneously or staggered.

How do you hook up two switches to one light?



Quote from the video:
Quote from Youtube video: We therefore take the live wire and divert this into the common terminal or switch one we run another wire from the common terminal or switch to and connect this to the lamp.

How do you wire a ceiling light with two switches?

Quote from the video:
Quote from Youtube video: The power white wire does not connect to the switch at all but is connected to the white wire of the 14 3 cable the wire connection is completed inside the switch electrical.

How does a light with two switches work?

Quote from the video:
Quote from Youtube video: You can clearly see that flicking either switch causes the light to change its state from on to off or off.

What do you call it when two switches control one light?



In building wiring, multiway switching is the interconnection of two or more electrical switches to control an electrical load from more than one location. A common application is in lighting, where it allows the control of lamps from multiple locations, for example in a hallway, stairwell, or large room.

Can you have two switches one light?

Controlling a light with two or more switches



A light or lights can be controlled by more than one switch. The usual practice in home construction is to use 3-way switches. “3-way” is the electrician’s designation for a single pole double throw (SPDT) switch.

What is intermediate switching?

Intermediate Switches are used for when there are three switches (or more) controlling one light. An example of this could be on a landing, with a switch at the bottom of the stairs, at the top of the stairs and at the end of the landing space.