What kind of drywall do you use for a basement ceiling?

While you can use the same drywall thickness for the walls and basement ceiling, most experts recommend a ⅝ inch thick sheet of drywall for ceilings. This is because ⅝ inch drywall is much less likely to sag between joists than standard ½ inch drywall.

Can you sheetrock a basement ceiling?





Installing basement drywall ceiling is the most cost effective methods to cover the floor joists and beams, and finishing your basement ceiling properly.

Does a basement ceiling need 5/8 drywall?

5/8″ drywall is rarely required in single-family residences. It was used historically because ceiling joists are often 24″ on center, and 5/8 resists sag. You can certainly use no-sag 1/2″ if you like.

Can you use 1/2 drywall basement ceiling?

Get that junk out of my face! TIP: If your ceiling joist are 24″ on center instead of 16″ then you need to use 3/8th’s for the ceiling instead of 1/2 inch. The 1/2 inch drywall is too heavy and may sag if the joist are to far apart.

What is the cheapest way to finish a basement ceiling?

Thin wood paneling — typically 1/8- to 1/4-inch thick — can cover an exposed ceiling, and it’s available in a variety of designs. Fir plywood, hardboard, even oriented-strand-board (OSB) are even more affordable, but these less-expensive options typically require paint or sealant.

Do you need mold resistant drywall in a basement ceiling?





Nor will it prevent mold in the case of flooding, when water saturates the drywall and the organic wood framing behind it. But in rooms that experience frequent humidity and are often subject to mold and mildew, such as bathrooms or basements, mold-resistant drywall is a good choice.

How much does it cost to drywall a basement ceiling?

Drywall: It costs around $1.50 per square foot to hang drywall in your basement. Ceiling: Basic ceiling installation can cost as little as $1-2 per square foot. But, if the project is complex, it can cost around $6 per square foot.

How do you finish a basement ceiling with drywall?

Quote from the video:
Quote from Youtube video: So much for for hanging drywall you absolutely have to have a drywall screw gun. We're actually going to start on this section of the ceiling. And go this way. We got a 10 foot sheet.

Which ceiling is good for basement?

Suspended ceilings are one of the most popular basement ceilings. Consisting of a simple grid and lightweight tiles or panels, a suspended ceiling covers exposed beams, ductwork, and electrical wiring, while allowing easy access for repairs or leaks.

What thickness drywall is used for ceilings?



5/8-inch thick drywall is the best drywall thickness for ceilings. Although you can use any type of drywall for ceilings as long as its installed correctly (even ultralight 1/4-inch thick drywall), a thicker panel is best. 5/8-inch thick drywall is the sturdiest which prevents sagging between ceiling joists.

Should you use purple drywall basement?

For low-activity spaces, PURPLE XP® Drywall protects against the moisture, mold, and mildew often found in basements.

How far can 1/2 drywall span on a ceiling?

What is the maximum joist spacing for ceiling drywall? Does it matter if the panels are oriented parallel or perpendicular to the joists? 1/2- or 5/8-inch drywall is 24 inches on-center. Ceiling drywall should always be installed perpendicular to the joists, even when they are 16 inches on-center.

Can drywall be installed on 24 centers?



drywall thickness, lightweight is ideal for ceilings that have joists 24 inches on center. Regular 1/2-in. drywall has always been approved for use on 24-in. spacing on ceiling framing, but because of heavy sagging insulation, wet ceiling textures, or higher humidity, either a 1/2-in.

How far can you span 5/8 drywall on ceiling?

5/8″ might span it, though you’ll end up with a lot of 6″ scraps due to 90 rather than 96″ spacing. 1/2″ not a chance – it will sag badly. If you strap it, you only need 1×3, and you don’t (IMHO) want it 24″ apart which is already a marginal spacing on ceilings – put it 16″ or even 12″ apart.

Which is a typical spacing for supports for drywall?

Drywall Screw Spacing for the Wall Field



Both the International Residential Code (IRC) and USG, the manufacturer of Sheetrock, note that the recommended maximum field screw spacing for wall drywall is 16 inches. Some builders like to space fasteners tighter than that, so they go down to 12 inches.

Is it better to nail or screw drywall?

Drywall screws provide a stronger hold, but cost a bit more than nails. When choosing drywall screws vs. nails, consider the size of your project and the materials you’ll be using. Use screws instead of nails when you are working on a ceiling installation or working with metal studs or frames.

Should I drywall the ceiling before the walls?



Yes, you should install drywall on the ceiling before the walls for multiple reasons: The drywall on the walls can support the ceiling pieces. You can create tight and fitted corners more easily. The pieces are easier and faster to work with from the top.

Should I use #6 or #8 drywall screws?

Drywall only, please: Don’t use drywall screws for sub-floors, tile backing or other non-drywall applications. These denser materials can break the smaller #6 screw during installation. Use a #8 or larger for these jobs.

Is drywall supposed to touch the floor?

Drywall should NOT touch the floor. Allow for floor and wall expansion without cracking the drywall by keeping a 1/2-inch (1.27-cm) space between them. This space also aids in preventing moisture from seeping if the floor floods.

Why do screws pop out of drywall?

Screws typically pop out of drywall for one of two reasons: they were installed too deep, or the studs have expanded and contracted. If you drive a screw too deep through the drywall and into the stud, it may pop out. As you may know, drywall panels are covered in a thin layer of paper-like material.