Can you have recessed lights in a shower?
Bathroom recessed lighting offers a clean, modern look that blends into the architecture of the bath space. And, unlike regular wall or ceiling mounted light fixtures, recessed bath lights can be installed in shower stalls or over tub areas.
Do you need a light in a walk-in shower?
Every shower (whether it is a shower cabin or a large walk-in shower) needs light. Light which differs in some areas from traditional living room or kitchen lighting.
What kind of light can I put in a shower?
Recessed lighting in the shower is probably the most common way to add lighting to your shower. You just need to make sure the fixture in your shower is wet rated. Can I put recessed lighting over a tub? Recessed lighting can be added to the ceiling over the tub.
Where should light be placed in shower?
It should be placed 75 to 80 inches above the floor and, like all vanity lighting, contain at least 150 watts — ideally spread over a fixture that’s at least 24 inches long so that the light will wash evenly over the hair and face.
Can LED lights go in the shower?
So, while you technically don’t need damp-rated LEDs in some parts of your bathroom, it’s safest to get them if you can. If you do find an LED light you love that’s not damp-rated, make sure it’s installed at least 600mm from showers, bathtubs, and basins so that they’re safe to use.
Do shower lights need to be GFCI protected?
A. Master electrician Sean Kenney responds: The short answer is yes. Although the NEC does not require either the switch or the light fixture to be GFCI-protected, most lighting fixtures designed for use in a shower stall require GFCI protection to meet UL requirements.
Should I put a light above my shower?
Quote from the video:
Quote from Youtube video: But it's directly above the shower or bathtub. Most the time you'll have the vanity lights.
What size recessed light in shower?
One recessed light is enough for smaller showers (3’x3′), but for safety and style, opt for two or more in large or luxury showers.
How do you light a walk-in shower?
If you install wall sconces in your shower and use wet rated lights, you can light your shower from within rather than outside. Wall sconces work whether you have a walk-in shower or a bathtub shower – just place them high enough to both light your shower and avoid contact with excess water.
Can Lights vs recessed lights?
Recessed lights, also known as downlights or can lights, are a type of lighting fixture installed into the ceiling or wall. They are designed to sit flush with the surface for a sleek and polished finish. The housing and electrical wiring components are hidden, and the bulb appears to glow from within the opening.
How far apart should 6 recessed lights be placed?
Generally speaking, recessed lights that are four inches in size should be placed four feet apart. Six-inch lights should be placed six feet apart. In other words, the diameter of the lights equals the space between them.
How far off the wall should recessed lights be?
between 1.5 feet and 3 feet
If you plan to illuminate an entire wall or accent particular architectural features or pieces of art, the rule of thumb is to place your recessed light fixtures between 1.5 feet and 3 feet from the wall. If your fixtures are fixed, they should be placed a bit closer to the wall.
How do you decide how many recessed lights are needed?
Figuring out recessed lighting spacing requires a bit of measuring and some simple math. A good general rule for placement is to divide the height of the ceiling by two. The result is the amount of space to leave between each light.
Can you have too many lights?
The mistake: Overly bright lighting or too much light. We humans are sensitive to light. Ask anyone who works in an office with harsh, bright lighting and they’ll tell you that excessive lighting can bring on headaches, nausea, anxiety and fatigue.
What can I use instead of recessed lighting?
Luckily, there is now a better alternative to recessed can lights. What many people are now using in their homes instead of recessed can lights is a light fixture called a disc light. The disc light is a very thin LED light, typically about an inch tall, that is mounted to the surface of the ceiling.
How do you diffuse recessed lighting?
Quote from the video:
Quote from Youtube video: First place the film on the acrylic lens. For this and most other applications the gloss or substrate side should be placed facing the LEDs and the lens or microstructure side should face the acrylic.
How far should you space downlights?
Recessed downlights are generally positioned 1.5 to 2 ft. away from walls with a space of 3 to 4 feet between each light. Dividing the ceiling height by two is a way of gauging how much space to leave between each downlight. Thus, if your ceiling is 8 foot high, place your lights 4 feet apart.
How many downlights do you need in a bathroom?
To calculate the number of downlights required in a bathroom you’ll need to; Measure the square footage of the room by multiplying its width by its depth. Multiply this square footage by 1.5. This will give you a guideline for the total wattage required to light the space.
Where should downlights be placed?
Position your recessed downlights approximately 2 feet away from the edge of your walls onto your ceilings as a starting point. Try to avoid creating any shadows. Then space your downlights evenly across the room for a balanced look.