13 Simple Steps to Switch a Light Fixture Into an Outlet

  1. Buy a New Receptacle. …
  2. Gather Your Tools. …
  3. Cut the Power. …
  4. Unscrew the Light Fixture. …
  5. Disconnect the Wires. …
  6. Set Aside the Light Fixture. …
  7. Restrip the Wiring. …
  8. Identify Your Wires.

Can you convert a hardwired light fixture to a plug in?

It’s that easy to turn a hardwired light fixture into a lamp that can be used in any (dry and safe) spot that an extension cord can reach! You can even use a Wireless Wall Switch or smart outlet to turn the plugged-in lamp on and off from a doorway or nightstand.

How do you wire a receptacle from a light fixture?

Quote from Youtube video: Going now to our light fixture. So now here we go we got all our ground wires. Together the ground wire from our 14 3 the ground wire from our light fixture the ground wire from our 14. To that's

Can you take power from a light for an outlet?

If there is a live power source in the light outlet as well as a switched conductor to control the light, then you can use the common neutral and tap into the constant power source in the outlet box so you have a live receptacle whether the light is on or not.

Can I get power from a light fixture?

It may be power supplied to one of the light boxes, and then a “switch loop” down to the switch – in which case you can tap continuous power at the light fixture where power is supplied on the feed side of the “switch loop.” If that does not happen to the fixture you’d like to connect to, you’ll need to run a non-

Can you put a plug on a ceiling light?

Yes, you can get a plug and attach the two wires from the cord to the non-earth (ground) pins of the plug. Look for something like this – you strip some insulation off the end of your cord, open the plug, attach the wires to the appropriate pins, and close the plug which also clamps the cord in place.

How do you wire a light fixture to an extension cord?

Quote from the video:
Quote from Youtube video: With the hot and the neutral wire on the on the light socket you want to have a light to go into said socket. Because you want to be able to test it.

How do you wire a chandelier to a plug?

Quote from the video:
Quote from Youtube video: Together. Step 4 unscrew and open your plug using needlenose pliers curved one end of the exposed. And twisted lamp wire carefully secure each lamp wire to either screw in your plug.