How do you replace an old electrical ceiling box?
Quote from the video:
Quote from Youtube video: Pull the cable out of the box. You can leave the box inside the cylinder. The new box will be supported by a ceiling fan brace. You can get one at any Home Center slip the brace into the ceiling.
Can I put a receptacle in an octagon box?
Quote from the video:
Quote from Youtube video: You simply attach this cover to the Octagon. Box after installing your duplex receptacle or stack switches directly to the cover.
Is an octagon box a junction box?
Octagon and Round Electrical Boxes
Octagon and standard-size round boxes range from 1 1/2 to 3 inches deep and are the standard box for ceiling- or wall-mounted light fixtures weighing up to 50 pounds. They provide much more room for wiring than shallow round pan boxes and can be used as junction boxes.
Can you use Octagon box for ceiling fan?
Ceiling fan rated octagon boxes are used to mount ceiling fans or heavy light fixtures.
What is a remodel junction box?
Remodeling boxes, also called old-work boxes, are electrical boxes designed to be installed after drywall has been hung. For example, you would install a remodeling box if you need an additional outlet for a home office or theater.
How do you tell if an existing junction box will support a ceiling fan?
The manufacturer must have marked the outlet box system to indicate that it is acceptable for ceiling fan installations. If the original box is not listed for this purpose, it must be retrofitted and attached securely to the building structure.
How much weight can a standard octagon box hold?
35 pounds
Standard octagon electrical boxes may be rated to support up to 35 pounds (depending on the installation method), while boxes with lightweight braces may be rated for only 10 or 15 pounds. Heavy-duty ceiling fan boxes may be rated for upwards of 50 pounds.
Can you put an outlet in the ceiling?
There are no restrictions about additional receptacles, and ceiling or high-wall mounting is certainly allowable.
How do you install an old work Octagon box?
Quote from the video:
Quote from Youtube video: You simply cut a hole in an existing wall or ceiling. Slide the box in the plaster ears catch on the drywall tile or plaster. And you snap in or snap on the old work clips on the side of the box.
Can my electrical box hold a ceiling fan?
Quote from the video:
Quote from Youtube video: If you want to put a ceiling fan in between joists you can use a fan support box like this which has a maximum weight of 70 pounds.
How much weight can a ceiling electrical box hold?
All ceiling boxes are required to support at least 50 pounds (NEC 314.27(A)), so you can assume the box will be able to support a simple light fixture. Boxes that are designed to support ceiling fans must be labeled as such, and must have a label listing the weight it can support if over 35 pounds (NEC 314.27(D)).
How do you reinforce a light box for a ceiling fan?
Quote from the video:
Quote from Youtube video: And go between the ceiling joists and lay that 2×4 down in there and then just come down here and shoot a screw up through the box up through into the 2×4.
What is a retrofit box?
Sometimes called a remodel box or retrofit box, an old work electrical box can be inserted into an opening in the wall covering. The box attaches directly to the covering, not to the studs. It is used when remodeling rather than when constructing new wall systems.
How do you install a junction box in a ceiling?
Quote from the video:
Quote from Youtube video: Once you have the wire in the box you're going to push. The box back into the ceiling. And the box will have this particular one has three clips. So as you screw. The screws in the clips.
What is a pancake box?
Quote from the video:
Quote from Youtube video: Channel. This box right here is called a pancake box it's called a pancake box because it's pretty much the size and shape of a pancake.
Can I hang a ceiling fan from a pancake box?
You’ll use a half-inch pancake electrical box to secure your ceiling fan to the joist. Hold it up to the ceiling, centered on the joist, and trace its outline with a pencil. Cut out the hole with a drywall saw. You’ll need to make a new hole for the ceiling fan pancake box, usually right next to the light fixture hole.
How do you install an electrical round ceiling box?
Quote from the video:
Quote from Youtube video: You can also cut the hole manually with a jab saw I took the drywall circle out and put the new electrical sealing box in place.
How do you use a pancake electrical box?
Quote from the video:
Quote from Youtube video: There's a knockout on there's different knockouts in the back side of this box. And the fire block goes right across the hole.
How do you hang a pancake ceiling box?
Quote from the video:
Quote from Youtube video: And you can use a half inch mounting box or a pancake. Box like this on five eighths – lots of lots of times ceilings are 5/8 okay so I'm just going to set this up here and I had a pre marked before.
Can you surface mount a pancake box?
In many instances the existing fixtures are mounted on 3 inch pancake boxes that are surface mounted. Some of the fixtures have a shallow canopy, and where they are mounted on a pancake box the canopy does not sit flush with wall or ceiling exposing the connections to the weather.
