How do you crimp sleeves?
Quote from the video:
Quote from Youtube video: Now this is gonna flare the sleeve so I don't crush into the mono itself with an edge. Once you're in position give it a good squeeze.
How do you crimp a wire sleeve?
Quote from the video:
Quote from Youtube video: First make an eye by passing the cable through the sleeve. And then doubling it back before swaging position the cut end of the cable.
How do crimping sleeves work?
Quote from the video:
Quote from Youtube video: The sleeves are positioned on the first piece of net. And the other piece of the netting is then pushed through the sleeves.
How do you use the 4 slot crimping tool?
Quote from the video:
Quote from Youtube video: And this will be utilized with 10 and a half gauge smooth wire as well 14 and a half and 15 and a half gauge barbed wire. And then your top slot is a c45 it will be utilized.
How do you crimp properly?
Quote from the video:
Quote from Youtube video: The end of the barrel. Then insert the wire and terminal into the crimper. If your crimping tool features colored markings match the insulation with the color on your crimping.
What are crimping tools?
Crimp tools are a varied collection of devices used to join materials or components by pressing them together and creating a seal or crimp. One of the most common uses of crimping tools is the attachment of connectors to the end of electrical cables.
How do you crimp sleeves without a tool?
Just crush the thing with any tool you have around. If you can use a big vise to crush them down, that’s probably the most ‘controlled’ way. Otherwise, use pliers, or get a hammer and chisel and dent the sleeve at two or three points with the chisel.
What is a crimping loop sleeve?
Crimping is used to either join separate cables together, or create a loop in the cable, either on the ends or even anywhere between the ends. That the desired outcome is a loop in the wire rope, cable crimp sleeves are also often referred to as loop sleeves.
How do you use wire sleeves?
With your right hand, push the sleeving along its axis towards your left hand. It should compress, and expand radially. Once compressed/expanded, push far enough over that your right hand can grasp the bundle of wires along with the sleeving. Clamp down on the sleeving & wires with your right hand.
How do you splice a crimp and cut tool?
Attach a wire strecher to the broken or stretched out wire to remove slack. Cut out slack, or add new wire to provide about 1-1/2” overlap. Slip Splice-It splice (sold separately) over loose ends and crimp four times. Remove stretcher and you are done.
How do you use an electric fence crimping tool?
Quote from the video:
Quote from Youtube video: You slide that on the on the gate cable. The slot on the hot wire. Using either your five and one or your crimping tool just start at one end and work along just overlap in the Crump's each. Time.
How do you use a crimping tool on a fence?
Quote from the video:
Quote from Youtube video: It's always easiest to slide all the crimps onto one side of the broken wire. First. And then fit in the other wire. Once your tool is set crimp down the first crimp.
How do you crimp fence wires together?
Quote from the video:
Quote from Youtube video: Sleeve. And you've done in the last one leave the tool hanging there take the chain strainer. Off. And then tie off slight lazing loop and then under tight.
How do fence pliers remove staples?
Quote from the video:
Quote from Youtube video: Like this on it that is the cat's meow for pulling fencing staples all you're gonna do is hook the staple like so between the pinchers and pry down on it like this and I'll rip it right out.
How do you hammer a staple fence?
Quote from the video:
Quote from Youtube video: In long in in first with a couple of taps. Once you get it started. Go ahead and beat it down and your finished product should look something like that. Well. That's how you do it hope it helps.
How do you hammer a staple?
Quote from the video:
Quote from Youtube video: So you don't break your hand you want to use the side of your hammer. That'll get your staples. Started you can pound it in with the side of your hammer to finish it.
What is a fencing staple?
Quote from the video:
Quote from Youtube video: So no matter which direction you turn a bekaert staple you have a right-hand cut slash. So what that does is penetrates into the wood. And forces the legs outward.
