How far down should a light hang?
How far down do you want the fixture to hang? The bottom of the pendant should be at least 75-90cm / 30” from the table top. If you opt to hang more than one pendant, there should be equal space between each pendant (around 2ft).
How high should a post light be?
POST-MOUNTED LIGHT FIXTURES
A standard residential post should extend from the ground approximately 6 feet high, and the light on top should add an additional 2 feet, bringing the total height of the fixture to approx. 8 feet high.
Where should post lights be placed?
Since they typically shine in all directions, post lights are best used in an expansive area like the bottom or top of a shorter driveway, or a couple more placed evenly along a longer drive.
How deep should a lamp post hole be?
Dig a hole that is 18- to 24-inches deep and 6 inches in diameter. Clear out rocks and loose dirt clods as you go. You need a smooth, solid surface when you’re not using cement. Place the post in the hole you just dug.
How low should a pendant light hang in a hallway?
You should have 7 feet of clearance (minimum) from your floor to the bottom of your light if you have a one-level entryway.
How low should a pendant light hang from the ceiling?
As a general rule, pendants should hang 12-20 inches below an 8-foot ceiling. For each additional foot of ceiling height, add 3 inches. For example, in kitchens with a 9-foot ceiling, the pendant should hang 15-23 inches below. The pendant height can also be measured up from the surface below the light.
How high should an outdoor light be mounted?
around 66 to 72 inches
For most homes, the ideal exterior light height is just about eye-level for most people. In most front door and entry areas, your outdoor sconces and wall lights should be positioned so that the center point is right around 66 to 72 inches above the floor.
How high should a porch light be mounted?
Lighting professionals generally agree that front and back porch lights work best when placed just above eye level, usually at between 65 and 67 inches above the ground or porch floor.
How do you measure the distance of a street light pole?
Calculation: Spacing between each Pole=(LL*CU*LLD*LDD) / Eh*W. Spacing between each Pole=(33200×0.18×0.8×0.9) / (5×11.5) Spacing between each Pole= 75 Foot.
How do you put a lamp in a post?
Step-By-Step Guide in Installing an Outdoor Post Lamp
- Step #1: Dig the posthole and trench. …
- Step #2: Install the PVC conduit. …
- Step #3: Fill the posthole with concrete. …
- Step #4: Set the post into the concrete footing. …
- Step #5: Install the lamppost. …
- Step #6: Brace the lamppost perfectly plumb. …
- Step #7: Make the wire connections.
How do you anchor a light post?
Quote from the video:
Quote from Youtube video: The hole should be drilled one happens deeper in base materials when the anchor will penetrate. The deeper the embedment of the anchor in the base material.
How deep is a post hole?
Dig post hole so diameter of the hole is 3 times the width of the post (i.e., the hole for a 4” wood post should be about 12 inches wide). The depth of the hole should be 1/3-1/2 the post height above ground (i.e., a 6-foot tall fence would require a hole depth of at least 2 feet).
How long does it take concrete to set in a post hole?
The concrete sets up in 20 to 40 minutes, so you can quickly move on to the next stage of the project (a great convenience when setting fence posts) or backfill the hole to finish the job. Under normal curing conditions, you can apply heavy weight to the post (a basketball backboard, for example) after just 4 hours.
Can you put dry concrete in a post hole?
Quote from the video:
Quote from Youtube video: Because. There is no mixing you simply pour it into the hole dry. Then add water when digging your post hole it is important that the diameter of the hole will be three times the width of the post.
How deep should an 8 foot post be in the ground?
about 2 feet deep
For an average fence post, about 6 to 8 feet tall, prepare to dig a post hole about 2 feet deep. To install a fence post, you’ll need a shovel or post digger, a 6-foot level, soil, and gravel or crushed stone.
How many bags of quikrete do I need for a post hole?
Most fence post holes will need between 1 – 4 bags of concrete to securely hold the post in place. The best way to determine the size of the hole is: Diameter of the hole is 3 times the width of the fence post.
Can you put fence posts in without concrete?
Fence posts can be anchored with gravel, resulting in surprisingly strong anchors that also drain away moisture to prevent water damage. Posts can also be secured using fence post spikes – which are specially made metal anchoring spikes that don’t require digging to install.
How many bags of cement do I need for a fence post?
4 bags
1 – 4 bags of concrete per fence post are typically what’s needed. This depends on the type of soil, fence design, height, post size and bag weight. In general the depth of the post’s hole needs to be 1/3 to 1/2 of the above ground height of the post.
Should I use concrete or cement for fence posts?
Concrete provides a strong foundation for wooden fence posts, but can rot them more quickly. Setting them in dirt, with or without gravel or crushed rock depending on your soil type, can help the posts last longer before going rotten. You can also use metal fence post anchors to prolong their life.
How big should the hole be for a 4×4 post?
12 inches
The diameter of your post hole should be three times the diameter of your post. So, if you’re planning on using a four-inch round or 4×4-inch square post, your post hole will need to be 12 inches in diameter. For a six-foot-high fence post, we would need a hole that’s 36 inches deep and 12 inches in diameter.
