Mains halogen bulbs can be dimmed with any standard dimming system or dimmer switch. We recommended that the dimmer should have a 25% higher wattage rating than the fittings to allow for any increased load which can happen when the bulbs are coming to the end of their life.
Do you need a special dimmer for halogen lights?
All halogen bulbs are dimmable and finding a dimmer switch for halogen is easy. If you just have one bulb that you want to dim, any dimmer should do the job for you. If you are planning on dimming several halogen bulbs with the same dimmer, just multiply the bulb count with the wattage of the bulbs.
What size dimmer do I need?
Choose a dimmer with a wattage rating that meets or exceeds the total wattage of all the light bulbs the dimmer will control. For example, if the dimmer controls a fixture with ten 75-watt bulbs, you need a dimmer rated for 750 watts or higher.
What wattage dimmer switch do I need?
A rule of thumb commonly used to calculate a load for LED dimmers is to divide the stated maximum load by 10. For example a 400W dimmer switch should have no more than 40W of LED bulbs connected to it, which would equate to eight 5W bulbs.
What is a dimmer capacity?
Common dimmer wattage ratings are 150 watts, 300 watts, 600 watts and 1000 watts. 150 watt rated dimmers are usually for a single bulb. Wattage rating is usually on a sticker on the light fixture.
Can you use a dimmer on halogen bulbs?
Bulbs: CAN I DIM MY HALOGEN LIGHTS? Mains halogen bulbs can be dimmed with any standard dimming system or dimmer switch. We recommended that the dimmer should have a 25% higher wattage rating than the fittings to allow for any increased load which can happen when the bulbs are coming to the end of their life.
Do LED dimmers work with halogen bulbs?
Use an LED Dimmer switch
If you dim a standard bulb such as halogen and the light intensity is reduced to 50% via dimming then the halogen bulb will give almost no light output, however if you do the same with an LED bulb the LED light will give 50% of its light capacity at its fullest.
What happens if you overload a dimmer switch?
new jersey — Did you know that you can accidentally overload a dimmer switch? If you do, it can become hot to the touch – sometimes extremely hot – to the point where it can become a fire hazard. Here’s how to avoid this happening using only some simple math. The majority of dimmer switches are rated for 600 watts.
Do dimmable LED bulbs need a special dimmer?
A standard dimmer switch cannot be used with an LED light as you will never be able to dim the LED light either completely or not very well. LED lights need their own special electronic dimmer switch to have a fully functioning and dimming light.
Do dimmers save electricity?
Not only do modern light dimmers save you energy, but they also extend the life of your light bulbs! Dimmers use a “Triac Switch” to rapidly turn a light circuit on and off to reduce the energy flowing to a light bulb. This switch will cut the energy running to the fixture up to 120 times in one second.
Do LED lights need special dimmer?
LED lights require a dimmer that is rated for LED loads. Regular dimmers designed for incandescent or halogen light will not work with LED lights. The dimmer needs to be specifically rated and marked as suitable for LED lights, as regular dimmers used on LED lights will cause an undesirable blinking effect.
What is a 3 way dimmer?
With a three-way dimmer, you can control a light with two switches. You will need a three-way dimmer and a three-way switch. This lets you dim from one location and turn the lights on and off from another. If only one switch controls the light, purchase a single-pole dimmer.
How many wires do I need for a dimmer switch?
There will be three wires: one black, one white, and a separate ground wire that may be bare copper or is sometimes wrapped in green. Identify the different colored wires, and use needle-nose pliers to attach the wires to the dimmer in the same way they had been attached to the switch (Image 1).
Can you have 2 dimmers on a 3-way switch?
The answer is no. If you set up a 3-way switch for your light, there can’t be multiple dimmers. However, there are workarounds to this. Such as placing one dimmer on the line leading into the first switch.
Do dimmers need neutral?
Since most Insteon-compatible wall switches and dimmers require a neutral wire connection to operate, you need to know if you have one of these in place. A neutral wire is a type of wire in which carries currents back to the source of power and or regular voltage.
Can you put a dimmer switch on any light?
A dimmer switch can be installed anywhere that an existing on or off switch is in place. Replacing the current toggle switch with a dimmer switch will allow you to change the lights’ brightness, so long as you are using a light bulb that is compatible with the dimmer you have chosen.
What happens if you use non dimmable bulb in a dimmer?
If you install a non-dimming LED bulb in a circuit with a dimming switch, it will likely operate normally if the dimmer is at its 100% or fully on. Dimming the bulb, will likely cause erratic behavior such as flickering or buzzing and ultimately may cause damage to the bulb.
Do I need special light bulbs for a dimmer switch?
A modern dimmer switch switch functions the same way as if you turn a light ON and OFF really fast. These switches are designed to work with CFLs, Halogens, and Incandescent light bulbs. But the bulbs need to be of the latest technology and must have the feature of dimming to allow it to be used with a dimmer switch.
What kind of bulbs can be used with dimmer switches?
Incandescent and halogen light bulbs work well with dimmer switches. However, due to many advances in lighting technology, CFLs and LEDs are catching up and doing a good job, the same as incandescent light bulbs do.
How do I know if my bulbs are dimmable?
The package or bulb should say if it’s dimmable and tell you which dimmer switches are compatible. You may get varying results with different CFLs and their compatible dimmers. Sometimes the CFL will only dim down to a certain percentage, about 10-40% of full light levels, before the light cuts off completely.
Can you use Dimmable halogen bulbs in non-dimmable fixtures?
You can use a dimmable LED lamp in a non-dimmable circuit. You should NOT use a non-dimmable lamp in a dimmable circuit as it may cause damage to the lamp and or circuit.