How do you wire a new dimmer switch?
Quote from the video:
Quote from Youtube video: A single-pole dimmer like this one has two wires that you're going to connect to the wires coming out of the box and a separate ground wire. Go ahead and take the stripped wires twist.
Does it matter which wire goes where on a dimmer switch?
Unless the new dimmer is specifically marked with LINE and LOAD or similar, it doesn’t matter which wire goes to which screw/pigtail in a simple two wire switch or dimmer. Since your new switch can be used as a three way, the instructions should say which screw should not be used.
Does a dimmer switch need different wiring?
New dimmers have either a green grounding wire or a green ground screw that you’ll have to connect to a grounding source if one is available. Houses wired with plastic-sheathed cable almost always have bare copper ground wires that you’ll connect to the toggle dimmer switch.
What are the 3 wires on a dimmer switch?
Single pole switches will have 3 wires: a hot lead wire, a ground wire, and a traveler wire. Older homes may only have a hot lead and a ground wire. If you have less than three wires, stop and call an electrician.
Why does my dimmer switch have 4 wires?
Since the switch cuts the power on and off, there will be a black wire coming into the switch and a black wire leaving. The whites are normally just connected together with a wire nut and the coppers are connected together with a wire nut or grounded to a metal junction box. So the new switch has four wires.
What does L1 L2 and C mean on a dimmer switch?
The wires from your old switch can be connected either way round to the “C” and “L1” terminals of the dimmerswitch. If you are using a push-on/push-off dimmerswitch there is a spare terminal (L2) that you will not need to use for a 1-way circuit.
What happens if you wire a light switch wrong?
But here’s the catch: If you connect the circuit wires to the wrong terminals on an outlet, the outlet will still work, but the polarity will be backward. When this happens, a lamp, for example, will have its bulb socket sleeve energized rather than the little tab inside the socket.
When wiring a light switch what Colour is the live wire?
Blue and Yellow: Hot Wires
While these wires are live wires and carry power, you might only see yellow wires as switch legs to ceiling fans or outlets controlled by light switches. You may also see blue wires used in three- or four-way switches.
How do you wire a dimmer switch with two black wires?
Quote from the video:
Quote from Youtube video: Cap. Next connect the two remaining wires from the old switch to the two black wires on the new control it doesn't matter which black wire you choose because they're interchangeable.
How can I tell which wire is common on a 3-way switch?
Quote from the video:
Quote from Youtube video: And take a tester and see which one of the black wires is a live wire. So this is our live wire this is going to be our common terminal. Now if you try both of these black wires.
How many wires does a dimmer switch have?
three wires
Attach the Dimmer Switch
There will be three wires: one black, one white, and a separate ground wire that may be bare copper or is sometimes wrapped in green.
Where do the red and black wires go on a dimmer switch?
The dimmer switch has a ground wire, a red wire, a black wire, and a striped red wire. According to the instructions on the dimmer the black wire should be connected to power; the red wire should go out to the light; the striped red wire should just be capped; and the ground should go to the ground.
How can you tell which wire is common on a 4 way switch?
Quote from the video:
Quote from Youtube video: This group of wires goes to the upstairs switch in this group that's connected to the switch still goes downstairs. As you can see that's the hot set of wires this is just a little voltage tester.
Where does the red wire go on a 3-way dimmer switch?
The black hot wire connects to the far right switch’s common terminal. Red and blue wires link traveler terminals of both switches. The red wire, which is connected to the first switch’s common terminal, leads back to the fixture.
Can you connect 4 wires to 2 wires?
The first option is to use the black wire of the 12-3 cable as the hot wire. Connect the black wires of both cables together, and connect the common white wires together. Cap the red wire and leave it untouched in the junction box. Place plastic twist caps on all splices.
Why is there two black wires in light switch?
Black means hot, white signifies neutral, and green indicates ground. However, if you need to rewire a light switch or a plug socket, you may occasionally come across two black wires. It’s essential that you determine which black wire is hot before proceeding.
Why are there two hot wires?
The reason for multiple hot/neutral wires for one outlet is that the outlets are daisy-chained together. This means hot/neutral is only coming from one of the wires and it is being sent to the other wire.
How can you tell the difference between a hot and neutral wire?
Here’s a rundown of electrical wires: The black wire is the “hot” wire, it carries the electricity from the breaker panel into the switch or light source. The white wire is the “neutral” wire, it takes any unused electricity and current and sends it back to the breaker panel.
What happens if you mix up hot and neutral wires?
This happens when the hot and neutral wires get flipped around at an outlet, or upstream from an outlet. Reversed polarity creates a potential shock hazard, but it’s usually an easy repair. Any $5 electrical tester will alert you to this condition, assuming you have a properly grounded three-prong outlet.
Which wire is positive when both are black?
If the multi-colored wire is black and red, the black wire is the negative wire, while the red one is positive. If both wires are black but one has a white stripe, the striped wire is negative, while the plain black wire is positive. Look in the owner manual to determine which wires are negative in a car.
