However, if the range receptacle is within six feet of the kitchen sink, then it will require GFCI protection. The bigger impact will be felt in garages, outdoors, laundry areas, and basements. These areas require all receptacles to be GFCI protected regardless of distance.
Does A range outlet need to be GFCI protected?
No in any case. Electric range circuits and receptacles do not require GFI protection, and if this is a regular receptacle for a gas range it is behind the range and not serving the counter, so again ,no GFI required.
What kitchen appliance is required to be GFCI protected?
Per 210.8(A)(6), GFCI protection is required for all 15A and 20A, 125V receptacles that serve kitchen countertop surfaces in a dwelling unit. GFCI protection is not required for receptacles serving appliances like dishwashers, or convenience receptacles that do not supply countertop surfaces.
Does outlet under sink need to be GFCI?
210.8(A) requires receptacles serving the kitchen countertop to be GFCI protected. It also requires GFCI protection for receptacles within 6′ of a sink, but only sinks not in a kitchen.
Do all outlets in the kitchen need to be GFCI?
Not all your kitchen outlets need to be the GFCIs, but they are required to be if they’re within six feet of a kitchen sink or if they serve a countertop. Near laundry room sinks. Any receptacles within 6 feet of a sink or washing machine should be GFCIs.
Do you need GFCI near stove?
Do all of the outlets in my kitchen need to have ground-fault circuit interrupters? In kitchens, all outlets that serve countertop surfaces should be equipped with GFCI outlet protection. That would include any outlets on walls, behind wet areas (sinks, etc.)
Where are GFCI outlets required 2020?
The 2020 NEC is very clear that GFCI protection is only required for 125‐volt, 15‐ and 20‐ampere receptacles in areas having an equipotential plane, in outdoor locations, in damp or wet locations, or in dirt confinement areas for livestock.
How far does a GFCI have to be from a kitchen sink?
It must be a GFCI, and it must be within 3 feet of the edge of the sink. Either behind or beside the sink is acceptable — across from the sink on an opposite wall is not. If the bathroom has two sinks, each must have an electrical receptacle within 3 feet.
What is code for electrical outlets in kitchen?
In kitchens, electrical outlets should be placed no farther than 48 inches apart, so that no point on the countertop is more than 24 inches away from a receptacle. Any countertop 12 inches wide or more should have an outlet on the wall behind the countertop.
Do dishwashers require a GFCI outlet?
Kitchen dishwashers installed in dwelling units require GFCI protection whether hard wired or cord and plug connected. Code Change Summary: A new subsection was added regarding dwelling unit kitchen dishwashers. Now, outlets that supply dwelling unit kitchen dishwashers must have GFCI protection.
Can you put 2 GFCI outlets on the same circuit?
Having 2 GFCIs on the same circuit has no added benefit and can cause the occupant confusion when it comes to tracking down a tripped GFCI outlet. When the GFCI is installed on the lead outlet, there is no need to wire multiple GFCIs on the same circuit for residential use.
Does a microwave need a GFCI?
A GFI or GFCI outlet is needed if the microwave is located less than 6 feet from a water source such as the edge of the sink, toilet, shower, etc. It is also needed if located outdoors, garages, kitchen counter tops, near laundry, utility sinks, wet bar sinks and near swimming pools.
Is there a difference between GFI and GFCI?
Ground fault circuit interrupters (GFCI) and ground fault interrupters (GFI) are the exact same device under slightly different names. Though GFCI is more commonly used than GFI, the terms are interchangeable.
Where are GFCI outlets required?
The NEC mandates GFCI protection in many areas of the home: bathrooms, garages, outdoor receptacles, crawl spaces, basements, kitchens and anything within six feet of a sink or water source. While that may seem like a lot, the entirety of a home is not covered.
Can a refrigerator be plugged into a GFCI outlet?
Residential Kitchen
In a dwelling unit (residential), GFCI protection is only required for kitchen receptacles that serve the countertop surfaces. There’s no requirement to GFCI protect receptacles that serve a refrigerator. Unless the fridge is plugged into a countertop receptacle.
Can you install a GFCI without a ground?
A GFCI without ground wire isn’t ideal, but it’s better than a 2-prong outlet. A GFCI outlet will work without a ground wire and it’s legal.
Can you install a GFCI outlet anywhere?
GFCI outlets should be installed in any potentially wet or damp areas such as kitchens, bathrooms, laundry rooms, outdoors, basements, garages and workshops.
What happens if you wire a GFCI backwards?
If you miswired the GFCI it may not prevent personal injury or death due to a ground fault (electrical shock). If you mistakenly connect the LINE wires to the LOAD terminals, the GFCI will not reset and will not provide power to either the GFCI receptacle face or any receptacles fed from the GFCI.
Can I ground a GFCI to a metal box?
Don’t ground to the electrical box. Connecting the ground wire to a metal electrical box will energize the box in the event of a short circuit. The box could overheat and start a fire, or someone could get a shock from touching it. The connection is often unreliable.
Why is the ground screw green?
The grounding screws help to prevent shock. The ground conductor is fastened with ground screws that thread into the box. There is a green dye finish on the screws.
Will a loose ground wire trip a GFCI?
An Actual Ground Fault
If the GFCI detects a ground fault leakage of 5mA it will trip. This leakage is caused by a hot wire touching the ground somewhere on the electrical line such as an appliance or even the outlet itself.
